IEC 61347-1:2015
(Main)Lamp controlgear - Part 1: General and safety requirements
Lamp controlgear - Part 1: General and safety requirements
IEC 61347-1:2015 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 250 V and/or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz. This third edition cancels and replaces the second edition published in 2007, Amendment 1:2010 and Amendment 2:2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) additional marking requirements;
b) additional requirements for creepage distances and clearances:
- for working voltages with operating frequencies up to 30 kHz;
- for working voltages with higher operating frequencies than 30 kHz;
- for impulse and resonance voltages ignition;
- for basic, supplementary and reinforced insulation;
- for insulation between circuits;
- for coated or potted controlgear;
c) modification of definition of ELV and FELV;
d) modification of schematic drawing, showing the different controlgear classification and insulation requirements;
e) scope extension;
f) new Annex A: test to establish whether a conductive part is a live part which may cause an electric shock;
g) new Annex M: creepage distances and clearances for controlgear where a higher degree of availability (impulse withstand category III) may be requested;
h) new Annex Q: example for Up calculation;
i) new Annex P: creepage distances and clearances and distance through isolation (DTI) for lamp controlgear which are protected against pollution by the use of coating or potting;
j) new Annex R: concept of creepage distances and clearances.
This publication is to be read in conjunction with theIEC 61347-2 series
Appareillages de lampes - Partie 1: Exigences générales et exigences de sécurité
IEC 61347-1:2015 spécifie les exigences générales et les exigences de sécurité pour les appareillages de lampes destinés à être utilisés sur des alimentations à courant continu jusqu'à 250 V et/ou sur des alimentations à courant alternatif jusqu'à 1 000 V à 50 Hz ou 60 Hz. Cette troisième édition annule et remplace la deuxième édition parue en 2007, l'Amendement 1:2010 et l'Amendement 2:2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) les exigences de marquage supplémentaires;
b) des exigences supplémentaires pour les lignes de fuite et écartements:
- pour des tensions de service avec des fréquences de fonctionnement jusqu'à 30 kHz;
- pour des tensions de service avec des fréquences de fonctionnement supérieures à 30 kHz;
- pour impulsion et la résonance des tensions d'allumage;
- pour l'isolation de base, supplémentaire et renforcée;
- pour l'isolation entre les circuits;
- pour l'appareillage enduit ou en pot;
c) modification de la définition d'ELV et de FELV;
d) la modification du schéma, montrant les différentes exigences en matière de classification et d'isolation appareillage;
e) extension de l'objet;
f) la nouvelle Annexe A: essai pour déterminer si une partie conductrice est une partie active qui peut provoquer un choc électrique;
g) la nouvelle Annexe M: les lignes de fuite et écartements pour l'appareillage où un plus haut degré de disponibilité (tenue aux chocs de catégorie III) peut être demandée;
h) la nouvelle Annexe Q: exemple de calcul Up;
i) la nouvelle Annexe P: les distances des lignes de fuite l'écartement et la distance à travers l'isolation (DTI) pour les appareillages de lampes qui sont protégés contre la pollution par l'utilisation d'un revêtement ou d'enrobage;
j) la nouvelle Annexe R: concept de lignes de fuite et écartements.
Cette publication doit être lue conjointement avec la série CEI 61347-2.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61347-1 ®
Edition 3.0 2015-02
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Lamp controlgear –
Part 1: General and safety requirements
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 61347-1 ®
Edition 3.0 2015-02
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Lamp controlgear –
Part 1: General and safety requirements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.140.99 ISBN 978-2-8322-2289-8
– 2 – IEC 61347-1:2015 RLV © IEC 2015
CONTENTS
FOREWORD. 9
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms and definitions . 15
4 General requirements . 23
5 General notes on tests . 24
6 Classification . 25
7 Marking . 25
7.1 Items to be marked . 25
7.2 Durability and legibility of marking . 27
8 Terminals . 28
9 Provisions for protective earthing Earthing . 28
9.1 Provisions for protective earthing (Symbol: IEC 60417-5019 (2006-08)). 28
9.2 Provisions for functional earthing (Symbol: IEC 60417-5018 (201 1-07)) . 28
9.3 Lamp controlgear with conductors for protective earthing by tracks on
printed circuit boards . 28
9.4 Earthing of built-in lamp controlgear . 29
9.5 Earthing via independent controlgear . 29
9.5.1 Earth connection to other equipment . 29
9.5.2 Earthing of the lamp compartments powered via the independent lamp
controlgear . 29
10 Protection against accidental contact with live parts . 30
11 Moisture resistance and insulation . 31
12 Electric strength . 32
13 Thermal endurance test for windings of ballasts . 33
14 Fault conditions . 36
15 Construction . 41
15.1 Wood, cotton, silk, paper and similar fibrous material . 41
15.2 Printed circuits . 41
15.3 Plugs and socket-outlets used in SELV or ELV circuits . 41
15.4 Insulation between circuits and accessible parts . 41
15.4.1 General . 41
15.4.2 SELV circuits . 42
15.4.3 FELV circuits . 42
15.4.4 Other circuits . 43
15.4.5 Insulation between circuits and accessible conductive parts . 43
16 Creepage distances and clearances . 45
16.1 General . 45
16.2 Creepage distances . 49
16.2.1 General . 49
