ISO 23104:2020

INTERNATIONAL ISO
STANDARD 23104
First edition
2020-01
Space link extension — Cross
support transfer service —
Monitored data service
Reference number
ISO 23104:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 23104:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 23104:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.
This document was prepared by Consultative Committee for Space Data Systems (CCSDS) (as CCSDS
922.1-B-1, April 2017) and drafted in accordance with its editorial rules. It was assigned to Technical
Committee ISO/TC 20, Space vehicles, Subcommittee SC 13, Space data and information transfer systems
and adopted under the “fast-track procedure”.
Any feedback or questions on this document should be directed to the user’s national standards body.
A complete listing of these bodies can be found at www.iso.org/members.html.
© ISO 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
CONTENTS
Section Page
1 INTRODUCTION . 1-1
1.1 PURPOSE OF THIS RECOMMENDED STANDARD . 1-1
1.2 SCOPE . 1-1
1.3 APPLICABILITY . 1-2
1.4 RATIONALE . 1-2
1.5 DOCUMENT ORGANIZATION . 1-2
1.6 CROSS SUPPORT TRANSFER SERVICES DOCUMENTATION . 1-4
1.7 DEFINITIONS . 1-6
1.8 NOMENCLATURE . 1-7
1.9 CONVENTIONS . 1-8
1.10 REFERENCES . 1-12
2 OVERVIEW OF THE MONITORED DATA SERVICE . 2-1
2.1 SERVICE SUMMARY . 2-1
2.2 FUNCTIONAL DESCRIPTION . 2-2
2.3 SERVICE MANAGEMENT . 2-9
2.4 CROSS SUPPORT VIEW . 2-10
2.5 OPERATIONAL SCENARIO . 2-12
3 COMPOSITION OF THE MONITORED DATA CROSS
SUPPORT TRANSFER SERVICE . 3-1
3.1 OVERVIEW . 3-1
3.2 PROCEDURES OF THE MONITORED DATA CROSS
SUPPORT TRANSFER SERVICE . 3-1
3.3 MONITORED DATA CROSS SUPPORT TRANSFER
SERVICE STATE MACHINE . 3-3
4 ON-CHANGE-OPTION CYCLIC REPORT PROCEDURE . 4-1
4.1 DISCUSSION . 4-1
4.2 PROCEDURE TYPE IDENTIFIER . 4-2
4.3 EXTENSION . 4-2
4.4 BEHAVIOR . 4-2
4.5 REQUIRED OPERATIONS . 4-5
4.6 CONFIGURATION PARAMETERS . 4-6
4.7 PROCEDURE STATE TABLE . 4-6
CCSDS 922.1-B-1 Page vi April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
CONTENTS (continued)
Section Page
5 INFORMATION QUERY PROCEDURE . 5-1
5.1 DISCUSSION . 5-1
5.2 PROCEDURE TYPE IDENTIFIER . 5-1
5.3 REFINEMENT . 5-1
5.4 BEHAVIOR . 5-2
5.5 REQUIRED OPERATIONS . 5-3
5.6 CONFIGURATION PARAMETERS . 5-3
5.7 PROCEDURE STATE TABLE . 5-3
6 NOTIFICATION PROCEDURE . 6-1
6.1 DISCUSSION . 6-1
6.2 PROCEDURE TYPE IDENTIFIER . 6-1
6.3 REFINEMENT . 6-1
6.4 BEHAVIOR . 6-2
6.5 REQUIRED OPERATIONS . 6-3
6.6 CONFIGURATION PARAMETERS . 6-3
6.7 PROCEDURE STATE TABLE . 6-3
7 SETTING OF SERVICE MANAGEMENT AND CONFIGURATION
PARAMETERS INHERITED FROM FRAMEWORK OPERATIONS
AND PROCEDURES . 7-1
7.1 OVERVIEW . 7-1
7.2 responder-port-identifier SERVICE
MANAGEMENT PARAMETER . 7-1
7.3 ASSOCIATION CONTROL PROCEDURE CONFIGURATION
PARAMETERS . 7-1
7.4 ON-CHANGE-OPTION CYCLIC REPORT PROCEDURE
CONFIGURATION PARAMETERS . 7-2
7.5 NOTIFICATION PROCEDURE CONFIGURATION PARAMETERS . 7-2
7.6 INFORMATION QUERY PROCEDURE CONFIGURATION
PARAMETERS . 7-3
8 MONITORED DATA SERVICE-SPECIFIC VERSIONS OF
SERVICE-GENERIC PARAMETER AND EVENTS . 8-1
8.1 OVERVIEW . 8-1
8.2 mdSvcProductionStatus PARAMETER . 8-1
CCSDS 922.1-B-1 Page vii April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 5 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
CONTENTS (continued)
Section Page
8.3 mdSvcProductionStatusChange EVENT. 8-1
