IEC 60384-14-1:2005

INTERNATIONAL IEC
STANDARD 60384-14-1
QC 302401
Second edition
2005-07
Fixed capacitors for use in electronic equipment –
Part 14-1:
Blank detail specification:
Fixed capacitors for electromagnetic
interference suppression and connection
to the supply mains – Assessment level D
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD 60384-14-1
QC 302401
Second edition
2005-07
Fixed capacitors for use in electronic equipment –
Part 14-1:
Blank detail specification:
Fixed capacitors for electromagnetic
interference suppression and connection
to the supply mains – Assessment level D

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
M
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – 60384-14-1  IEC:2005(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT

Part 14-1: Blank detail specification:
Fixed capacitors for electromagnetic interference suppression
and connection to the supply mains –
Assessment level D
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard CEI 60384-14-1 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This second edition of CEI 60384-14-1 cancels and replaces the first edition published in
1993. It constitutes a technical revision. All changes that have been agreed upon can be
categorized as minor revisions.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1553/FDIS 40/1587/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

60384-14-1  IEC:2005(E) – 3 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
It should be read in conjunction with IEC 60384-1 and IEC 60384-14.
This standard forms Part 14-1 of IEC 60384, which is published under the general title Fixed
capacitors for use in electronic equipment.
Part 1: Generic specification
Part 14 is composed as follows:
Part 14: Sectional specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains
Part 14-1: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Assessment level D
Part 14-2: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Safety tests only
Part 14-3: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Assessment level DZ
NOTE For the complete list of all the parts, see IEC 60384-14.

The QC number that appears on the front cover of this publication is the specification number in the
IEC Quality Assessment System for Electronic Components (IECQ).
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this standard may be issued at a later date.

– 4 – 60384-14-1  IEC:2005(E)
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT

Part 14-1: Blank detail specification:
Fixed capacitors for electromagnetic interference suppression
and connection to the supply mains –
Assessment level D
Blank detail specification
A blank detail specification is a supplementary document to the sectional specification and
contains requirements for style and layout and minimum content of detail specifications. In the
preparation of detail specifications, the content of 1.4 of the sectional specification shall be
taken into account.
Identification of the detail specification and of the component
The first page of the detail specification should have the layout recommended on the next
page of this blank detail specification. The numbers between brackets correspond to the
following information which shall be inserted at the position indicated.
[1] The name of the National Standards Organization under whose authority the detail
specification is published and, if applicable, the organization from which the detail
specification is available.
[2] The IECQ symbol and the number allotted to the detail specification by the IECQ
General Secretariat.
[3] The number and issue number of the IECQ generic or sectional specification as
relevant; also the national reference if different.
[4] If different from the IECQ number, the national number of the detail specification, date
of issue and any further information required by the national system, together with any
amendment numbers.
[5] A brief description of the component or range of components.
[6] Information on typical construction (when applicable).
For [5] and [6] the text to be given in the detail specification should be suitable for an entry in
the IECQ Register of Approvals.
[7] Outline drawing with main dimensions which are of importance for inter-changeability
and/or reference to the appropriate national or international documents for outlines.
Alternatively, the drawing may be given in an annex to the detail specification, but [7]
should always contain an illustration of the general outer appearance of the component.
[8] The level(s) of quality assessment covered by the detail specification, as appropriate.
[9] Reference data giving information on the most important properties of the component
which allow comparison between the various component types intended for the same or
similar applications.
60384-14-1  IEC:2005(E) – 5 –

[1] [2]
IEC 60384-14-1xx
QC 302401-xxx
[4]
IEC 60384-14-1
QC 302401
ELECTRONIC COMPONENTS OF [3]
ASSESSED QUALITY – DETAIL
SPECIFICATION IN ACCORDANCE WITH:

[7] [5]
Outline drawing (.angle projection): FIXED CAPACITORS FOR
ELECTROMAGNETIC INTERFERENCE
SUPPRESSION AND CONNECTION
TO THE SUPPLY MAINS
[6]
TYPICAL CONSTRUCTION (Examples):

(Other shapes are permitted within the dimensions
Assessment level D [8]
given, see Table 1)
For notes [ ], see preceding page.

REFERENCE DATA: [9]
Information on the availability of components qualified to this detail
specification is given in IEC QC 001005.

– 6 – 60384-14-1  IEC:2005(E)
1 General data
1.1 Method of mounting for vibration and bump or shock tests
See 1.4.2 of IEC 60384-14.
1.2 Dimensions
Table 1 – Case-size dimensions
Case-size Dimensions
reference mm
L W H L L L .
1 2 3 4
NOTE 1 When there is no case-size reference, Table 1 may be omitted and
the dimensions should be given in Table 2, which then becomes Table 1.
NOTE 2 The dimensions should be given as maximum dimensions or as
nominal dimensions with the tolerance.

1.3 Ratings and characteristics
Capacitance range  (see Table 2)
Tolerance on rated capacitance
Rated voltage  (see Table 2)
Climatic category
Rated temperature
Tangent of loss angle
Insulation resistance
Table 2 – Values of capacitance related to voltages and case sizes
Rated voltage
Case size Case size Case size Case size

Rated capacitance
(in pF and/or nF)
1.4 Normative references
The following referenced documents are indisipensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
ICE 60384-1, Fixed capacitors for use in electronic equipment – Part 1: Generic specification
ICE 60384-14, Fixed capacitors for use in electronic equipment – Part 14: Sectional
specification: Fixed capacitors for electromagnetic interference suppression and connection to
the supply mains
60384-14-1  IEC:2005(E) – 7 –
1.5 Marking
The marking of the capacitor, if any, and the packing shall be in accordance with 1.6 of the
sectional specification.
NOTE The details of the marking of the component and packing should be given in full in the detail specification.
1.6 Ordering information
Orders for capacitors covered by this specification shall contain, in clear or in coded form, the
following information:
a) rated capacitance;
b) tolerance on rated capacitance;
c) rated voltage;
d) manufacturer's type designation;
e) number and issue reference of the detail specification and style reference.
1.7 Certified records of released lots
Required/not required.
1.8 Additional information (not for inspection purposes)
1.9 Additional or increased severities or requirements to those specified in the
generic and/or sectional specification
NOTE Additional or increased requirements should be specified only when essential.
Table 3 – Other characteristics
This table shall be used for defining characteristics which are
...