IEC 60086-1:2015
(Main)Primary batteries - Part 1: General
Primary batteries - Part 1: General
IEC 60086-1:2015 is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. As a primary battery classification tool, electrochemical systems are also standardized with respect to system letter, electrodes, electrolyte, nominal and maximum open circuit voltage. The object of this part of IEC 60086 is to benefit primary battery users, device designers and battery manufacturers by ensuring that batteries from different manufacturers are interchangeable according to standard form, fit and function. Furthermore, to ensure compliance with the above, this part specifies standard test methods for testing primary cells and batteries. This twelfth edition cancels and replaces the eleventh edition (2011) and constitutes a technical revision. The major technical changes with respect to the previous edition are:
- the order of the Annexes was changed to the order in which they appearin the document and a caption was added to indicate where the Annex information first appears in the document;
- the humidity conditions for non P-system batteries in Table 3 was modified;
- the standard discharge voltage for the Y and W chemistries was determined to be at 3,5 V and 2,8 V respectively;
- details on capacity measurement were moved from Annex E to Subclause 5.1.
- the coin/button cell and battery definition was clarified in order to better address issues with the swallowing of coin cells. Keywords: fundamental requirements and information on primary cells and batteries
Piles électriques - Partie 1: Généralités
L'IEC 60086-1:2015 est destinée à normaliser les piles électriques en ce qui concerne les points suivants: dimensions, nomenclature, configurations des bornes, marquages, méthodes d’essai, caractéristiques types de fonctionnement, sécurité et aspects environnementaux. En tant qu'outil de classification des piles électriques, les systèmes électrochimiques sont aussi normalisés en ce qui concerne leurs lettres de système, les électrodes, les électrolytes, les tensions en circuit ouvert nominales et maximales. L’objet de la présente partie de l'IEC 60086-1 est d’assurer aux utilisateurs de piles, aux concepteurs d’appareils et aux fabricants que les piles de fabricants différents sont interchangeables de par leur forme, leur montage et leur fonction qui sont normalisés. De plus, pour assurer la conformité avec ce qui précède, la présente partie spécifie des méthodes d’essai normalisées pour les piles électriques. Cette douzième édition annule et remplace la onzième édition parue en 2011. Elle constitue une révision technique. Les modifications techniques majeures par rapport à l’édition précédente, sont les suivantes:
- l'ordre des Annexes a été modifié pour respecter l'ordre dans lequel elles apparaissent dans le document et une légende a été ajoutée pour indiquer où une Annexe donnée est citée pour la première fois dans le document;
- les conditions d'humidité pour les piles qui ne sont pas du système P ont été modifiées dans le Tableau 3;
- la tension de décharge normalisée pour les systèmes électrochimiques Y et W a été déterminée comme étant de 3,5 V et 2,8 V respectivement;
- les indications détaillées concernant la mesure de la capacité ont été déplacées de l'Annexe E en 5.1.
- la définition de la pile / de l'élément bouton a été clarifiée afin de mieux mieux traiter les aspects liés à l'ingestion des éléments ou piles boutons. Mots clés: exigences et informations fondamentales concernant les piles électriques.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60086-1 ®
Edition 12.0 2015-07
INTERNATIONAL
STANDARD
Primary batteries –
Part 1: General
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 60086-1 ®