9 REFINEMENT OF DEFINITIONS OF FRAMEWORK PARAMETERS,
EVENTS, DIRECTIVES, AND DIAGNOSTIC VALUES USED BY THE
MONITORED DATA SERVICE . 9-1
9.1 OVERVIEW . 9-1
9.2 mdSvcProductionStatus PARAMETER
DEFINITION REFINEMENT . 9-1
9.3 mdSvcProductionStatusChange EVENT
DEFINITION REFINEMENT . 9-2
9.4 DIAGNOSTIC VALUE DEFINITION REFINEMENT . 9-2
ANNEX A IMPLEMENTATION CONFORMANCE STATEMENT
PROFORMA (NORMATIVE) . A-1
ANNEX B SERVICE OBJECT IDENTIFIERS MODULE (NORMATIVE) .B-1
ANNEX C PROCEDURE – ON-CHANGE-OPTION CYCLIC
REPORT PDUS (NORMATIVE) . C-1
ANNEX D MONITORED DATA PRODUCTION (NORMATIVE) . D-1
ANNEX E SECURITY, SANA, AND PATENT CONSIDERATIONS
(INFORMATIVE) .E-1
ANNEX F EXAMPLE FUNCTIONAL RESOURCE TYPE OBJECT
IDENTIFIER REGISTRY  (INFORMATIVE) . F-1
ANNEX G INFORMATIVE REFERENCES (INFORMATIVE) . G-1
ANNEX H ACRONYMS (INFORMATIVE) . H-1
ANNEX I CROSS REFERENCES TO CROSS SUPPORT TRANSFER
SERVICE SPECIFICATION FRAMEWORK (INFORMATIVE) . I-1
Figure
1-1 Cross Support Services Documentation . 1-4
2-1 Production and Provision of Monitored Data Services (Notional) . 2-3
2-2 Example of the Management and Provision of Monitored Data
Service Instances for a Service Package . 2-11
Table
3-1 Monitored Data Transfer Service Procedures . 3-3
4-1 On-Change-Option Cyclic Report Procedure Required Operations . 4-5
4-2 START Extension Parameter. 4-5
CCSDS 922.1-B-1 Page viii April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 6 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
CONTENTS (continued)
Tables Page
5-1 Information Query Procedure Required Operations . 5-3
6-1 Notification Procedure Required Operations . 6-3
A-1 Identification of PICS . A-3
A-2 Identification of Implementation under Test . A-4
A-3 Identification of Supplier . A-4
A-4 Identification of Specification . A-4
A-5 Required Procedures . A-5
A-6 Required PDUs . A-6
A-7 BIND Invocation Parameters . A-7
A-8 BIND Return Parameters . A-8
A-9 PEER-ABORT Invocation Parameters . A-9
A-10 UNBIND Invocation Parameters . A-9
A-11 UNBIND Return Parameters . A-10
A-12 GET Invocation Parameters . A-11
A-13 GET Return Parameters . A-12
A-14 START Invocation Parameters . A-13
A-15 START Return Parameters . A-15
A-16 STOP Invocation Parameters . A-16
A-17 STOP Return Parameters . A-17
A-18 NOTIFY Invocation Parameters . A-18
A-19 TRANSFER-DATA Invocation Parameters . A-19
F-1 Antenna Functional Resource Type Parameters . F-4
F-2 Forward 401 Space Link Carrier Transmission Functional Resource Type
Parameters . F-5
F-3 Forward CLTU TS Provider Functional Resource Type Parameters . F-7
F-4 Forward CLTU TS Provider Functional Resource Type Events . F-8
F-5 Return 401 Space Link Carrier Reception Functional Resource Type Parameters . F-9
F-6 Return TM Synchronization and Channel Decoding Functional Resource Type
Events . F-11
F-7 Return All Frames TS Provider Functional Resource Type Parameters . F-12
F-8 Return All Frames TS Provider Functional Resource Type Events . F-13
F-9 MD-CSTS Provider Functional Resource Type Parameters . F-13
F-10 MD-CSTS Provider Functional Resource Type Events . F-14
I-1 Cross Reference to Reference-[1] Sections and Paragraphs . I-1
CCSDS 922.1-B-1 Page ix April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
1 INTRODUCTION
1.1 PURPOSE OF THIS RECOMMENDED STANDARD
This Recommended Standard defines the Monitored Data Cross Support Transfer Service