16.2.2 Minimum creepage distances for working voltages . 50
16.2.3 Creepage distances for working voltages with frequencies above
30 kHz . 50
16.2.4 Compliance with the required creepage distances . 51
16.3 Clearances . 52
16.3.1 General . 52
16.3.2 Clearances for working voltages . 53
16.3.3 Clearances for ignition voltages and working voltages with higher
frequencies . 54
16.3.4 Compliance with the required clearances . 56
17 Screws, current-carrying parts and connections . 57
18 Resistance to heat, fire and tracking . 57
19 Resistance to corrosion . 58
20 No-load output voltage . 58
Annex A (normative) Test to establish whether a conductive part is a live part which
may cause an electric shock . 59
A.1 General test requirements . 59
A.2 Limits for measured voltages . 59
A.3 Limits for touch current . 60
Annex B (normative) Particular requirements for thermally protected lamp
controlgear . . 61
B.1 Introductory remark . 61
B.2 General . 61
B.3 Terms and definitions . 61
B.4 General requirements for thermally protected lamp controlgear . 62
B.5 General notes on tests . 62
B.6 Classification . 62
B.6.1 General . 62
B.6.2 According to the class of protection . 62
B.6.3 According to the type of protection . 63
B.7 Marking . 63
B.8 Thermal endurance of windings . 63
B.9 Lamp controlgear heating . 63
B.9.1 Preselection test . 63
B.9.2 "Class P" thermally protected lamp controlgear . 64
B.9.3 Temperature declared thermally protected lamp controlgear as specified
in IEC 61347-2-8, with a rated maximum case temperature of 130 °C or
lower . 65
B.9.4 Temperature declared thermally protected lamp controlgear as specified
in IEC 61347-2-8 with a rated maximum case temperature exceeding
130 °C . 66
B.9.5 Temperature declared thermally protected lamp controlgear as specified
in IEC 61347-2-9 . 67
Annex C (normative) Particular requirements for electronic lamp controlgear with
means of protection against overheating . 70
C.1 General . 70
C.2 Terms and definitions . 70
C.3 General requirements for electronic lamp controlgear with means of
protection against overheating . 70
C.4 General notes on tests . 71
C.5 Classification . 71
C.6 Marking . 71
C.7 Limitation of heating . 71
C.7.1 Pre-selection test . 71
– 4 – IEC 61347-1:2015 RLV © IEC 2015
C.7.2 Functioning of the protection means . 71
Annex D
...
IEC 61347-1 ®
Edition 3.0 2015-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 1: General and safety requirements
Appareillages de lampes –
Partie 1: Exigences générales et exigences de sécurité
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 60 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des
CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61347-1 ®
Edition 3.0 2015-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 1: General and safety requirements
Appareillages de lampes –
Partie 1: Exigences générales et exigences de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-2243-0
– 2 – IEC 61347-1:2015 © IEC 2015
CONTENTS
FOREWORD . 9
INTRODUCTION . 11
1 Scope . 12
2 Normative references . 12
3 Terms and definitions . 14
4 General requirements . 22
5 General notes on tests . 22
6 Classification . 23
7 Marking . 24
7.1 Items to be marked . 24
7.2 Durability and legibility of marking. 26
8 Terminals . 26
9 Earthing . 26
9.1 Provisions for protective earthing (Symbol: IEC 60417-5019 (2006-08)) . 26
9.2 Provisions for functional earthing (Symbol: IEC 60417-5018 (2011-07)) . 27
9.3 Lamp controlgear with conductors for protective earthing by tracks on
printed circuit boards . 27
9.4 Earthing of built-in lamp controlgear. 27
9.5 Earthing via independent controlgear . 27
9.5.1 Earth connection to other equipment . 27
9.5.2 Earthing of the lamp compartments powered via the independent lamp
controlgear . 28
10 Protection against accidental contact with live parts . 28
11 Moisture resistance and insulation . 29
12 Electric strength . 30
13 Thermal endurance test for windings of ballasts . 31
14 Fault conditions . 35
15 Construction . 39
15.1 Wood, cotton, silk, paper and similar fibrous material . 39
15.2 Printed circuits . 39
15.3 Plugs and socket-outlets used in SELV or ELV circuits . 39
15.4 Insulation between circuits and accessible parts . 39
15.4.1 General . 39
15.4.2 SELV circuits . 40
15.4.3 FELV circuits . 40
15.4.4 Other circuits . 41
15.4.5 Insulation between circuits and accessible conductive parts . 41
16 Creepage distances and clearances . 43
16.1 General . 43
16.2 Creepage distances . 45
16.2.1 General . 45
16.2.2 Minimum creepage distances for working voltages . 46
16.2.3 Creepage distances for working voltages with frequencies above
30 kHz . 46
16.2.4 Compliance with the required creepage distances . 47
16.3 Clearances . 48
16.3.1 General . 48
16.3.2 Clearances for working voltages . 49
16.3.3 Clearances for ignition voltages and working voltages with higher
frequencies . 50
16.3.4 Compliance with the required clearances . 52
17 Screws, current-carrying parts and connections . 53
18 Resistance to heat, fire and tracking . 53
19 Resistance to corrosion . 54
20 No-load output voltage . 54
Annex A (normative) Test to establish whether a conductive part is a live part which
may cause an electric shock . 55
A.1 General test requirements . 55
A.2 Limits for measured voltages . 55
A.3 Limits for touch current . 55
Annex B (normative) Particular requirements for thermally protected lamp
controlgear . 56
B.1 Introductory remark . 56
B.2 General . 56
B.3 Terms and definitions. 56
B.4 General requirements for thermally protected lamp controlgear. 57
B.5 General notes on tests . 57
B.6 Classification . 57
B.6.1 General . 57
B.6.2 According to the class of prot
...
