iTeh Standards logo
EURUSD
Your shopping cart is empty.
IEC

IEC TS 62993:2017/COR1:2018

(Corrigendum)

Corrigendum 1 - Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC

Corrigendum 1 - Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC

General Information

Status
Published
Publication Date
12-Jun-2018
ICS
29.080.30 - Insulation systems
Technical Committee
TC 109 - Insulation co-ordination for low-voltage equipment
Drafting Committee
JWG 4 - TC 109/JWG 4
Current Stage
PPUB - Publication issued
Start Date
13-Jun-2018
Completion Date
27-Jul-2018
Ref Project

Relations

Corrects
IEC TS 62993:2017 - Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC
Effective Date
05-Sep-2023
IEC TS 62993:2017/COR1:2018 - Corrigendum 1 - Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC Released:6/13/2018IEC TS 62993:2017/COR1:2018 - Corrigendum 1 - Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC Released:6/13/2018
PreviousNext
Technical specification
IEC TS 62993:2017/COR1:2018 - Corrigendum 1 - Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC Released:6/13/2018
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IEC TS 62993
Edition 1.0  2017-07
GUIDANCE FOR DETERMINATION OF CLEARANCES, CREEPAGE
DISTANCES AND REQUIREMENTS FOR SOLID INSULATION
FOR EQUIPMENT WITH A RATED VOLTAGE ABOVE 1 000 V AC
AND 1 500 V DC, AND UP TO 2 000 V AC AND 3 000 V DC

CORRIGENDUM 1
6.1.3.2 Conditioning
Replace the third parag
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

IEC
IEC 60664-1:2020(Main)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

IEC 60664-1:2020 deals with insulation coordination for equipment having a rated voltage up to AC 1 000 V or DC 1 500 V connected to low-voltage supply systems. This document applies to frequencies up to 30 kHz. It applies to equipment for use up to 2 000 m above sea level and provides guidance for use at higher altitudes. It provides requirements for technical committees to determine clearances, creepage distances and criteria for solid insulation. It includes methods of electrical testing with respect to insulation coordination. The minimum clearances specified in this document do not apply where ionized gases are present. Special requirements for such situations can be specified at the discretion of the relevant technical committee. This document does not deal with distances:
– through liquid insulation;
– through gases other than air;
– through compressed air.
This edition includes the following significant technical changes with respect to the previous edition:
- update of the Scope, Clauses 2 and 3,
- addition of 1 500 V DC into tables,
- new structure for Clauses 4 and 5,
- addition of Annex G with a flowchart for clearances,
- addition of Annex H with a flowchart for creepage distances,
- update of distances altitude correction in a new Table F.10.
It has the status of a basic safety publication in accordance with IEC Guide 104. The contents of the corrigendum of October 2020 have been included in this copy.

  • Standard
    175 pages
    English language
    sale 15% off
  • Standard
    167 pages
    English and French language
    sale 15% off
IEC
IEC 60664-1:2020/AMD1:2025(Amendment)
Amendment 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 60664-1:2020/COR1:2020(Corrigendum)
Corrigendum 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
  • Standard
    2 pages
    English and French language
    sale 15% off
IEC
IEC TR 63040:2016/COR1:2019(Corrigendum)
Corrigendum 1 - Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm - Test results of research on influencing parameters
  • Technical report
    1 page
    English language
    sale 15% off
IEC
IEC TS 62993:2017(Main)
Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC

IEC TS 62993:2017 gives guidance to technical committees which deal with equipment having a rated voltage of more than 1 000 V AC and up to 2 000 V AC, or a rated voltage of more than 1 500 V DC and up to 3 000 V DC. Rated voltages up to 1 000 V AC and 1 500 V DC, as well as higher or lower internal voltages, are covered by IEC 60664-1.
This document applies to equipment for use up to 2 000 m above sea level, and provides guidance for use at higher altitudes.
This document gives guidance for clearances, creepage distances and solid insulation for equipment to achieve safety. It includes methods of electric testing.
The contents of the corrigendum of June 2018 have been included in this copy.

