IEC 60350-1:2011/COR2:2013
(Corrigendum)Corrigendum 2 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
Corrigendum 2 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
Corrigendum 2 - Appareils de cuisson électrodomestiques - Partie 1: Cuisinières, fours, fours à vapeur et grils - Méthodes de mesure de l'aptitude à la fonction
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60350-1 CEI 60350-1
(First edition – 2011) (Première édition – 2011)
Household electric cooking appliances – Appareils de cuisson électrodomestiques –
Part 1: Ranges, ovens, steam ovens and grills – Partie 1: Cuisinières, fours, fours à vapeur et
Methods for measuring performance grils – Méthodes de mesure de
l'aptitude à la fonction
CO RRI G E NDUM 2
FOREWORD AVANT-PROPOS
Add, before "The text of this standard…" Ajouter, avant " Le texte de cette norme…"
the followi
...
This May Also Interest You
IEC 60704-2-13:2023 applies to cooking fume extractors for household and similar use intended for filtering the air of a room or for exhausting the air out of a room, including their accessories and their component parts. It also applies to cooking fume extractors where the fan is mounted separately from the appliance inside or outside of the room where the appliance is located, but controlled by the appliance when the fan is defined in the technical documentation. This document deals also with down-draft systems that are arranged beside, behind or under the cooking appliance.
Measurements carried out in accordance with this document determine the noise emission into the room, from which cooking fumes are extracted. Noise emission to the outside (e.g. through air ducts) are not considered.
This fourth edition cancels and replaces the third edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with IEC 61591:2023;
b) change of title, scope and definitions 3.103 and 3.104: this document deals with cooking fume extractors (this covers range hoods and down-draft systems);
c) exhaust pipe of down-draft systems specified;
d) built-in range hoods in recirculation mode with an air outlet device specified;
e) alignment with IEC 60704-1:2021.
This document is to be used in conjunction with IEC 60704-1:2021.
- Standard39 pagesEnglish and French languagesale 15% off
IEC 61591:2023 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen. It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation. This document deals also with down-draft systems arranged beside, behind or under the cooking appliance. This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31. Cooking fume extractors without fans operated by a central ventilation system are covered in EN 13141-3. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) new definition of working point, see 3.19;
b) new definition for lowest setting and automatic setting, see 3.17 and 3.18;
c) revised requirements for installation and positioning, see 6.2;
d) added a normative reference ISO 5801 for the specification of the pressure compensation chamber, see Clause 10;
e) separate clauses for determining the volumetric airflow and fluid dynamic efficiency, see Clauses 10 and 11;
f) new approach for determining the fluid dynamic efficiency ("9-point calculation");
g) new definitions, new clause and new Annex B regarding the measurement of low-power modes;
h) new Annex A: assumption for the parameter b.
- Standard114 pagesEnglish languagesale 15% off
- Standard75 pagesEnglish and French languagesale 15% off
IEC 60350-1:2023 is available as IEC 60350-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60350-1:2023 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. This document is also applicable to portable appliances with similar functionalities that were previously covered by the withdrawn IEC 61817. The ovens covered by this document can be with or without microwave function. Manufacturers are expected to define the primary cooking function of the appliance – microwave function or thermal heat. The primary cooking function is measured with an existing method according to energy consumption. If the primary cooking function is declared in the instruction manual as a microwave function, IEC 60705 is applied for energy consumption measurement. If the primary cooking function is declared as a thermal heat, then IEC 60350-1 is applied for energy consumption measurement. If the primary function is not declared by the manufacturer, the performance of the microwave function and thermal heat is measured as far as it is possible. For measurement of energy consumption and time for heating a load (see Clause 8), this document is furthermore not applicable to:
- microwave combination function;
- ovens with reciprocating trays or turntable;
- small cavity ovens (see 3.16);
- ovens without adjustable temperature control;
- heating functions and eco functions other than defined in this document;
- appliances with only solo steam function.
This document does not apply to microwave ovens (IEC 60705). This document defines the main performance characteristics of these appliances that are of interest to the user and specifies methods for measuring these characteristics.
This document does not specify a classification or ranking for performance. This document does not deal with safety requirements (IEC 60335-2-6 and IEC 60335-2-9). Appliances covered by this document can be built-in or for placing on a working surface or the floor. There is no measurement method for the energy consumption for grilling and steam functions available. This third edition cancels and replaces the second edition published in 2016 and Interpretation Sheet 1:2021. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) new definitions for heating function, eco function and definitions relevant for low power mode considerations are amended in Clause 3;
b) order of clauses is changed;
c) revision of 5.3;
d) update of 6.2 in order to improve the reliability of volume measurement;
e) removal of 6.7, Level of shelf;
f) revision of Clause 7 concerning the accuracy of eco functions with residual heat use;
g) revision of Clause 8 in order to improve the reliability of the method for measuring the energy consumption, especially regarding anti-circumvention;
h) unique energy consumption measurement for all heating functions and eco functions with an indication of the energy consumption for a temperature increase of 165 K (compared to 155 K currently for forced air circulation function, for example), which results in higher energy consumption values compared to the previous edition;
i) Ry replaced by L* in Clause 9 and reference to IEC TS 63350;
j) cooking time for reference measurement introduced for broccoli in Clause 10;
k) yellow part replaced by hue angle value in Clause 10;
l) requirements for digital assessment (see former 7.5.3.6.3) are obsolete as specified in IEC TS 63350;
m) revision of Clause 14 (Consumption measurement of low power modes, previous Clause 12);
n) former Annex G (informative) is cancelled due to the fact that this method for measuring an associated activity has been not applied;
o) former Annexes B and F are obsolete, up-to-date shade charts are specifie
- Standard261 pagesEnglish languagesale 15% off
- Standard161 pagesEnglish and French languagesale 15% off
IEC TS 63350:2022 specifies generic requirements for creating a digital system that is used for measuring the characteristics of visually detectable performance, such as browning intensity and lightness.
