Ships and marine technology — Heading control systems — Technical Corrigendum 1

Navires et technologie maritime — Systèmes de pilotage — Rectificatif technique 1

General Information

Status

Withdrawn

Publication Date

07-Nov-2001

Withdrawal Date

07-Nov-2001

ICS

47.020.70 - Navigation and control equipment

Technical Committee

ISO/TC 8/SC 6 - Navigation and ship operations

Drafting Committee

ISO/TC 8/SC 6 - Navigation and ship operations

Current Stage

9599 - Withdrawal of International Standard

Completion Date

29-Aug-2006

Ref Project

Relations

Revised

ISO 11674:2006 - Ships and marine technology — Heading control systems

Effective Date

15-Apr-2008

Corrects

ISO 11674:2000 - Ships and marine technology — Heading control systems

Effective Date

06-Jun-2022

Child

ISO 11674:2000 - Ships and marine technology — Heading control systems

Effective Date

15-Apr-2008

Buy Standard

Standard

ISO 11674:2000/Cor 1:2001

English language

2 pages

sale 15% off

Preview

sale 15% off

Preview

Standards Content (Sample)

ISO 11674:2000/Cor 1:2001

INTERNATIONAL STANDARD ISO 11674:2000
TECHNICAL CORRIGENDUM 1
Published 2001-11-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION

Ships and marine technology — Heading control systems
TECHNICAL CORRIGENDUM 1
Navires et technologie maritime — Systèmes de pilotage
RECTIFICATIF TECHNIQUE 1
Technical Corrigendum 1 to International Standard ISO 11674:2000 was prepared by Technical Committee
ISO/TC 8, Ships and marine technology, Subcommittee SC 6, Navigation.

Page 7
4.3.15.3
Replace with the following text.
4.3.15.3 If a heading control system is capable of digital serial communication with the ship's navigation system,
the interface facilities shall comply with the relevant international marin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO

ISO 22554:2023(Main)

Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type

This document specifies the construction, performance requirements, methods of testing, and required test results for electric and electronic propeller shaft revolution indicators (hereinafter referred to as “indicator system”). The requirements in this document are based on those contained in the International Convention for the Safety of Life at Sea (SOLAS) 1974 (as amended, 2000), Clause 2.5.4, Regulation 19, chapter V. This document is intended to be used in conjunction with IMO Resolution A.694 (17) and IEC 60945. NOTE A propeller shaft revolution indicator can be designed so that it also complies with the requirements for a tachometer for the engine of a ship.

Standard
10 pages
English language
sale 15% off

ISO

ISO 9875:2023(Main)

Ships and marine technology — Marine echo-sounding equipment

This document specifies the minimum operational and performance requirements, methods of testing and test results of marine echo-sounding equipment required to comply with the performance standards adopted by the IMO Resolution A.224(VII) as amended by IMO Resolution MSC.74(69), Annex 4. This document is intended to be used in conjunction with IMO Resolution A.694(17) and with IEC 60945. For bridge alert management, IMO Resolution MSC.302(87) supersedes IMO Resolution MSC.74(69), Annex 4. Accordingly, this document incorporates references to IEC 62923-1 and IEC 62923-2 which are associated with Resolution MSC.302(87) for requirements and tests where applicable. In accordance with IMO Resolution MSC.74(69), Annex 4, Articles 1 and 2, the purpose of echo-sounding equipment is to provide reliable information on the depth of water under a ship to aid navigation in particular in shallow water. This document is applicable for ship speeds from 0 kn to 30 kn.

Standard
28 pages
English language
sale 15% off
Draft
27 pages
English language
sale 15% off
Draft
27 pages
English language
sale 15% off

ISO

ISO 11606:2022(Main)

Ships and marine technology — Marine electromagnetic compasses

This document specifies general requirements, type tests and individual tests for the marine electromagnetic compasses, intended for steering purposes and/or taking bearings on board ships, required by Chapter V of SOLAS, 1974 and the International Code of Safety for High-Speed Craft (HSC Code). In accordance with IMO Resolution MSC.166(78), this document is applicable to marine electromagnetic compasses fitted before 1 July 2002. For marine electromagnetic compasses installed on or after 1 July 2002, ISO 22090-2 is applicable. The magnetic compasses specified in this document apply to ships the overall length of which is normally not less than 24 m. NOTE In this document requirements extracted from the recommendations of IMO resolutions are printed in italics.

Standard
14 pages
English language
sale 15% off

ISO

ISO 20673:2022(Main)

Ships and marine technology — Electric rudder angle indicators

This document specifies the construction, performance requirements, methods of testing and required test results for electric rudder angle indicators required to comply with Clause 2.5.4, Regulation 19, chapter V, SOLAS 1974 (as amended, 2000). This document is associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document is different from IEC 60945, the requirement in this document takes precedence.

