Primary batteries - Part 2: Physical and electrical specifications

This part of IEC 60086 is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions, and the discharge test conditions and discharge performance requirements. The major technical changes are the addition of a "digital still camera test" for the LR6 battery, the reduction, for selected no letter batteries, from three grades (S, C and P) to two grades (S and P) with appropriate adjustments to MAD values, the deletion of the 3,6 ohm pulse test for the R03 battery, and the addition of new constant current hearing aid tests (standard and high drain) for the PR41, PR44, PR48 and PR70 batteries.

Piles électriques - Partie 2: Spécifications physiques et électriques

La présente partie de la CEI 60086 est applicable aux piles électriques fonctionnant avec des systèmes électrochimiques normalisés. Elle spécifie les dimensions physiques, et les conditions d'essai de décharge et les spécifications de performance de décharge. Les principales modifications techniques sont l'addition d'une "essai d'appareil photo numérique" pour les piles LR6, la réduction, pour les piles particulières du système sans lettre, de trois catégories (S, C et P) à deux catégories (S et P) avec les réglages appropriés des valeurs de MAD, la suppression de l'essai d'impulsion 3,6 ohm pour les piles R03, et l'ajout d'essais nouveaux à courant constant pour les prothèses auditives (décharge normale et élevée) pour les piles PR41, PR44, PR48 et PR70.

General Information

Status
Published
Publication Date
07-Dec-2006
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
17-Feb-2011
Ref Project

Relations

Buy Standard

Standard
IEC 60086-2:2006 - Primary batteries - Part 2: Physical and electrical specifications Released:12/8/2006 Isbn:2831889316
English language
57 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 60086-2:2006 - Primary batteries - Part 2: Physical and electrical specifications Released:12/8/2006 Isbn:2831890837
English and French language
116 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL IEC
STANDARD 60086-2
Eleventh edition
2006-12
Primary batteries –
Part 2:
Physical and electrical specifications

Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD 60086-2
Eleventh edition
2006-12
Primary batteries –
Part 2:
Physical and electrical specifications

© IEC 2006 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale XA
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60086-2 © IEC:2006(E)
CONTENTS
FOREWORD.4

INTRODUCTION.6

1 Scope.7

2 Normative references .7

3 Terms and definitions .7

4 Symbols and abbreviations.9

5 Battery dimensions, symbols .9
6 Constitution of the battery specification tables.9
7 Physical and electrical specifications.12
7.1 Category 1 batteries .12
7.1.1 Category 1 – Physical and electrical specifications .12
7.1.2 Category 1 – Specifications: R1, R03, R6P, R6S .13
7.1.3 Category 1 – Specifications: R14P, R14S .14
7.1.4 Category 1 – Specifications: R20P, R20S, 2R10, LR8D425, LR1 .15
7.1.5 Category 1 – Specifications: LR03, LR6, LR14, LR20 .17
7.1.6 Category 1 – Specifications: CR12A604 .19
7.2 Category 2 batteries .20
7.2.1 Category 2 – Physical and electrical specifications .20
7.2.2 Category 2 – Specifications: CR14250, CR15H270, CR17345,
CR17450, BR17335.21
7.3 Category 3 batteries .22
7.3.1 Category 3 – Physical and electrical specifications .22
7.3.2 Category 3 – Specifications: LR9, LR53, CR11108 .23
7.4 Category 4 batteries .24
7.4.1 Category 4 – Physical and electrical specifications .24
7.4.2 Category 4 – Specifications: PR70, PR41, PR48, PR44.25
7.4.3 Category 4 – Specifications: LR41, LR55, LR54, LR43, LR44 .28
7.4.4 Category 4 – Specifications: SR62, SR63, SR 65, SR64, SR60, SR67,
SR66, SR58, SR68, SR59, SR69, SR41, SR57, SR55, SR48 .29
7.4.5 Category 4 – Specifications: SR56, SR54, SR42, SR43, SR44 .30
7.4.6 Category 4 – Specifications: CR1025, CR1216, CR1220, CR1616,