  • Technical specification
    28 pages
    English language
    sale 15% off
IEC
IEC 60664-3:2016(Main)
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution

IEC 60664-3:2016 applies to assemblies protected against pollution by the use of coating, potting or moulding, thus allowing a reduction of clearance and creepage distances as described in IEC 60664-1. This document describes the requirements and test procedures for two methods of protection:
- type 1 protection improves the microenvironment of the parts under the protection;
- type 2 protection is considered to be similar to solid insulation. This edition includes the following significant technical changes with respect to the previous edition:
a) information added concerning interpolation;
b) provided scratch test is only for type 2 protection;
c) renumbered the scratch test to follow the visual examination test, since it makes more sense there;
d) separated the tables under what is now called Annex A, to make them clearer.

  • Standard
    77 pages
    English language
    sale 15% off
  • Standard
    50 pages
    English and French language
    sale 15% off
IEC
IEC TR 63040:2016(Main)
Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm - Test results of research on influencing parameters

IEC TR 63040:2016(E) describes test results of research on dimensioning of clearances and creepage distances, for spacing equal to or less than 2 mm for printed wiring material and other equivalent arrangements of insulation, where the clearance and the creepage distance follows the same path along the surface of solid insulation. The information contained in this document is the result of research only and cannot be used for dimensioning the clearances and creepage distances for equipment within low-voltage systems, where IEC 60664-1 applies. However distances can be taken into account for functional reasons. This document provides results of research related to the following criteria:
1) clearances independent from the micro-environment;
2) creepage distances for pollution degree 1, 2 and 3 which extends the use of smaller distances to products having design features similar to printed circuit boards;
3) creepage distances to avoid flashover of the insulating surface;
4) information on minimum creepage distances to maintain minimum insulation resistance.
A test method for the evaluation of the relevant water adsorption group for the surface of any insulating material which has not yet been classified is described.
The contents of the corrigendum of January 2019 have been included in this copy.

  • Technical report
    33 pages
    English language
    sale 15% off
IEC
IEC TR 60664-2-1:2011/COR1:2011(Corrigendum)
Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
  • Technical report
    10 pages
    English and French language
    sale 15% off
IEC
IEC TR 60664-2-1:2011(Main)
Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

IEC/TR 60664-2-1:2011, which is a technical report, serves as an application guide for technical committees and manufacturers specifying dimensioning requirements for products in accordance with the IEC 60664 series. The significant items for consideration are as follows:
a) nominal system voltage(s) or rated insulation voltage(s);
b) overvoltage category of the products (OV cat.);
c) any type of overvoltages;
d) frequency of the voltage;
e) characteristics of the solid insulating material;
f) pollution degree and humidity levels.
The main changes with respect to the previous edition are listed below:
- the previous edition was only an application guide for IEC 60664-1. This second edition takes into account not only IEC 60664-1 but also the other parts IEC 60664-3, IEC 60664-4, and IEC 60664-5 and their interrelation;
- principles of the IEC 60664 series for insulation dimensioning of LV equipment are explained and examples of practical application are provided together with some background information;
- Annex A provides an overview of clauses of IEC 60664-1 requiring decisions by technical committees, or specification of options, or requiring activities of the manufacturer;
- Annex B provides an overview of such clauses of IEC 60664-4;
- Annex C provides an overview of such clauses of IEC 60664-5;
- Annex D amends the tables of Annex F of IEC 60664-1:2007 with rated impulse voltages for voltages line to neutral derived from nominal d.c. voltages up to and including 1 500 V.
The contents of the corrigendum of October 2011 have been included in this copy.

  • Technical report
    132 pages
    English and French language
    sale 15% off
  • Technical report
    132 pages
    English and French language
    sale 15% off
IEC
IEC 60664-3:2003/AMD1:2010/COR1:2010(Amendment)
Corrigendum 1 to amendment 1 - Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
  • Standard
    10 pages
    English and French language
    sale 15% off