IEC 63056:2020/COR1:2021
(Corrigendum)Corrigendum 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems
Corrigendum 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems
Corrigendum 1 - Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Exigences de sécurité pour les accumulateurs au lithium pour utilisation dans des systèmes de stockage d’énergie électrique
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 63056 IEC 63056
Edition 1.0 2020-03 Édition 1.0 2020-03
Secondary cells and batteries containing Accumulateurs alcalins et autres accumulateurs
alkaline or other non-acid electrolytes – Safety à électrolyte non acide – Exigences de sécurité
requirements for secondary lithium cells and pour les accumulateurs au lithium pour
batteries for use in electrical energy storage utilisation dans des systèmes de stockage
systems d'énergie électrique
CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.
5.3 The peak voltage of charging
Replace "battery system manufacturer" with "cell manufacturer" at the end of the existing
paragraph, as follows:
"When a charging current has an alternating component, a battery system manufacturer shall
ensure that the peak voltage of the charging current is under the upper limit charging voltage,
specified by the cell manufacturer, by monitoring the voltage of every single cell or cell block."
Replace the existing Table 1 with the following new Table 1:
Table 1 – Type test
Test items DUT
7.2 Resistance to abnormal heat minimum of 1
7.6 Protection for short circuit during transport and installation minimum of 1
7.4 Electric insulati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.