(CSTS), in conformance with the Cross Support Transfer Services Specification Framework
Recommended Standard (reference [1]). The Monitored Data CSTS (MD-CSTS) is a service
that allows a spaceflight mission to receive cyclic reports on, and to query the current values
of, the parameters that are pertinent to Cross Support Services being provided by a Cross
Support Complex. The Monitored Data service also allows a spaceflight mission to receive
notifications of the occurrence of events of interest associated with the services that are being
provided by a Cross Support Complex.
NOTE – The term ‘Cross Support Complex’, as used throughout this document,
corresponds to the Earth Space Link Terminal (ESLT) defined in the Space
Communications Cross Support Architecture Description Document
(reference [G9]).
1.2 SCOPE
This Recommended Standard defines the Monitored Data service in terms of:
a) the CSTS procedures that constitute the service;
b) the extensions and refinements of the behavior of those CSTS procedures necessary
to provide the transfer service;
c) the extensions and refinements of standard CSTS operations associated with each of
the procedures;
d) the relationships among the procedures that constitute the service.
It does not specify:
a) individual implementations or products;
b) the implementation of entities or interfaces within real systems;
c) the methods or technologies required to measure the values of monitored parameters
and to detect the occurrence of events of interest;
d) the methods or technologies required for communication;
e) the management activities necessary to schedule, configure, and control the MD-
CSTS;
f) the specific parameters that are to be reported and events that are to be notified by the
MD-CSTS.
CCSDS 922.1-B-1 Page 1-1 April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 8 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
1.3 APPLICABILITY
1.3.1 GENERAL
The applicability and limits of applicability of Cross Support Transfer Services in general, as
described in reference [1], pertain to the Monitored Data service, with the addition of the
conditions described in 1.3.2, below.
1.3.2 APPLICABILITY OF THIS RECOMMENDED STANDARD
This Recommended Standard is applicable to the implementation of real systems that
monitor provision and production of space communication Cross Support Services for the
purposes of generating cyclic status reports, generating notifications of changes in status in
real time, and responding to queries of current values of operational parameters.
1.4 RATIONALE
The goal of this Recommended Standard is to create a standard for interoperability for the
exchange of cross support service-related status information between the cross support
elements of various space Agencies and the users of the Cross Support Services that they
provide.
1.5 DOCUMENT ORGANIZATION
Section 2 describes the Monitored Data Cross Support Transfer Service in terms of:
– the role of Service Management with respect to the MD-CSTS;
– the allocation of production and provision of the MD-CSTS to Functional Resources;
– the cross support view of the MD-CSTS;
– the functional description of the production and provision of the service; and
– an operational scenario that illustrates some of the more significant aspects of the
service.
