IEC 60622:1988
(Main)Sealed nickel-cadmium prismatic rechargeable single cells
Sealed nickel-cadmium prismatic rechargeable single cells
Specifies tests and requirements for sealed nickel-cadmium prismatic rechargeable single cells.
Eléments parallélépipédiques rechargeables étanches au nickel-cadmium
Spécifie les essais et les prescriptions applicables aux éléments individuels parallélépipédiques rechargeables étanches au nickel-cadmium.
General Information
Relations
Standards Content (Sample)
IEC Publication 622
Publication 622 de la CEI
(Amendment 2 - 1992)
(Amendement 2 - 1992)
Sealed nickel-cadmium prismatic
Eléments individuels parallélépipédiques
rechargeable single cells
rechargeables étanches
au nickel-cadmium
C O R R I G E N
...
This May Also Interest You
IEC 63338:2024 applies to the reuse and repurposing of secondary lithium ion and nickel-metal hydride cells and batteries after extraction from the application for which they were first placed on the market (hereafter "relevant cells and batteries").
This document does not permit reuse or repurposing of single cells or cell assemblies if battery lifetime traceability data are not recorded. See Clause 4. Swappable batteries such as those used in e-scooters are removed and installed by the user (such as for charging) without conducting a safety assessment (such as battery lifetime traceability data assessment) as part of intended use, which is not considered reuse or repurposing. This document does not cover system component reuse and repurposing. The original manufacturer can be contacted to confirm suitability of components for reuse and repurposing.
The primary purpose of this document is to provide basic guidance on the environmental aspects of reuse and repurposing of relevant cells and batteries; basic guidance on safety risks for the reuse and repurposing of relevant cells and batteries; basic guidance on original manufacturer warning notice on the applicability of a product for reuse or repurposing; and useful information regarding reuse and repurposing and relevant cell and battery regulations and standards to interested parties.
- Standard60 pagesEnglish and French languagesale 15% off
IEC 61960-4:2024 specifies performance tests, designations, markings, dimensions and other requirements for coin secondary lithium cells and batteries for portable applications, watches, and backup power supply such as memory backup applications. In particular, watch‑specific requirements are specified in Annex A. This document provides purchasers and users of coin secondary lithium cells and batteries with a set of criteria with which they can assess the performance of coin secondary lithium cells and batteries offered by various manufacturers. This document defines a minimum required level of performance and a standardized methodology by which testing is performed and the results of this testing are reported to the user. This document covers coin secondary lithium cells and batteries with a range of chemistries. Each electrochemical couple has a characteristic voltage range over which, during discharge, it releases its electrical capacity, a characteristic nominal voltage and a characteristic end‑of‑discharge voltage. Users of coin secondary lithium cells and batteries are requested to consult the manufacturer for advice. This document also provides guidelines for designers of equipment using lithium batteries (voir l'Annexe B).
- Standard65 pagesEnglish languagesale 15% off
- Standard43 pagesEnglish and French languagesale 15% off
IEC 61960-4:2020 specifies performance tests, designations, markings, dimensions and other requirements for coin secondary lithium cells and batteries for portable applications and backup power supply such as memory backup applications.
The objective of this document is to provide the purchasers and users of coin secondary lithium cells and batteries with a set of criteria with which they can assess the performance of coin secondary lithium cells and batteries offered by various manufacturers.
This document defines a minimum required level of performance and a standardized methodology by which testing is performed and the results of this testing reported to the user. Hence, users will be able to establish the viability of commercially available cells and batteries via the declared specification and thus be able to select the cell or battery best suited for their intended application.
This document covers coin secondary lithium cells and batteries with a range of chemistries. Each electrochemical couple has a characteristic voltage range over which, during discharge, it releases its electrical capacity, a characteristic nominal voltage and a characteristic end-of-discharge voltage. Users of coin secondary lithium cells and batteries are requested to consult the manufacturer for advice.
This document also provides guidelines for designers of equipment using lithium batteries.
- Standard32 pagesEnglish and French languagesale 15% off
IEC 61960-3:2017 specifies performance tests, designations, markings, dimensions and other requirements for secondary lithium single cells and batteries for portable applications.
The objective of this document is to provide the purchasers and users of secondary lithium cells and batteries with a set of criteria with which they can judge the performance of secondary lithium cells and batteries offered by various manufacturers.
Portable applications comprise hand-held equipment, transportable equipment and movable equipment.
This first edition cancels and replaces the second edition of IEC 61960 published in 2011. It is a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- adding definition of portable applications (Scope),
- update of examples of cells (Table 1 and 2),
- adding “Dimensions of the cell with a laminate film case” (Annex A),
- adding “Capacity after storage” (from the date of manufacture) (Annex B).
- Standard46 pagesEnglish and French languagesale 15% off
IEC 60623:2017 specifies marking, designation, dimensions, tests and requirements for vented nickel-cadmium prismatic secondary single cells. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this document, the former takes precedence.
This edition includes the following significant technical changes with respect to the previous edition:
- optional characterization of cells designed for performances at very low and/or very high temperature;
- optional characterization of cells tested with CCCV charge;
- optional characterization of cells designed for rapid charge;
- optional characterization of cells designed for high cycling.
- Standard73 pagesEnglish languagesale 15% off
- Standard48 pagesEnglish and French languagesale 15% off
IEC 62675:2014 specifies marking, designation, dimensions, tests and requirements for sealed nickel-metal hydride prismatic secondary single cells.
- Standard33 pagesEnglish and French languagesale 15% off
This International standard specifies tests and requirements for verifying the mechanical behaviour of sealed portable secondary cells and batteries during handling and normal use
- Standard17 pagesEnglish and French languagesale 15% off
This International Standard specifies performance tests, designations, markings, dimensions and other requirements for secondary lithium single cells and batteries for portable applications. The objective of this standard is to provide the purchasers and users of secondary lithium cells and batteries with a set of criteria with which they can judge the performance of secondary lithium cells and batteries offered by various manufacturers.
- Standard33 pagesEnglish and French languagesale 15% off
This International Standard specifies marking, designation, dimensions, tests and require-ments for vented nickel-cadmium prismatic secondary single cells where special provisions have been made in order to have partial or, under very specific conditions, full gas recombination.
- Standard35 pagesEnglish and French languagesale 15% off
Specifies tests and requirements for vented nickel-cadmium prismatic secondary single cells.
- Standard33 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.