CR2012, CR1620, CR2016, CR2025, CR2320, CR2032, CR2330,
CR2430, CR2354, CR3032, CR2450 .31
7.4.7 Category 4 – Specifications: BR1225, BR2016, BR2020, BR2320,
BR2325, BR3032.32
7.5 Category 5 batteries .33
7.5.1 Category 5 – Physical and electrical specifications .33
7.6 Category 6 batteries .36
7.6.1 Category 6 – Physical and electrical specifications .36

Annex A (informative) Tabulation of batteries by application .49
Annex B (informative) Cross-reference index .53
Annex C (informative) Index.56

Bibliography.57

60086-2 © IEC:2006(E) – 3 –
Figure 1 – Category 1 dimensional drawings.12

Figure 2 – Category 2 dimensional drawing .20

Figure 3 – Category 3 dimensional drawings.22

Figure 4 – Category 4 dimensional drawing .24

Figure 5 – Gauge for Category 4 batteries .27

Figure 6 – Dimensional drawing: R40.33

Figure 7 – Dimensional drawing: 4LR44, 2CR13252, 4SR44 .34

Figure 8 – Dimensional drawing: 5AR40 .35

Figure 9 – Dimensional drawing: S4.36
Figure 10 – Dimensional drawing: 3R12C,3R12P, 3R12S, 3LR12 .37
Figure 11 – Dimensional drawing: 4LR61.38
Figure 12 – Dimensional drawing: CR-P2, BR-P2.39
Figure 13 – Dimensional drawing: 2CR5 .40
Figure 14 – Dimensional drawing: 2EP3863.41
Figure 15 – Dimensional drawing: 4R25X, 4LR25X .42
Figure 16 – Dimensional drawing: 4R25Y .43
Figure 17 – Dimensional drawing: 4R25-2, 4LR25-2 .44
Figure 18 – Dimensional drawing: 6AS4.45
Figure 19 – Dimensional drawing: 6AS6.46
Figure 20 – Dimensional drawing: 6F22, 6LR61 .47
Figure 21 – Dimensional drawing: 6F100 .48

Table A.1 – Road warning lamp .49
Table A.2 – Industrial equipment.49
Table A.3 – Electrical fence controller.49
Table A.4 – Radio .50
Table A.5 – Electronic equipment .50
Table A.6 – Paging test.50
Table A.7 – Hearing aid .50
Table A.8 – Photo .51

Table A.9 – Portable lighting.51
Table A.10 – Smoke detector.51
Table A.11 – Toy (motor) .52
Table A.12 – Accelerated application test for automatic camera.52
Table A.13 – Tape recorder (personal cassette player) .52
Table B.1 – Category 1 batteries.53
Table B.2 – Category 2 batteries.53
Table B.3 – Category 3 batteries.53
Table B.4 – Category 4 batteries.54
Table B.5 – Category 5 batteries.55
Table B.6 – Category 6 batteries.55
Table C.1 – Index .56

– 4 – 60086-2 © IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
PRIMARY BATTERIES –
Part 2: Physical and electrical specifications

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or reg
...


IEC 60086-2
Edition 11.0 2006-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Primary batteries –
Part 2: Physical and electrical specifications

Piles électriques –
Partie 2: Spécifications physiques et électriques

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60086-2
Edition 11.0 2006-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Primary batteries –
Part 2: Physical and electrical specifications

Piles électriques –
Partie 2: Spécifications physiques et électriques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XA
CODE PRIX
ICS 29.220.10 ISBN 2-8318-9083-7
– 2 – 60086-2 © IEC:2006
CONTENTS
FOREWORD.4
INTRODUCTION.6