Standard
5 pages
English language
sale 15% off

ISO

ISO 20672:2022(Main)

Ships and marine technology — Rate of turn indicators

This document specifies the construction, performance requirements, methods of testing and required test results for the rate of turn indicators required by Clause 2.9.1, Regulation 19, chapter V, SOLAS 1974 (as amended, 2000). It is based upon the requirements of IMO Resolution A.526(13), and is also associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document is different from that in IEC 60945, the requirement in this document takes precedence. NOTE All requirements that are extracted from the recommendations of IMO Resolution A.526(13) on performance standards for rate of turn indicators are printed in italics and the resolution and paragraph numbers are indicated in brackets.

Standard
6 pages
English language
sale 15% off

ISO

ISO 22555:2022(Main)

Ships and marine technology — Propeller pitch indicators

This document specifies the construction, performance requirements, methods of testing and required test results for the propeller pitch indicators (hereinafter referred to as “indicator system”) required by Clause 2.5.4, Regulation 19, chapter V, SOLAS 1974 (as amended, 2000). This document is associated with IMO Resolution A.694 (17) and IEC 60945. Where a requirement in this document differs from IEC 60945, the requirement in this document takes precedence.

Standard
6 pages
English language
sale 15% off

ISO

ISO 16273:2020(Main)

Ships and marine technology — Night vision equipment for high-speed craft — Operational and performance requirements, methods of testing and required test results

This document specifies operational and performance requirements and methods of testing for night vision equipment fitted to high-speed craft. NOTE In this document, the text identical to IMO Resolution MSC.94 (72) is printed in italics; references to the paragraphs concerned in the IMO Resolution are given in brackets.

Standard
30 pages
English language
sale 15% off
Draft
30 pages
English language
sale 15% off

ISO

ISO 11674:2019(Main)

Ships and marine technology — Heading control systems

This document specifies the minimum operational, functional and performance requirements, as well as methods of testing and the corresponding required test results, for heading control systems installed on board ships conforming to performance standards adopted by IMO Resolution MSC.64(67), Annex 3. In addition, it takes into account parts of IMO resolution A.694(17) to which IEC 60945 is associated. Also it takes into account IMO resolution MSC.302(87) on bridge alert management (BAM). In this document, the ship models of simulators used for performance testing are based on those from ships with a combined system of propeller propulsion and conventional rudder, with a speed range of up to 30 knots. The test results are considered also to be valid for ships with multiple parallel operated rudders. NOTE The text in this document that is identical to that in IMO Resolution A.342(IX), as amended by IMO Resolution MSC.64(67) Annex 3, and IMO Resolution A.694(17), is printed in italics.

Standard
47 pages
English language
sale 15% off

ISO

ISO 21792:2019(Main)

Ships and marine technology — Navigation and ship operations — Guidelines for onboard telephone equipment

This document provides general and specific recommendations related to the quality of communication, connectivity, installation, performance and maintenance of onboard telephone equipment, including automatic telephones, common battery telephones, battery-less telephones and sound-powered telephones. It also specifies requirements for the related performance tests (shop tests and onsite tests) and for the maintenance tests. It is not applicable to digital telephones, LAN (VoIP) telephones, and wireless telephones. NOTE These telephones are excluded because they were under development during the elaboration of this document so that their specifications remained to be determined.

Standard
18 pages
English language
sale 15% off

ISO

ISO 25862:2019(Main)

Ships and marine technology — Marine magnetic compasses, binnacles and azimuth reading devices

This document specifies requirements for the construction and performance of marine magnetic compasses for navigation and steering purposes, binnacles and azimuth reading devices. Two types of binnacle are specified; the appropriate type for a given vessel is determined by the design of the ship (see Clause 5). This document applies to liquid-filled magnetic compasses: — intended for use in ship's navigation and steering in sea navigation; — having a direct reading system; and — which can be of the reflecting, projecting or transmitting types. In the context of this document, a magnetic compass is an instrument consisting of a directional system supported by a single pivot inside a bowl that is completely filled with liquid and supported by gimbals inside or outside the bowl. However, this document also addresses compasses without gimbals; the requirements relating to gimbals do not apply to such compasses. This document applies to magnetic compasses carried on board: a) all ships required to carry a standard compass as per SOLAS Chapter V, the Class A magnetic compass; b) lifeboats and rescue boats as per the IMO Lifesaving Appliances (LSA) Code, fitted with the Class B magnetic compass; and c) all ships to which a) and b) above do not apply, but which are fitted with a Class A or B magnetic compass. This document does not apply to: a) dry card compasses; b) types of compass designed on principles different from those stated above or not complying with the descriptions given; or c) hand bearing compasses. The requirements for the testing and certification of marine magnetic compasses, azimuth reading devices and binnacles are given in Annexes A, B, C, and D. The requirements for the positioning in ships, the determination of safe distances and the deviation adjustment of compasses are given in Annexes E, F and G, respectively. The special requirements of the magnetic compass for lifeboats/rescue boats are given in Annex H.

Standard
49 pages
English language
sale 15% off