Edition 12.0 2015-07
INTERNATIONAL
STANDARD
Primary batteries –
Part 1: General
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.220.10 ISBN 978-2-8322-2813-5
– 2 – IEC 60086-1:2015 © IEC 2015
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Requirements . 11
4.1 General . 11
4.1.1 Design . 11
4.1.2 Battery dimensions . 11
4.1.3 Terminals . 11
4.1.4 Classification (electrochemical system) . 13
4.1.5 Designation . 14
4.1.6 Marking . 14
4.1.7 Interchangeability: battery voltage . 15
4.2 Performance . 16
4.2.1 Discharge performance . 16
4.2.2 Dimensional stability . 16
4.2.3 Leakage . 16
4.2.4 Open-circuit voltage limits . 16
4.2.5 Service output . 16
4.2.6 Safety . 16
5 Performance – Testing . 17
5.1 General . 17
5.2 Discharge testing . 17
5.2.1 General . 17
5.2.2 Application tests . 17
5.2.3 Service output tests . 18
5.3 Conformance check to a specified minimum average duration . 18
5.4 Calculation method of the specified value of a minimum average duration . 19
5.5 OCV testing . 19
5.6 Battery dimensions . 19
5.7 Leakage and deformation . 19
6 Performance – Test conditions . 19
6.1 Storage and discharge conditions . 19
6.2 Commencement of discharge tests after storage . 20
6.3 Discharge test conditions . 20
6.3.1 General . 20
6.3.2 Compliance . 20
6.4 Load resistance . 20
6.5 Time periods . 20
6.6 Test condition tolerances . 21
6.7 Activation of ‘P’-system batteries . 21
6.8 Measuring equipment . 21
6.8.1 Voltage measurement . 21
6.8.2 Mechanical measurement . 21
7 Sampling and quality assurance . 21
8 Battery packaging . 21
Annex A (normative) Criteria for the standardization of batteries . 22
Annex B (informative) Recommendations for equipment design . 23
B.1 Technical liaison . 23
B.2 Battery compartment . 23
B.2.1 General . 23
B.2.2 Limiting access by children . 24
B.3 Voltage cut-off . 24
Annex C (normative) Designation system (nomenclature) . 25
C.1 General . 25
C.2 Designation system in use up to October 1990. 25
C.2.1 General . 25
C.2.2 Cells . 25
C.2.3 Electrochemical system . 27
C.2.4 Batteries . 28
C.2.5 Modifiers . 28
C.2.6 Examples. 28
C.3 Designation system in use since October 1990 . 28
C.3.1 General . 28
C.3.2 Round batteries . 28
C.3.3 Non-round batteries . 32
C.3.4 Ambiguity . 35
Annex D (informative) Standard discharge voltage U – Definition and method of
s
determination . 37
D.1 Definition . 37
D.2 Determination . 37
D.2.1 General considerations: the C/R-plot . 37
D.2.2 Determination of the standard discharge resistor R . 38
s
D.2.3 Determination of the standard discharge capacity C and standard
s
discharge time t . 39
s
D.3 Experimental conditions to be observed and test results . 39
Annex E (informative) Preparation of standard methods of measuring performance
(SMMP) of consumer goods . 41
E.1 General . 41
E.2 Performance characteristics . 41
E.3 Criteria for the development of test methods . 41
Annex F (informative) Calculation method for the specified value of minimum average
duration . 42
Annex G (normative) Code of practice for packaging, shipment, storage, use and
disposal of primary batteries . 43
G.1 General . 43
G.2 Packaging . 43
G.3 Transport and handling . 43
G.4 Storage and stock rotation . 43
G.5 Displays at sales points . 44
G.6 Selection, use and disposal . 44
G.6.1 Purchase . 44
G.6.2 Installation . 44
G.6.3 Use .
...
IEC 60086-1 ®
Edition 12.0 2015-07
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Primary batteries –
Part 1: General
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 60086-1 ®
Edition 12.0 2015-07
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Primary batteries –
Part 1: General
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.220.10 ISBN 978-2-8322-2825-8