IEC 61347-1 ®
Edition 3.1 2017-09
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 1: General and safety requirements
Appareillages de lampes –
Partie 1: Exigences générales et exigences de sécurité
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC
65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte,
et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les
publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées.
antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Restez informé sur les nouvelles publications IEC. Just Service Clients - webstore.iec.ch/csc
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61347-1 ®
Edition 3.1 2017-09
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 1: General and safety requirements
Appareillages de lampes –
Partie 1: Exigences générales et exigences de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-4852-2
IEC 61347-1 ®
Edition 3.1 2017-09
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Lamp controlgear –
Part 1: General and safety requirements
Appareillages de lampes –
Partie 1: Exigences générales et exigences de sécurité
– 2 – IEC 61347-1:2015+AMD1:2017 CSV
© IEC 2017
CONTENTS
FOREWORD . 9
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms and definitions . 15
4 General requirements . 23
5 General notes on tests . 24
6 Classification . 25
7 Marking . 25
7.1 Items to be marked . 25
7.2 Durability and legibility of marking. 28
8 Terminals . 28
8.1 Integral terminals . 28
8.2 Terminals other than integral terminals . 28
9 Earthing . 29
9.1 Provisions for protective earthing (Symbol: IEC 60417-5019 (2006-08)) . 29
9.2 Provisions for functional earthing (Symbol: IEC 60417-5018 (2011-07)) . 29
9.3 Lamp controlgear with conductors for protective earthing by tracks on
printed circuit boards . 29
9.4 Earthing of built-in lamp controlgear. 29
9.5 Earthing via independent controlgear . 29
9.5.1 Earth connection to other equipment . 29
9.5.2 Earthing of the lamp compartments powered via the independent lamp
controlgear . 30
10 Protection against accidental contact with live parts . 30
11 Moisture resistance and insulation . 32
12 Electric strength . 32
13 Thermal endurance test for windings of ballasts . 33
14 Fault conditions . 37
15 Construction . 41
15.1 Wood, cotton, silk, paper and similar fibrous material . 41
15.2 Printed circuits . 41
15.3 Plugs and socket-outlets used in SELV or ELV circuits . 42
15.4 Insulation between circuits and accessible parts . 42
15.4.1 General . 42
15.4.2 SELV circuits . 42
15.4.3 FELV circuits . 43
15.4.4 Other circuits . 44
15.4.5 Insulation between circuits and accessible conductive parts . 44
16 Creepage distances and clearances . 45
16.1 General . 45
16.2 Creepage distances . 47
16.2.1 General . 47
16.2.2 Minimum creepage distances for working voltages . 49
© IEC 2017
16.2.3 Creepage distances for working voltages with frequencies above
30 kHz . 50
16.2.4 Compliance with the required creepage distances . 51
16.3 Clearances . 52
16.3.1 General . 52
16.3.2 Clearances for working voltages . 53
16.3.3 Clearances for ignition voltages and working voltages with higher
frequencies . 54
16.3.4 Compliance with the required clearances . 56
17 Screws, current-carrying parts and connections . 57
18 Resistance to heat, fire and tracking . 57
19 Resistance to corrosion . 58
20 No-load output voltage . 58
Annex A (normative) Test to establish whether a conductive part is a live part which
may cause an electric shock . 59
A.1 General test requirements . 59
A.2 Limits for measured voltages . 59
A.3 Limits for touch current . 59
Annex B (normative) Particular requirements for thermally protected lamp
controlgear . 60
B.1 Introductory remark .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.