Section 3 specifies the composition of the MD-CSTS. The service type identifier is declared,
the procedures that constitute the service are identified, and the CSTS state machine that
applies to the MD-CSTS is specified. Because the MD-CSTS is composed of procedures that
are directly adopted from the CSTS Framework without extension, no further specification of
the MD-CSTS is required.
Section 4 specifies the On-Change-Option Cyclic Report procedure, which is an extension
and refinement of the Framework Cyclic Report Procedure.
Section 5 specifies the refinements of the Information Query procedure.
CCSDS 922.1-B-1 Page 1-2 April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 9 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
Section 6 specifies the refinements of the Notification procedure.
Section 7 specifies how the procedure configuration parameters are to be set for the MD-
CSTS.
Section 8 specifies the Monitored Data Service-specific versions of the service-generic
parameter and events that are defined in Cross Support Transfer Service—Specification
Framework (reference [1]).
Section 9 specifies the refinements of the definitions of Framework parameters, events, and
directives for the purposes of making them applicable to the MD-CSTS.
Annex A is the Implementation Conformance Statement Proforma for the MD-CSTS.
Annex B provides the formal specification of the ASN.1 Object Identifiers module for the
Monitored Data transfer service.
Annex C provides the formal specification of the ASN.1 Protocol Data Unit module for the
On-Change-Option Cyclic Report procedure of the Monitored Data transfer service.
Annex D defines the monitored data production process. In particular, it specifies how
monitored data values are to be labeled so that, when transferred by MD-CSTS instances, the
sources of the measurements are unambiguous.
Annex E addresses the security, Space Assigned Numbers Authority (SANA), and patent
considerations associated with the MD-CSTS.
Annex F describes an example set of monitored parameters, notifiable events, and their
associated Functional Resource Types. These examples are modeled on the contents of the
SANA Functional Resource Registry (reference [3]).
NOTE – The SANA Functional Resource Registry is the normative repository of all such
definitions. The example entries in annex F are included to illustrate the concepts
of the use of Functional Resources by the MD service. Any real implementation
of the MD service must use the Functional Resource specifications found in the
SANA Functional Resource Registry.
Annex G provides the list of informative references.
Annex H lists the acronyms used in this document.
Annex I identifies the specific reference-[1] sections that are cross referenced by the MD-
CSTS Recommended Standard, and the sections of the MD-CSTS Recommended Standard
that reference each of those sections or subsections in reference [1]. This annex is included
for maintainability of this Recommended Standard through future changes in reference [1].
CCSDS 922.1-B-1 Page 1-3 April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 10 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
1.6 CROSS SUPPORT TRANSFER SERVICES DOCUMENTATION
The basic organization of the Cross Support Services documentation and the relationship to
the CSTS documentation is shown in figure 1-1.
Cross Support Services
Space
Cross Support
Cross Support Concept Communication Cross
Reference Model
Part 1: SLE Services Support Service
Part 1: SLE Services
Management
Cross Support Transfer Services
Cross Support Transfer
Service Specification
Cross Support Transfer
Framework Concept
Service Specification Suite
Cross Support Transfer
Service Specification
SLE Transfer Services
Framework
SLE Transfer Service
Guidelines for Specification
Specification Suite
of Cross Support Transfer
Services
SLE Internet Protocol for
Transfer Services
Key:
Recommended Practice (Magenta)
Recommended Standard (Blue)
Report (Green)
Figure 1-1: Cross Support Services Documentation
The CSTS Documentation is:
a) Cross Support Concept—Part 1: Space Link Extension Services (reference [G1]): a
Report introducing the concepts of cross support and the Space Link Extension (SLE)
services. Many of the concepts for the SLE transfer services have been adopted for
the CSTSes (see h) below);
b) Cross Support Reference Model—Part 1: Space Link Extension Services
(reference [2]): a Recommended Standard that defines the framework and
CCSDS 922.1-B-1 Page 1-4 April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 11 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
terminology for the specification of SLE services. Much of the framework and
terminology of this reference model has been adopted or adapted for CSTSes (see
1.7.2 and 2.2).
