Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements

IEC 61158-4-3:2007 specifies the procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This first edition and its companion parts of the IEC 61158-4 subseries cancel and replace IEC 61158-4:2003. It constitutes an editorial revision. It includes the following changes:
- deletion of the former Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data link layer, for lack of market relevance;
- addition of new types of fieldbuses;
- division of this part into multiple parts numbered -4 1, -4 2, , -4-19. This bilingual version (2014-08) corresponds to the English version, published in 2007-12.

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 4-3: Spécification du protocole de la couche liaison de données - Eléments de type 3

L'IEC 61158-4-3:2007 spécifie des procédures de transfert en temps opportun de données et d'informations de commande d'une entité utilisateur de liaison de données à une entité utilisateur homologue ainsi qu'entre entités de liaison de données qui constituent le fournisseur de services distribués de la liaison et la structure des DLPDU de bus de terrain utilisées pour le transfert des données et les des informations de commande par le protocole objet de la présente norme, ainsi que leur représentation en tant qu'unité de données d'interface de couche physique. Cette première édition et ses parties d'accompagnement de la sous-série CEI 61158-4 annulent et remplacent la CEI 61158-4:2003. Elle constitue une révision éditoriale. Cette édition de la CEI 61158-4 inclut les modifications suivantes:
- suppression du précédent bus de terrain de Type 6 et de la référence à une couche de liaison de données de bus de terrain de Type 5, en raison du manque d'adéquation au marché;
- ajout de nouveaux types de bus de terrain;
- division de cette partie en parties multiples numérotées -4 1, -4 2, , -4-19. La présente version bilingue (2014-08) correspond à la version anglaise monolingue publiée en 2007-12.

General Information

Status
Published
Publication Date
13-Dec-2007
Technical Committee
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
05-Aug-2010
Ref Project

Relations

Buy Standard

Standard
IEC 61158-4-3:2007 - Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements Released:12/14/2007 Isbn:2831894298
English language
171 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61158-4-3:2007 - Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements Released:12/14/2007 Isbn:9782832217764
English and French language
346 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61158-4-3
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 4-3: Data-link layer protocol specification – Type 3 elements

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61158-4-3
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 4-3: Data-link layer protocol specification – Type 3 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XH
ICS 35.100.20; 25.040.40 ISBN 2-8318-9429-8

– 2 – 61158-4-3 © IEC:2007(E)
CONTENTS
FOREWORD.6

INTRODUCTION.8

1 Scope.9

1.1 General .9

1.2 Specifications.9

1.3 Procedures.9

1.4 Applicability.9

1.5 Conformance.10
2 Normative references .10
3 Terms, definitions, symbols and abbreviations.10
3.1 Reference model terms and definitions.10
3.2 Service convention terms and definitions.12
3.3 Common terms and definitions .13
3.4 Additional Type 3 definitions.15
3.5 Common symbols and abbreviations .17
3.6 Type 3 symbols and abbreviations.18
4 Common DL-protocol elements.22
4.1 Frame check sequence .22
5 Overview of the DL-protocol .24
5.1 General .24
5.2 Overview of the medium access control and transmission protocol .25
5.3 Transmission modes and DL-entity.26
5.4 Service assumed from the PhL .31
5.5 Operational elements .34
5.6 Cycle and system reaction times .50
6 General structure and encoding of DLPDUs, and related elements of procedure .53
6.1 DLPDU granularity .53
6.2 Length octet (LE, LEr) .54
6.3 Address octet .55
6.4 Control octet (FC).57
6.5 DLPDU content error detection.61
6.6 DATA_UNIT .62

6.7 Error control procedures.62
7 DLPDU-specific structure, encoding and elements of procedure .64
7.1 DLPDUs of fixed length with no data field.64
7.2 DLPDUs of fixed length with data field.65
7.3 DLPDUs with variable data field length.67
7.4 Token DLPDU .68
7.5 ASP DLPDU .69
7.6 SYNCH DLPDU .69
7.7 Time Event (TE) DLPDU.69
7.8 Clock Value (CV) DLPDU .69
7.9 Transmission procedures .70
8 Other DLE elements of procedure.73
8.1 DL-entity initialization .73
8.2 States of the media access control of the DL-entity .73

61158-4-3 © IEC:2007(E) – 3 –
8.3 Clock synchronization protocol .79

Annex A (normative) – DL-Protocol state machines .84

A.1 Overall structure.84

A.2 Variation of state machines in different devices .85

A.3 DL Data Resource .86

A.4 FLC / DLM.91

A.5 MAC.115

A.6 SRU .143

Annex B (informative) – Type 3 (synchronous): exemplary FCS implementations. 161

Annex C (informative) – Type 3: Exemplary token procedure and message transfer
periods .163
C.1 Procedure of token passing .163
C.2 Examples for token passing procedure . 164
C.3 Examples for message transfer periods – asynchronous transmission.169
C.4 Examples for message transfer periods – synchronous transmission. 170
Bibliography.171

Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses .14
Figure 2 – Logical token-passing ring .27
Figure 3 – PhL data service for asynchronous transmission .31
Figure 4 – Idle time T .37
ID1
Figure 5 – Idle time T (SDN, CS) .37
ID2
Figure 6 – Idle time T (MSRD) .38
ID2
Figure 7 – Slot time T .38
SL1
Figure 8 – Slot time T .39
SL2
Figure 9 – Slot time T .44
SL1
Figure 10 – Slot time T .44
SL2
Figure 11 – Token transfer period .50
Figure 12 – Message transfer period.51
Figure 13 – UART character .53
Figure 14 – Octet structure .54
Figure 15 – Length octet coding.54

Figure 16 – Address octet coding.55
Figure 17 – DAE/SAE octet in the DLPDU.56
Figure 18 – Address extension octet .56
Figure 19 – FC octet coding for send/request DLPDUs .57
Figure 20 – FC octet coding for acknowledgement or response DLPDUs .58
Figure 21 – FCS octet coding.61
Figure 22 – Data field .62
Figure 23 – Ident user data.62
Figure 24 – DLPDUs of fixed length with no data field.64
Figure 25 – DLPDUs of fixed length with no data field.65
Figure 26 – DLPDUs of fixed length with data field .66
Figure 27 – DLPDUs of fixed length with data field .66

– 4 – 61158-4-3 © IEC:2007(E)
Figure 28 – DLPDUs with variable data field length.67

Figure 29 – DLPDUs with variable data field length.68

Figure 30 – Token DLPDU .68

Figure 31 – Token DLPDU .69

Figure 32 – Send/request DLPDU of fixed length with no data .70

Figure 33 – Token DLPDU and send/request DLPDU of fixed length with data.70

Figure 34 – Send/request DLPDU with variable data field length.71

Figure 35 – Send/request DLPDU of fixed length with no data .71

Figure 36 – Token DLPDU and send/request DLPDU of fixed length with data.72
Figure 37 – Send/request DLPDU with variable data field length.
...


IEC 61158-4-3 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 4-3: Data-link layer protocol specification – Type 3 elements

Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 4-3: Spécification du protocole de la couche liaison de données –
Éléments de Type 3
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61158-4-3 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –

Part 4-3: Data-link layer protocol specification – Type 3 elements

Réseaux de communication industriels – Spécifications des bus de terrain –

Partie 4-3: Spécification du protocole de la couche liaison de données –

Éléments de Type 3
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 25.040.40; 35.100.20 ISBN 978-2-8322-1776-4

– 2 – IEC 61158-4-3:2007 © IEC 2007
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
1.1 General . 9
1.2 Specifications . 9
1.3 Procedures . 9
1.4 Applicability . 9
1.5 Conformance . 10
2 Normative references . 10
3 Terms, definitions, symbols and abbreviations . 10
3.1 Reference model terms and definitions . 10
3.2 Service convention terms and definitions . 12
3.3 Common terms and definitions . 13
3.4 Additional Type 3 definitions. 15
3.5 Common symbols and abbreviations . 17
3.6 Type 3 symbols and abbreviations . 18
4 Common DL-protocol elements . 22
4.1 Frame check sequence . 22
5 Overview of the DL-protocol . 24
5.1 General . 24
5.2 Overview of the medium access control and transmission protocol . 25
5.3 Transmission modes and DL-entity . 26
5.4 Service assumed from the PhL . 31
5.5 Operational elements . 34
5.6 Cycle and system reaction times . 50
6 General structure and encoding of DLPDUs, and related elements of procedure . 53
6.1 DLPDU granularity . 53
6.2 Length octet (LE, LEr) . 54
6.3 Address octet . 55
6.4 Control octet (FC) . 57
6.5 DLPDU content error detection . 61
6.6 DATA_UNIT . 62
6.7 Error control procedures . 62
7 DLPDU-specific structure, encoding and elements of procedure . 64
7.1 DLPDUs of fixed length with no data field . 64
7.2 DLPDUs of fixed length with data field . 65
7.3 DLPDUs with variable data field length . 67
7.4 Token DLPDU . 68
7.5 ASP DLPDU . 69
7.6 SYNCH DLPDU . 69
7.7 Time Event (TE) DLPDU . 69
7.8 Clock Value (CV) DLPDU . 69
7.9 Transmission procedures . 70
8 Other DLE elements of procedure. 73
8.1 DL-entity initialization . 73
8.2 States of the media access control of the DL-entity . 73

8.3 Clock synchronization protocol . 79
Annex A (normative) – DL-Protocol state machines . 84
A.1 Overall structure . 84
A.2 Variation of state machines in different devices . 85
A.3 DL Data Resource . 86
A.4 FLC / DLM . 91
A.5 MAC . 115
A.6 SRU . 143
Annex B (informative) – Type 3 (synchronous): exemplary FCS implementations . 161
Annex C (informative) – Type 3: Exemplary token procedure and message transfer
periods . 163
C.1 Procedure of token passing . 163
C.2 Examples for token passing procedure . 164
C.3 Examples for message transfer periods – asynchronous transmission . 169
C.4 Examples for message transfer periods – synchronous transmission . 170
Bibliography . 171

Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses . 14
Figure 2 – Logical token-passing ring . 27
Figure 3 – PhL data service for asynchronous transmission . 31
Figure 4 – Idle time T .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.