ISO 13061-16:2017

INTERNATIONAL ISO
STANDARD 13061-16
First edition
2017-06
Physical and mechanical properties of
wood — Test methods for small clear
wood specimens —
Part 16:
Determination of volumetric swelling
Propriétés physiques et mécaniques du bois — Méthodes d’essais sur
petites éprouvettes de bois sans défauts —
Partie 16: Détermination du gonflement volumique
Reference number
ISO 13061-16:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 13061-16:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13061-16:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Stereometric method . 1
5.1 Apparatus . 1
5.2 Preparation of test pieces for stereometric method . 2
5.3 Procedure . 2
5.3.1 Determination of the dimensions of test pieces at absolutely dry (oven-
dry) condition . . 2
5.3.2 Determination of the dimensions of test pieces in fully saturated condition . 2
5.4 Calculation and expression of results. 3
6 Immersion method . 3
6.1 Apparatus . 3
6.2 Preparation of test pieces for immersion method . 3
6.3 Procedure . 3
6.3.1 Determination of the volume of test pieces at absolutely dry (oven-
dry) condition . . 3
6.3.2 Determination of the volume of test pieces in fully saturated condition . 4
6.4 Calculation and expression of results.
...