iTeh Standards logo
EURUSD
Your shopping cart is empty.
IEC

ISO/IEC 14763-3:2014/COR1:2015

(Corrigendum)

Corrigendum 1 - Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling

Corrigendum 1 - Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling

This consolidated version consists of the second edition (1990), its amendment 1 (1997) and its amendment 2 (1997). Therefore, no   need to order amendments in addition to this publication.

General Information

Status
Published
Publication Date
22-Mar-2015
ICS
29.060.10 - Wires
35.200 - Interface and interconnection equipment
Technical Committee
ISO/IEC JTC 1/SC 25 - Interconnection of information technology equipment
Current Stage
DELPUB - Deleted Publication
Start Date
22-May-2024
Completion Date
26-Oct-2025
Ref Project

Relations

Corrects
ISO/IEC 14763-3:2014 - Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling
Effective Date
05-Sep-2023
Revised
ISO/IEC 14763-3:2024 - Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling
Effective Date
05-Sep-2023
ISO/IEC 14763-3:2014/COR1:2015 - Corrigendum 1 - Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling Released:3/23/2015ISO/IEC 14763-3:2014/COR1:2015 - Corrigendum 1 - Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling Released:3/23/2015
PreviousNext
Standard
ISO/IEC 14763-3:2014/COR1:2015 - Corrigendum 1 - Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling Released:3/23/2015
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2015
ISO/IEC 14763-3
Edition 2.0  2014-06
INFORMATION TECHNOLOGY – IMPLEMENTATION AND OPERATION
OF CUSTOMER PREMISES CABLING –

Part 3: Testing of optical fibre cabling

CO RRI G E NDUM 1
Table 4 – Connecting hardware attenuation

Replace, in the second row,
in column 4, "SMF, Attenuation (random mated)", the existing value "0,30 dB max.", by "0,25 dB max."
and
in column 5, "SMF, Attenuation (mated against reference)", the ex
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

IEC
ISO/IEC 29341-19-10:2011(Main)
Information technology - UPnP Device Architecture - Part 19-10: Solar Protection Blind Device Control Protocol - Two Way Motion Motor Service

ISO/IEC 29341-19-10:2011(E) describes the service definition which is compliant with the UPnP Device Architecture version 1.0. This service-type enables the following functions: - Driving a motor between two fixed end limits. - Reaching any position written in percentage of the full run (optional). - Returning the actual blind position written in percentage of the full run (optional).

  • Standard
    18 pages
    English language
    sale 15% off
IEC
ISO/IEC 29341-18-10:2011(Main)
Information technology - UPnP Device Architecture - Part 18-10: Remote Access Device Control Protocol - Remote Access Inbound Connection Configuration Service

ISO/IEC 29431-18-10:2011(E) describes a service definition which is compliant with the UPnP Device Architecture version 1.0. It defines a service type referred to herein as InboundConnectionConfig service. The InboundConnectionConfig service is a UPnP service that allows control points to configure the parameters that will enable the service to test if the host device is reachable from the internet. InboundConnectionConfig uses Dynamic DNS to manage at least one public address for home-network services; it uses STUN to ensure that any intermediate NAT device is navigatable, i.e. it is a full-cone NAT. Thus, this service provides control points with the following functionality: - Configure the dynamic DNS client co-located with the service, - Configure the STUN client co-located with the service, - Check if the device hosting the service is reachable from the internet.

  • Standard
    14 pages
    English language
    sale 15% off
IEC
ISO/IEC 29341-18-11:2011(Main)
Information technology - UPnP Device Architecture - Part 18-11: Remote Access Device Control Protocol - Remote Access Discovery Agent Service

ISO/IEC 29341-18-11:2011(E) covers service definition and is compliant with the UPnP Device Architecture version 1.0. It defines a service type referred to herein as RADAConfig service. This service type enables configuration of the in-band synchronization mechanism between Remote Access Clients and Remote Access Server.

  • Standard
    12 pages
    English language
    sale 15% off
IEC
ISO/IEC 29341-18-13:2011(Main)
Information technology - UPnP Device Architecture - Part 18-13: Remote Access Device Control Protocol - Remote Access Transport Agent Configuration Service

ISO/IEC 29341-18-13:2011(E) describes a service definition which is compliant with the UPnP Device Architecture version 1.0. It defines a service type referred to herein as RATAConfig service. The RATAConfig service is a UPnP service that allows control points to provision and configure the parameters that are required for enabling a Remote Access Server to accept and a Remote Access Client to initiate remote access connections. This service provides control points with the following functionality: - Determine the Remote Access Transport Agents that can be configured by the service. - Determine the delivery mechanisms for credentials supported by the service. - Configure Remote Access Transport Agent profiles. - Management of Remote Access Transport Agent profiles.

  • Standard
    44 pages
    English language
    sale 15% off
IEC
ISO/IEC 29341-16-1:2011(Main)
Information technology - UPnP Device Architecture - Part 16-1: Low Power Device Control Protocol - Low Power Architecture

ISO/IEC 29341-16-1:2011(E) defines an architecture that will address the issue of reporting and tracking power states of nodes in a network. The UPnP Low Power solution is designed to enable nodes in the network to report and track the Low Power states of other nodes in the network. Additionally, for nodes that support wake up capabilities, this architecture addresses methods to wake up those nodes when required. The objective of the UPnP Low Power solution is to allow UPnP devices to conserve energy and still be discoverable by UPnP Control Points. The UPnP Control Point will be aware of the UPnP devices and services implemented on a Low Power device even when the Low Power device is in a power savings mode. This architecture document defines two UPnP services that comprise the UPnP Low Power framework: Low Power device service and Basic Power Management Proxy service.