It defines the metrological requirements of this digital system and demonstrates the procedures for compliance. The digital system contains the measuring instrument, the software, and the reference materials necessary to realize the measurement process.
References to this document can be made by a customer when specifying the digital system and by the suppliers when specifying products offered.
Interested parties can agree to use this document as an input for satisfying measurement management system requirements in any activities.
The principles of ISO 10012 are followed to ensure the capability of the systems.
Currently, this document focuses on test methods described in IEC 60350-1 and IEC 60350-2 but further applications based on visually detectable performance criteria might be supplemented.
- Technical specification28 pagesEnglish languagesale 15% off
- Standard24 pagesEnglish and French languagesale 15% off
IEC 60350-1:2016 is available as IEC 60350-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60350-1:2016 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. The ovens covered by this standard may be with or without microwave function. Manufacturers should define the primary cooking function of the appliance microwave function or thermal heat. The primary cooking function should be measured with an existing method according to energy consumption. If the primary cooking function is declared in the instruction manual as a microwave function, IEC 60705 is applied for energy consumption measurement. If the primary cooking function is declared as a thermal heat, then IEC 60350-1 is applied for energy consumption measurement. If the primary function is not declared by the manufacturer, the performance of the microwave function and thermal heat should be measured as far as it is possible. This standard defines the main performance characteristics of these appliances which are of interest to the user and specifies methods for measuring these characteristics. This standard does not specify a classification or ranking for performance. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- new definitions for "set to off mode" and "set to standby mode" are included in Clause 3;
- reference to ISO 80000 regarding rounding;
- more exact determination of the mass of the appliances (6.2);
- update of the existing 7.3 in order to improve the clarity of procedure;
- additional temperature requirement in 7.4.3 to ensure an adequate temperature setting during the energy measurement process;
- editorial changes in 7.6.1.3, 7.6.2.1, 7.6.2.2 and 7.6.2.3;
- revision of Clause 8 in order to increase the repeatability for the measurements for steam ovens;
- Clause 12 "Standby power" is renamed to "Consumption measurement of low power modes" and the content is adapted for IEC 62301:2011;
- replacing the supplier for the colouring measurement device in Clause C.6, because the previous device is no longer available;
- adaptation of Annex A to the new supplier of colouring measurement devices;
- adaptation of Annex E;
- measurement method for measuring the consumption of the cooling down period is added in the informative, new Annex G;
- measurement method to check applied microwave energy during the measurement according to 7.4 is added in the informative Annex H;
- new Annex I for marking the temperature setting for checking the oven temperature.
The contents of the Interpretation Sheet 1 of March 2021 have been included in this copy.
- Standard227 pagesEnglish languagesale 15% off
- Standard307 pagesEnglish and French languagesale 15% off
- Standard20 pagesEnglish and French languagesale 15% off
- Standard4 pagesEnglish and French languagesale 15% off
IEC 61591:2019 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen.
It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation.
This document deals also with down-draft systems arranged beside, behind or under the cooking appliance.
This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics.
This document does not specify a classification or ranking for performance.
This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31.
This second edition cancels and replaces the first edition published in 1997, Amendment 1:2005 and Amendment 2:2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) new subclause about instruments and measurements (see 6.6);
b) new procedure for measuring the fluid dynamic efficiency (FDE), which follows the CENELEC proposal in principle;
c) revised procedure for determining the odour reduction for cooking fume extractors in recirculation mode (see Clause 12);
d) modification to the measurement of the effectiveness of the lighting system (see Clause 11);
e) clearer procedure to measure the grease absorption (see Clause 13);
- Standard57 pagesEnglish and French languagesale 15% off
IEC 60705:2010 applies to microwave ovens for household use. It also applies to combination microwave ovens. This standard defines the main performance characteristics of household microwave ovens which are of interest to the user, and it specifies methods for measuring these characteristics. This fourth edition cancels and replaces the third edition published in 1999, its amendment 1 (2004) and its amendment 2 (2006), and constitutes a technical revision. The main changes from the previous edition are as follows:
- the definition of rounding is given in 3.5;
- the usable volume and the overall volume are respectively determined in 7.2 and 7.3.
- Standard66 pagesEnglish and French languagesale 15% off
- Standard201 pagesEnglish and French languagesale 15% off
- Standard201 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.