– 2 – IEC 60086-1:2015 RLV © IEC 2015
CONTENTS
FOREWORD . 5
INTRODUCTION . 2
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Requirements . 11
4.1 General . 11
4.1.1 Design . 11
4.1.2 Battery dimensions . 12
4.1.3 Terminals . 12
4.1.4 Classification (electrochemical system) . 14
4.1.5 Designation . 15
4.1.6 Marking . 15
4.1.7 Interchangeability: battery voltage . 16
4.2 Performance . 17
4.2.1 Discharge performance . 17
4.2.2 Dimensional stability . 17
4.2.3 Leakage . 17
4.2.4 Open-circuit voltage limits . 17
4.2.5 Service output . 18
4.2.6 Safety . 18
5 Performance – Testing . 18
5.1 General . 18
5.2 Discharge testing . 18
5.2.1 General . 18
5.2.2 Application tests . 19
5.2.3 Service output tests . 19
5.3 Conformance check to a specified minimum average duration . 20
5.4 Calculation method of the specified value of a minimum average duration . 20
5.5 OCV testing . 20
5.6 Battery dimensions . 20
5.7 Leakage and deformation . 20
6 Performance – Test conditions . 20
6.1 Pre-discharge conditioning Storage and discharge conditions . 20
6.2 Commencement of discharge tests after storage . 21
6.3 Discharge test conditions . 21
6.3.1 General . 21
6.3.2 Compliance . 21
6.4 Load resistance . 21
6.5 Time periods . 22
6.6 Test condition tolerances . 22
6.7 Activation of ‘P’-system batteries . 22
6.8 Measuring equipment . 22
6.8.1 Voltage measurement . 22
6.8.2 Mechanical measurement . 23
7 Sampling and quality assurance . 23
7.1 General .
7.2 Sampling.
7.2.1 Testing by attributes .
7.2.2 Testing by variables .
7.3 Product quality indices .
7.3.1 General .
7.3.2 Capability index (c ) .
p
7.3.3 Capability index (c ) .
pk
7.3.4 Performance index (p ) .
p
7.3.5 Performance index (p ) .
pk
8 Battery packaging . 24
Annex A (normative) Guidelines Criteria for the standardization of batteries . 25
Annex B (normative informative) Recommendations for equipment design . 26
B.1 Technical liaison . 26
B.2 Battery compartment . 26
B.2.1 General . 26
B.2.2 Limiting access by children . 27
B.3 Voltage cut-off . 27
Annex C (normative) Designation system (nomenclature) . 28
C.1 General . 28
C.2 Designation system in use up to October 1990. 28
C.2.1 General . 28
C.2.2 Cells . 28
C.2.3 Electrochemical system . 30
C.2.4 Batter ies . 31
C.2.5 Modifiers . 31
C.2.6 Ex am pl es . 31
C.3 Designation system in use since October 1990 . 31
C.3.1 General . 31
C.3.2 Round batteries . 31
C.3.3 Non-round batteries . 35
C.3.4 Ambiguity . 38
Annex D (informative) Standard discharge voltage U – Definition and method of
s
de t er m in at i on . 40
D.1 Definition . 40
D.2 Determination . 40
D.2.1 General considerations: the C/R - p l o t . 40
D.2.2 Determination of the standard discharge resistor R . 41
s
D.2.3 Determination of the standard discharge capacity C and standard
s
discharge time t . 42
s
D.3 Experimental conditions to be observed and test results . 42
Annex E (informative) Preparation of standard methods of measuring performance
(SMMP) of consumer goods . 44
E.1 Overview General . 44
E.2 Performance char ac t e r i s t ic s . 44
E.3 Criteria for the development of test methods . 44
Annex F (informative) Calculation method for the specified value of minimum average
durati
...
IEC 60086-1 ®
Edition 12.0 2015-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Primary batteries –
Part 1: General
Piles électriques –
Partie 1: Généralités
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.
IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60086-1 ®
Edition 12.0 2015-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Primary batteries –
Part 1: General
Piles électriques –
Partie 1: Généralités
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.10 ISBN 978-2-8322-8893-1
– 2 – IEC 60086-1:2015 © IEC 2015
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Requirements . 11
4.1 General . 11
4.1.1 Design . 11
4.1.2 Battery dimensions . 11
4.1.3 Terminals . 11
4.1.4 Classification (electrochemical system) . 13
4.1.5 Designation . 14
4.1.6 Marking . 14
4.1.7 Interchangeability: battery voltage . 15
4.2 Performance . 16
4.2.1 Discharge performance . 16
4.2.2 Dimensional stability . 16
4.2.3 Leakage . 16
4.2.4 Open-circuit voltage limits . 16
4.2.5 Service output . 16
4.2.6 Safety . 16
5 Performance – Testing . 17
5.1 General . 17
5.2 Discharge testing . 17
5.2.1 General . 17
5.2.2 Application tests . 17
5.2.3 Service output tests . 18
5.3 Conformance check to a specified minimum average duration . 18
5.4 Calculation method of the specified value of a minimum average duration . 19
5.5 OCV testing . 19
5.6 Battery dimensions . 19
5.7 Leakage and deformation . 19
6 Performance – Test conditions . 19
6.1 Storage and discharge conditions . 19
6.2 Commencement of discharge tests after storage . 20
6.3 Discharge test conditions . 20
6.3.1 General . 20
6.3.2 Compliance . 20
6.4 Load resistance . 20
6.5 Time periods . 20
6.6 Test condition tolerances . 21
6.7 Activation of ‘P’-system batteries . 21
6.8 Measuring equipment . 21
6.8.1 Voltage measurement . 21
6.8.2 Mechanical measurement . 21
7 Sampling and quality assurance . 21
8 Battery packaging . 21
Annex A (normative) Criteria for the standardization of batteries . 22
Annex B (informative) Recommendations for equipment design . 23
B.1 Technical liaison . 23
B.2 Battery compartment . 23
B.2.1 General . 23
B.2.2 Limiting access by children . 24
B.3 Voltage cut-off . 24
Annex C (normative) Designation system (nomenclature) . 25
C.1 General . 25
C.2 Designation system in use up to October 1990. 25
C.2.1 General . 25
C.2.2 Cells . 25
C.2.3 Electrochemical system . 28
C.2.4 Batteries . 28
C.2.5 Modifiers . 28
C.2.6 Examples. 28
C.3 Designation system in use since October 1990 . 28
C.3.1 General . 28
C.3.2 Round batteries . 29
C.3.3 Non-round batteries . 32
C.3.4 Ambiguity . 35
Annex D (informative) Standard discharge voltage U – Definition and method of
s
determination . 37
D.1 Definition . 37
D.2 Determination . 37
D.2.1 General considerations: the C/R-plot . 37
D.2.2 Determination of the standard discharge resistor R . 38
s
D.2.3 De
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.