IEC TS 62351-100-3:2020

IEC TS 62351-100-3 ®
Edition 1.0 2020-01
TECHNICAL
SPECIFICATION
colour
inside
Power systems management and associated information exchange – Data and
communications security –
Part 100-3: Conformance test cases for IEC 62351-3, the secure communication
extension for profiles including TCP/IP
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
IEC TS 62351-100-3 ®
Edition 1.0 2020-01
TECHNICAL
SPECIFICATION
colour
inside
Power systems management and associated information exchange – Data and

communications security –
Part 100-3: Conformance test cases for IEC 62351-3, the secure communication

extension for profiles including TCP/IP

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.200 ISBN 978-2-8322-7644-0

– 2 – IEC TS 62351-100-3:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 8
4 General . 8
4.1 Normatives covered by this document . 8
4.2 Conformance testing structure . 9
4.2.1 General . 9
4.2.2 Conformance testing addressed per station type . 9
4.2.3 Normal procedure tests and resiliency tests . 9
4.3 Conformance testing requirements . 10
4.3.1 Testing within the context of an application . 10
4.3.2 Requirements for the device under test. 10
4.3.3 Requirements for the test facility . 10
4.3.4 Test logging . 11
5 Verification of Configuration parameters . 12
5.1 General . 12
5.2 Configuration parameters . 12
6 Verification of IEC 62351-3 requirements. 14
6.1 General . 14
6.2 Normal procedure test cases . 14
6.3 Resiliency test cases . 17
7 Tests Results Chart . 22
7.1 Verification of Configuration Parameters . 22
7.2 Verification of IEC 62351-3 requirements . 23

Table 1 – Configuration Parameters . 12
Table 2 – IEC 62351-3 requirements: Normal procedure tests . 14
Table 3 – IEC 62351-3 requirements: Resiliency tests . 17
Table 4 – Test results chart: Verification of configuration parameters . 22
Table 5 – Test results chart: Verification of IEC 62351-3 requirements . 23

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWER SYSTEMS MANAGEMENT AND ASSOCIATED INFORMATION
EXCHANGE – DATA AND COMMUNICATIONS SECURITY –

Part 100-3: Conformance test cases for IEC 62351-3, the secure
communication extension for profiles including TCP/IP

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In
exceptional circumstances, a technical committee may propose the publication of a technical
specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC TS 62351-100-3, which is a technical specification, has been prepared by IEC technical
committee 57: Power systems management and associated information exchange.

– 4 – IEC TS 62351-100-3:2020 © IEC 2020
The text of this technical specification is based on the following documents:
Enquiry draft Report on voting
57/2090/DTS 57/2130/RVDTS
Full information on the voting for the approval of this technical specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This document is to be read in conjunction with IEC 62351-3:2014, IEC 62351-3/AMD1:2018
and IEC 62351-3/AMD2:2020.
A list of all parts in the IEC 62351 series, published under the general title Power systems
management and associated information exchange – Data and communications security, can
be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
INTRODUCTION
This technical specification describes test cases for conformance testing of telecontrol
equipment or systems integrating the IEC 62351-3 security extension for profiles including
TCP/IP.
– 6 – IEC TS 62351-100-3:2020 © IEC 2020
POWER SYSTEMS MANAGEMENT AND ASSOCIATED INFORMATION
EXCHANGE – DATA AND COMMUNICATIONS SECURITY –

Part 100-3: Conformance test cases for IEC 62351-3, the secure
communication extension for profiles including TCP/IP

1 Scope
This part of IEC 62351, which is a technical specification, describes test cases of data and
communication security for telecontrol equipment, Substation Automation Systems [SAS] and
telecontrol systems, including front-end functions of SCADA.
The goal of this document is to enable interoperability by providing a standard method of
testing protocol implementations to verify that a device fulfils the requirement of IEC 62351-3.
Note that conformity to IEC 62351-3 does not guarantee interoperability between devices
using different implementations. It is expected that using this specification during testing will
minimize the risk of non-interoperability. A basic condition for this interoperability is a passed
conformance test of both devices.
The scope of this document is the specification of common available procedures and
definitions for conformance and/or interoperability testi
...