Electronic displays - Part 2-1: Measurements of optical characteristics - Fundamental measurements

IEC 62977-2-1:2021(E) specifies standard measurement conditions and measuring methods for determining the optical characteristics of electronic display modules and systems. These methods apply to emissive and transmissive direct view displays that render real 2D images on a flat panel. This document evaluates the optical characteristics of these displays under darkroom conditions. This document applies to the testing of display performance in response to standard analogue or digital input signals that are not absolute luminance encoded. The input signal is relative RGB without metadata information that codes for real luminance, colour space or colour coordinates. These methods are limited to input signals with typical OETFs such as defined in IEC 61966-2-1, ITU BT. Rec. 601, ITU BT. Rec.709, and ITU BT. Rec.2020. The tests in this document are not approved for use with HDR input signals.
NOTE A flat panel or flat panel display is a display with a flat surface and minimal depth that emits visible light from the surface. The display is subdivided into an array of electronically driven pixels which can be light valves modulating a backlight, or self-luminous. Emissive/transmissive/reflective hybrid displays can be flat panel or flat panel displays.

General Information

Status
Published
Publication Date
04-Jan-2021
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
25-Jan-2021
Completion Date
05-Jan-2021
Ref Project

Buy Standard

Standard
IEC 62977-2-1:2021 - Electronic displays - Part 2-1: Measurements of optical characteristics - Fundamental measurements
English language
82 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 62977-2-1 ®
Edition 1.0 2021-01
INTERNATIONAL
STANDARD
colour
inside
Electronic displays –
Part 2-1: Measurements of optical characteristics – Fundamental measurements

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62977-2-1 ®
Edition 1.0 2021-01
INTERNATIONAL
STANDARD
colour
inside
Electronic displays –
Part 2-1: Measurements of optical characteristics – Fundamental measurements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.120; 31.260 ISBN 978-2-8322-9225-9

– 2 – IEC 62977-2-1:2021 © IEC 2021
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviated terms . 10
3.1 Terms and definitions . 10
3.2 Abbreviated terms . 11
4 General . 11
4.1 Measured basic quantities . 11
4.2 Electrical driving of the display (depending on the nature of the display) . 11
4.3 Data acquisition timing and display driving . 12
4.3.1 Stationary measurements . 12
4.3.2 Properties of display under test . 12
5 Standard measuring conditions . 12
5.1 Standard measuring environmental conditions . 12
5.2 Standard measuring darkroom conditions . 12
5.3 Standard setup conditions . 12
5.3.1 General . 12
5.3.2 Adjustment of display . 12
5.3.3 Starting conditions of measurements . 13
5.3.4 Conditions of measuring equipment . 13
5.4 Location of measurement field . 15
5.5 Standard test patterns . 16
5.6 Viewing direction coordinate system . 16
6 Simple box optical measurement methods . 17
6.1 General . 17
6.2 Test patterns. 17
6.3 Luminance . 18
6.3.1 Purpose . 18
6.3.2 Measuring conditions . 18
6.3.3 Measuring method . 18
6.4 Darkroom contrast ratio . 19
6.4.1 Purpose . 19
6.4.2 Measuring conditions . 19
6.4.3 Measuring method . 19
6.5 Luminance uniformity . 20
6.5.1 Purpose . 20
6.5.2 Measuring conditions . 20
6.5.3 Measuring method . 20
6.6 Chromaticity . 21
6.6.1 Purpose . 21
6.6.2 Measuring conditions . 21
6.6.3 Measuring method . 22
6.7 White chromaticity and correlated colour temperature . 22
6.7.1 Purpose . 22
6.7.2 Measuring conditions . 22

6.7.3 Measuring method . 22
6.8 Chromaticity non-uniformity . 23
6.8.1 Purpose . 23
6.8.2 Measuring conditions . 23
6.8.3 Measuring method . 23
6.9 Chromaticity/colour gamut area. 24
6.9.1 Purpose . 24
6.9.2 Measuring conditions . 24
6.9.3 Measuring method . 25
6.9.4 Chromaticity/colour gamut area in CIE 1931 and CIE 1976 chromaticity
diagram . 27
6.10 Luminance and colour variation with viewing direction . 28
6.10.1 Purpose . 28
6.10.2 Measuring conditions . 28
6.10.3 Measuring method . 28
7 Display multi-colour optical measuring methods . 30
7.1 General . 30
7.2 Test patterns. 30
7.3 Luminance . 33
7.3.1 Purpose . 33
7.3.2 Measuring conditions . 33
7.3.3 Measuring method . 34
7.4 Darkroom contrast ratio . 35
7.4.1 Purpose . 35
7.4.2 Measuring conditions . 35
7.4.3 Measuring method . 35
7.5 Luminance uniformity . 35
7.6 Chromaticity, tristimulus values, and spectra . 35
7.6.1 Purpose . 35
7.6.2 Measuring conditions . 36
7.6.3 Measuring method . 36
7.7 White chromaticity and correlated colour temperature . 36
7.7.1 Purpose . 36
7.7.2 Measuring conditions . 36
7.7.3 Measuring method . 36
7.8 Chromaticity/colour gamut area. 37
7.8.1 Purpose . 37
7.8.2 Measuring conditions . 37
7.8.3 Measuring method . 37
7.8.4 Chromaticity/colour gamut area in CIE 1931 and CIE 1976 chromaticity
diagram . 37
7.9 Chromaticity non-uniformity . 38
7.10 Luminance and colour variation with viewing direction . 38
7.10.1 Purpose . 38
7.10.2 Measuring conditions . 38
7.10.3 Measuring method . 38
8 CIELAB colour gamut volume . 39
8.1 Purpose . 39
8.2 Measuring conditions . 40

– 4 – IEC 62977-2-1:2021 © IEC 2021
8.3 Measuring method . 40
Annex A (normative) RGB boundary colours for CIE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.