ISO 10642:2004/Amd 1:2012
(Amendment)Hexagon socket countersunk head screws - Amendment 1
Hexagon socket countersunk head screws - Amendment 1
Vis à tête fraisée à six pans creux — Amendement 1
General Information
Relations
Frequently Asked Questions
ISO 10642:2004/Amd 1:2012 is a standard published by the International Organization for Standardization (ISO). Its full title is "Hexagon socket countersunk head screws - Amendment 1". This standard covers: Hexagon socket countersunk head screws - Amendment 1
Hexagon socket countersunk head screws - Amendment 1
ISO 10642:2004/Amd 1:2012 is classified under the following ICS (International Classification for Standards) categories: 21.060.10 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 10642:2004/Amd 1:2012 has the following relationships with other standards: It is inter standard links to ISO/IEC 14882:2003, ISO 10642:2004, ISO 10642:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 10642:2004/Amd 1:2012 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 10642
Second edition
2004-03-01
AMENDMENT 1
2012-07-01
Hexagon socket countersunk head screws
AMENDMENT 1
Vis à tête fraisée à six pans creux
AMENDEMENT 1
Reference number
ISO 10642:2004/Amd.1:2012(E)
©
ISO 2012
ISO 10642:2004/Amd.1:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 10642:2004/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, a
...
NORME ISO
INTERNATIONALE 10642
Deuxième édition
2004-03-01
AMENDEMENT 1
2012-07-01
Vis à tête fraisée à six pans creux
AMENDEMENT 1
Hexagon socket countersunk head screws
AMENDMENT 1
Numéro de référence
ISO 10642:2004/Amd.1:2012(F)
©
ISO 2012
ISO 10642:2004/Amd.1:2012(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord écrit
de l’ISO à l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2012 – Tous droits réservés
ISO 10642:2004/Amd.1:2012(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux de
normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales,
en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec la Commissio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...