c) Space Communication Cross Support Service Management suite (informative
references [G6], [G7], and [G8]): Recommended Standards that specify the Service
Management Information Entities that are used to configure and schedule CSTSes;
d) The SLE Transfer Services suite: The SLE Transfer Services comprise a set of Cross
Support Transfer Services that are used to transfer specific telecommand and
telemetry protocol data units. The SLE Transfer Services are closely related to the
CSTS suite in that they collectively define the set of operations that are the basis for
the CSTS Specification Framework. However, because of history (the SLE Transfer
Services were already specified and implemented prior to development of the CSTS
Framework) the SLE Transfer Services are separated from CSTSes;
e) Space Link Extension - Internet Protocol for Transfer Services (reference [G2]): a
Recommended Standard that defines a protocol for transfer of Protocol Data Units
(PDUs) defined in the Cross Support Transfer Services. This Recommended Standard
was originally developed to support SLE transfer services (hence the title), but it is
also applicable to (and specified for) use by Cross Support Transfer Services.
The documents specific to Cross Support Transfer Services are:
f) Cross Support Transfer Services Specification Framework (reference [1]): a
Recommended Standard that defines basic building blocks for the specification of
Cross Support Transfer Service procedures;
g) Guideline for Specification of Cross-Support Transfer Services: a Recommended
Practice that, when published, will define the guidelines for construction of a Cross
Support Transfer Service based on the CSTS Specification Framework;
NOTE – As of the publication of this Recommended Standard, the Guidelines
Magenta Book is in-progress. It is not required to understand this
Recommended Standard.
h) Cross Support Transfer Services Specification Framework Concepts (reference [G3]):
A Report that provides tutorial material on the objectives and concepts of the CSTS
Specification Framework;
i) Cross Support Transfer Services Suite: The set of specifications for actual CSTSes
built from the procedures in the CSTS Specification Framework and in accordance
with the CSTS Guidelines.
CCSDS 922.1-B-1 Page 1-5 April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 12 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
1.7 DEFINITIONS
1.7.1 TERMS DEFINED IN THE CROSS SUPPORT TRANSFER SERVICES
SPECIFICATION FRAMEWORK RECOMMENDED STANDARD
(REFERENCE [1])
a) Association Control procedure;
b) Buffered Data Delivery procedure;
c) complete data delivery mode;
d) Cross Support Complex;
e) Cross Support Service production;
f) Cross Support Transfer Service;
g) Event Identifier;
h) Event Label;
i) Event Name;
j) Functional Resource instance;
k) Functional Resource Instance Number;
l) Functional Resource Name;
m) Functional Resource Type;
n) Label List;
o) Label List Set;
p) non-blocking (operation);
q) Parameter Identifier;
r) Parameter Label;
s) Parameter Name;
t) prime procedure instance;
u) procedure configuration parameter;
v) procedure type;
w) procedure instance identifier;
x) Published Identifier;
y) qualified parameter;
CCSDS 922.1-B-1 Page 1-6 April 2017
© ISO 2020 – All rights reserved

---------------------- Page: 13 ----------------------
ISO 23104:2020(E)
CROSS SUPPORT TRANSFER SERVICES—MONITORED DATA SERVICE
z) secondary procedure instance;
aa) service management parameter;
bb) service-user-responding-timer;
cc) subscription.
1.7.2 TERMS DEFINED IN THE CROSS SUPPORT REFERENCE MODEL
(REFERENCE [2])
a) Complex Management (CM) (called SLE Complex Management in reference [2]);
b) Mission User Entity (MUE);
c) service agreem
...