  • Standard
    35 pages
    English language
    sale 15% off
IEC
IEC TR 61169-1-8:2025(Main)
Radio-frequency connectors - Part 1-8: Electrical test methods - Voltage standing wave ratio for a single connector by double connector method

IEC TR 61169-1-8:2025 provides a test method for voltage standing wave ratio (VSWR, hereinafter) of single RF connector by double-connector method. This document is applicable to single RF cable connectors and single microstrip RF connectors as well as single adapters if an estimation of the VSWR of a single completely installed RF-connector is used and a time domain feature is not available on the vector network analyzer.

  • Technical report
    18 pages
    English language
    sale 15% off
IEC
IEC 62541-100:2025(Main)
OPC unified architecture - Part 100: Devices

IEC 62541-100:2025 defines the information model associated with Devices. This document describes three models which build upon each other as follows:
• The (base) Device Model is intended to provide a unified view of devices and their hardware and software parts irrespective of the underlying device protocols.
• The Device Communication Model adds Network and Connection information elements so that communication topologies can be created.
• The Device Integration Host Model finally adds additional elements and rules required for host systems to manage integration for a complete system. It enables reflecting the topology of the automation system with the devices as well as the connecting communication networks.
This document also defines AddIns that can be used for the models in this document but also for models in other information models. They are:
• Locking model – a generic AddIn to control concurrent access,
• Software update model – an AddIn to manage software in a Device.
This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a a ComponentType that can be used to model any HW or SW element of a device has been defined and a SoftwareType has been added as subtype of ComponentType;
b the new OPC UA interface concept and defined interfaces for Nameplate, DeviceHealth, and SupportInfo has been added.
c) a new model for Software Update (Firmware Update) has been added;
d) a new entry point for documents where each document is represented by a FileType instance has been specified;
e) a model that provides information about the lifetime, related limits and semantic of the lifetime of things like tools, material or machines has been added.

  • Standard
    152 pages
    English language
    sale 15% off
  • Standard
    158 pages
    French language
    sale 15% off
  • Standard
    310 pages
    English and French language
    sale 15% off
IEC
IEC TS 62876-3-4:2025(Main)
Nanomanufacturing - Reliability assessment - Part 3-4: Linearity of output characteristics for metal contacted 2D semiconductor devices

IEC TS 62876-3-4:2025, which is a Technical Specification, establishes a standardized guideline to assess
• reliability of metallic interfaces
of Ohmic-contacted field-effect transistors (FETs) using 2D nano-materials by quantifying
• linearity of current-voltage (I-V) output curves
for devices with various materials combinations of van der Waals (vdW) interfaces.
For metallic interfaces with 2D materials (eg. graphene, MoS2, MoTe2, WS2, WSe2, etc) and metals (eg. Ti, Cr, Au, Pd, In, Sb, etc), the reliability of Ohmic contact is quantified.
For FETs consisting of 2D materials-based channels (eg. MoS2, MoTe2, WS2, WSe2, etc), the reliability of Ohmic contact when varying contacting metal, channel length, channel thickness, applied voltage, and surface treatment condition is quantified.
The reliability of the metallic contacts is quantified from the linearity of I-V characteristics measured over extended time periods.

  • Technical specification
    24 pages
    English language
    sale 15% off
IEC
IEC 63522-4:2025(Main)
Electrical relays - Tests and measurements - Part 4: Dielectric strength test

IEC 63522-4:2025 is used for testing along with the appropriate severities and conditions for measurements and tests designed to assess the ability of DUTs to perform under expected conditions of transportation, storage and all aspects of operational use.
The object of this test is to define a standard test method for the dielectric strength test.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Standard
    20 pages
    English and French language
    sale 15% off
IEC
IEC TS 63414:2025(Main)
Artificial pollution tests on high-voltage polymeric insulators to be used on AC and DC systems

IEC TS 63414:2025 is applicable for the determination of the AC and DC pollution flashover and withstand voltage characteristics of insulators with polymeric housing, to be used outdoors in HV applications and exposed to polluted environments. This is also applicable for insulators with hydrophobic coatings. This document refers to AC systems with a rated voltage greater than 1 000 V and DC systems with a rated voltage greater than 1 500 V.
The object of this technical specification is to prescribe standardized test methods, requirements and procedures for artificial pollution tests applicable to polymeric insulators for overhead lines including traction lines, station post and hollow insulators of equipment. Available test experience with polymeric station post and hollow insulators, especially for DC applications, is limited.
The proposed tests are not applicable to ceramic and glass insulators without polymeric housing, to greased insulators or to special types of insulators (e.g., insulators with semiconducting glaze).
Differently to ceramic and glass insulators without polymeric housing:
- The pollution performance of insulators with polymeric housing varies with the hydrophobicity condition of the surface. The specific conditions simulated by standardized tests might not represent the actual dynamic field conditions.
- The determination of the flashover and/or withstand voltage under pollution conditions is not enough for dimensioning. Additional constraints related to possible ageing are also to be considered.
- If the Hydrophobicity Transfer Material (HTM) test according to IEC TR 62039 confirms that an insulator is non-HTM, it can be tested according to IEC 60507 or IEC TS 61245.

  • Technical specification
    39 pages
    English language
    sale 15% off