1 Scope.7
2 Normative references .7
3 Terms and definitions .7
4 Symbols and abbreviations.9
5 Battery dimensions, symbols .9
6 Constitution of the battery specification tables.9
7 Physical and electrical specifications.12
7.1 Category 1 batteries .12
7.1.1 Category 1 – Physical and electrical specifications .12
7.1.2 Category 1 – Specifications: R1, R03, R6P, R6S .13
7.1.3 Category 1 – Specifications: R14P, R14S .14
7.1.4 Category 1 – Specifications: R20P, R20S, 2R10, LR8D425, LR1 .15
7.1.5 Category 1 – Specifications: LR03, LR6, LR14, LR20 .17
7.1.6 Category 1 – Specifications: CR12A604 .19
7.2 Category 2 batteries .20
7.2.1 Category 2 – Physical and electrical specifications .20
7.2.2 Category 2 – Specifications: CR14250, CR15H270, CR17345,
CR17450, BR17335.21
7.3 Category 3 batteries .22
7.3.1 Category 3 – Physical and electrical specifications .22
7.3.2 Category 3 – Specifications: LR9, LR53, CR11108 .23
7.4 Category 4 batteries .24
7.4.1 Category 4 – Physical and electrical specifications .24
7.4.2 Category 4 – Specifications: PR70, PR41, PR48, PR44.25
7.4.3 Category 4 – Specifications: LR41, LR55, LR54, LR43, LR44 .29
7.4.4 Category 4 – Specifications: SR62, SR63, SR 65, SR64, SR60, SR67,
SR66, SR58, SR68, SR59, SR69, SR41, SR57, SR55, SR48 .30
7.4.5 Category 4 – Specifications: SR56, SR54, SR42, SR43, SR44 .31
7.4.6 Category 4 – Specifications: CR1025, CR1216, CR1220, CR1616,
CR2012, CR1620, CR2016, CR2025, CR2320, CR2032, CR2330,
CR2430, CR2354, CR3032, CR2450 .32
7.4.7 Category 4 – Specifications: BR1225, BR2016, BR2020, BR2320,
BR2325, BR3032.33
7.5 Category 5 batteries .34
7.5.1 Category 5 – Physical and electrical specifications .34
7.6 Category 6 batteries .37
7.6.1 Category 6 – Physical and electrical specifications .37

Annex A (informative) Tabulation of batteries by application .50
Annex B (informative) Cross-reference index .54
Annex C (informative) Index.57

Bibliography.58

60086-2 © IEC:2006 – 3 –
Figure 1 – Category 1 dimensional drawings.12
Figure 2 – Category 2 dimensional drawing .20
Figure 3 – Category 3 dimensional drawings.22
Figure 4 – Category 4 dimensional drawing .24
Figure 5 – Gauge for Category 4 batteries .28
Figure 6 – Dimensional drawing: R40.34
Figure 7 – Dimensional drawing: 4LR44, 2CR13252, 4SR44 .35
Figure 8 – Dimensional drawing: 5AR40 .36
Figure 9 – Dimensional drawing: S4.37
Figure 10 – Dimensional drawing: 3R12C,3R12P, 3R12S, 3LR12 .38
Figure 11 – Dimensional drawing: 4LR61.39
Figure 12 – Dimensional drawing: CR-P2, BR-P2.40
Figure 13 – Dimensional drawing: 2CR5 .41
Figure 14 – Dimensional drawing: 2EP3863.42
Figure 15 – Dimensional drawing: 4R25X, 4LR25X .43
Figure 16 – Dimensional drawing: 4R25Y .44
Figure 17 – Dimensional drawing: 4R25-2, 4LR25-2 .45
Figure 18 – Dimensional drawing: 6AS4.46
Figure 19 – Dimensional drawing: 6AS6.47
Figure 20 – Dimensional drawing: 6F22, 6LR61 .48
Figure 21 – Dimensional drawing: 6F100 .49

Table A.1 – Road warning lamp .50
Table A.2 – Industrial equipment.50
Table A.3 – Electrical fence controller.50
Table A.4 – Radio .51
Table A.5 – Electronic equipment .51
Table A.6 – Paging test.51
Table A.7 – Hearing aid .51
Table A.8 – Photo .52
Table A.9 – Portable lighting.52
Table A.10 – Smoke detector.52
Table A.11 – Toy (motor) .53
Table A.12 – Accelerated application test for automatic camera.53
Table A.13 – Tape recorder (personal cassette player) .53
Table B.1 – Category 1 batteries.54
Table B.2 – Category 2 batteries.54
Table B.3 – Category 3 batteries.54
Table B.4 – Category 4 batteries.55
Table B.5 – Category 5 batteries.56
Table B.6 – Category 6 batteries.56
Table C.1 – Index .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.