IEC 61169-47:2015

IEC 61169-47 ®
Edition 2.0 2015-03
INTERNATIONAL
STANDARD
colour
inside
Radio-frequency connectors –
Part 47: Sectional specification for radio-frequency coaxial connectors with
clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 61169-47 ®
Edition 2.0 2015-03
INTERNATIONAL
STANDARD
colour
inside
Radio-frequency connectors –
Part 47: Sectional specification for radio-frequency coaxial connectors with

clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.120.30 ISBN 978-2-8322-2581-3

– 2 – IEC 61169-47:2015 © IEC 2015

CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references. 6
3 Interface dimensions . 6
3.1 Dimensions . 6
3.1.1 Common dimensions . 6
3.1.2 Example of connector “F-Quick” type male plug with resilient outer
conductor sleeve (indoor) physical dimensions . 7
3.1.3 Example of connector “F-Quick” type male plug with slotted outer
conductor (indoor) physical dimensions . 8
3.1.4 Example of connector “F-Quick” type male plug with slotted outer
conductor and snap ring (indoor) physical dimensions. 8
3.2 Mechanical gauges . 9
4 Quality assessment procedures . 10
4.1 General . 10
4.2 Ratings and characteristics . 10
4.3 Environmental characteristics for outdoor sockets . 12
4.4 Test schedule and inspection requirements. 12
4.4.1 Acceptance tests . 12
4.4.2 Periodic tests . 12
4.5 Procedures for the quality conformance . 14
4.5.1 Quality conformance inspection . 14
4.5.2 Quality conformanceand its maintenance – General procedure. 14
5 Instructions for preparation of detail specifications . 14
5.1 General . 14
5.2 Identification of the component . 14
5.3 Performance . 15
5.4 Marking, ordering information and related matters . 15
5.5 Selection of tests, test conditions and severities . 15
5.6 Blank detail specification pro-forma for type F-QUICK connector . 16
6 Marking . 20
6.1 Marking of component . 20
6.2 Marking and contents of package . 20

Figure 1 – Connector “F-Quick” type male plug: general dimensions . 7
Figure 2 – Example of connector “F-Quick” type male plug with resilient outer
conductor sleeve (indoor) . 8
Figure 3 – Example of connector “F-Quick” type male plug with slotted outer conductor
(indoor) . 8
Figure 4 – Example of connector “F-Quick” type male plug with slotted outer conductor
and snap ring (indoor) . 9
Figure 5 – Mechanical gauge for resilient outer conductor . 9

Table 1 – Connector “F” type male plug (indoor) . 7
Table 2 – Ratings and characteristics . 10
Table 3 – Acceptance tests . 12
Table 4 – Periodic tests . 13

– 4 – IEC 61169-47:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 47: Sectional specification for radio-frequency coaxial
connectors with clamp coupling, typically for use in
75 Ω cable networks (type F-Quick)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61169-47 has been prepared by subcommittee 46F: R.F. and
microwave passive components, of IEC technical committee 46: Cables, wires, waveguides,
R.F. connectors, R.F. and microwave passive components and accessories.
This second edition cancels and replaces the first edition published in 2012. It constitutes a
technical revision.
The main changes are listed below:
– Subclause 3.2 has been updated to better define gauging.
– Table 2 has been updated for insertion and removal forces.
– Clause 4 has been updated to refer to the new edition of IEC 61169-1.

The text of this standard is based on the following documents:
CDV Report on voting
46F/272/CDV 46F/306/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors,
can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

– 6 – IEC 61169-47:2015 © IEC 2015
RADIO-FREQUENCY CONNECTORS –
Part 47: Sectional specification for radio-frequency coaxial
connectors with clamp coupling, typically for use in
75 Ω cable networks (type F-Quick)

1 Scope
This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for RF coaxial connectors with clamp coupling,
typically for use in 75 Ω cable networ
...