Amendment 2 - Safety of household and similar electrical appliances - Part 2-38: Particular requirements for commercial electric griddles and griddle grills

General Information

Status
Published
Publication Date
09-Nov-1998
Current Stage
DELPUB - Deleted Publication
Completion Date
09-Mar-2000
Ref Project

Relations

Buy Standard

Standard
IEC 60335-2-38:1994/AMD2:1998 - Amendment 2 - Safety of household and similar electrical appliances - Part 2-38: Particular requirements for commercial electric griddles and griddle grills Released:11/10/1998 Isbn:2831845947
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL
IEC
STANDARD
60335-2-38
AMENDMENT 2
1998-11
Amendment 2
Safety of household and similar electrical
appliances –
Part 2-38:
Particular requirements for commercial electric
griddles and griddle grills
Amendement 2
Sécurité des appareils electrodomestiques et analogues –
Partie 2-38:
Règles particulières pour les plaques à griller électriques
à usage collectif
 IEC 1998  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
D
International Electrotechnical Commission
For price, see current catalogue

– 2 – 60335-2-38 amend. 2 © IEC:1998(E)

FOREWORD
This amendment has been prepared by subcommittee 61E: Safety of electrical commercial

catering equipment, of IEC technical committee 61: Safety of household and similar electrical

appliances.
The text of this amendment is based on the following documents:

FDIS Report on voting
61E/276/FDIS 61E/294/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
___________
Page 9
2 Definitions
Add, on page 11, the following new definition:
2.2.104 heating unit: Any part of the appliance which fulfils an independent cooking or
heating function.
Page 13
7 Marking and instructions
Add the following text:
7.12.4 Addition:
The instructions for built-in appliances having a separate control panel for several appliances
shall state that the control panel is only to be connected to the specified appliances in order to
avoid a possible hazard.
Add the following text:
7.15 Addition:
When it is not practical to place the marking of fixed appliances so that it is visible after the
appliance has been installed, the relevant information shall also be included in the instructions
for use or on an additional label which can be fixed near the appliance after installation.
NOTE - An example of such a fixed appliance is a built-in appliance.

60335-2-38 amend. 2  IEC:1998(E) – 3 –

Page 21
13 Leakage current and electric strength at operating temperature

13.2 Add the following to the modification:

For heating units with surfaces of glass-ceramic or similar material, a flat metal plate, 200 mm
by 100 mm and 2 mm thick is used in place of the metal foil. The concavity of the major
dimension of the plate shall not exceed 0,1 mm.

The plate is put in any position on the surface for a period of 1 min before the leakage current
is measured.
Add the following to the addition:
If there is earthed metal between live parts and the surface of glass-ceramic or similar
material, the leakage current is measured for each of the heating units in turn, with the flat
metal plate connected to earthed metal.
The leakage current shall not exceed 1 mA per kW of the power input of the heati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.