IEC 60669-2-1:2021/COR1:2024
(Corrigendum)Corrigendum 1 - Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
Corrigendum 1 - Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
IEC 60669-2-1:2021 applies to electronic control devices, a general term to cover electronic switches, home and building electronic systems (HBES) / building automation and control systems (BACS) switches and electronic extension units.
It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors.
It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC, such as sensors and push buttons.
This document also applies to electronic remote control switches (RCS) and electronic time delay switches (TDS). Particular requirements are given in Annex FF.
This fifth edition cancels and replaces the fourth edition published in 2002, Amendment 1:2008 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) incorporation of the requirements for HBES switches, previously included in IEC 60669-2-5;
b) modification of 19.106, test and requirements for switches for LEDs;
c) general indication to cover electronic control devices;
d) test for looping through.
Corrigendum 1 - Interrupteurs pour installations électriques fixes domestiques et analogues - Partie 2-1: Exigences particulières - Dispositifs de commande électronique
l’IEC 60669-2-1:2021 s’applique aux dispositifs de commande électronique, c’est-à-dire un terme général qui englobe les interrupteurs électroniques, les interrupteurs des systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) / systèmes de gestion technique des bâtiments (SGTB) et les éléments électroniques périphériques.
Elle s’applique aux interrupteurs électroniques et aux interrupteurs HBES/SGTB, pour courant alternatif seulement, de tension de coupure assignée ne dépassant pas 250 V et de courant assigné ne dépassant pas 16 A, prévus pour des installations électriques fixes domestiques et analogues, intérieures ou extérieures.
Elle s’applique également aux éléments électroniques périphériques dont la tension d’alimentation assignée ne dépasse pas 250 V en courant alternatif et 120 V en courant continu, comme les capteurs et les boutons-poussoirs.
Le présent document s’applique également aux télérupteurs électroniques et aux minuteries électroniques. Des exigences particulières sont données dans l’Annexe FF.
Cette cinquième édition annule et remplace la quatrième édition parue en 2002,
l'Amendement 1:2008 et l'Amendement 2:2015. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) intégration des exigences relatives aux interrupteurs HBES, précédemment incluses dans la norme IEC 60669-2-5;
b) modification de 19.106, essais et exigences pour les interrupteurs pour LED;
c) indications générales pour couvrir les dispositifs de commande électronique;
d) essai de boucle.
General Information
- Status
- Published
- Publication Date
- 13-May-2024
- Technical Committee
- SC 23B - Plugs, socket-outlets and switches
- Drafting Committee
- MT 6 - TC 23/SC 23B/MT 6
- Current Stage
- PPUB - Publication issued
- Start Date
- 14-May-2024
- Completion Date
- 02-Jul-2024
Relations
- Effective Date
- 12-Apr-2024
Get Certified
Connect with accredited certification bodies for this standard
Intertek Testing Services NA Inc.
Intertek certification services in North America.
UL Solutions
Global safety science company with testing, inspection and certification.
ANCE
Mexican certification and testing association.
Sponsored listings
Frequently Asked Questions
IEC 60669-2-1:2021/COR1:2024 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Corrigendum 1 - Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices". This standard covers: IEC 60669-2-1:2021 applies to electronic control devices, a general term to cover electronic switches, home and building electronic systems (HBES) / building automation and control systems (BACS) switches and electronic extension units. It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors. It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC, such as sensors and push buttons. This document also applies to electronic remote control switches (RCS) and electronic time delay switches (TDS). Particular requirements are given in Annex FF. This fifth edition cancels and replaces the fourth edition published in 2002, Amendment 1:2008 and Amendment 2:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) incorporation of the requirements for HBES switches, previously included in IEC 60669-2-5; b) modification of 19.106, test and requirements for switches for LEDs; c) general indication to cover electronic control devices; d) test for looping through.
IEC 60669-2-1:2021 applies to electronic control devices, a general term to cover electronic switches, home and building electronic systems (HBES) / building automation and control systems (BACS) switches and electronic extension units. It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors. It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC, such as sensors and push buttons. This document also applies to electronic remote control switches (RCS) and electronic time delay switches (TDS). Particular requirements are given in Annex FF. This fifth edition cancels and replaces the fourth edition published in 2002, Amendment 1:2008 and Amendment 2:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) incorporation of the requirements for HBES switches, previously included in IEC 60669-2-5; b) modification of 19.106, test and requirements for switches for LEDs; c) general indication to cover electronic control devices; d) test for looping through.
IEC 60669-2-1:2021/COR1:2024 is classified under the following ICS (International Classification for Standards) categories: 29.120.40 - Switches. The ICS classification helps identify the subject area and facilitates finding related standards.
IEC 60669-2-1:2021/COR1:2024 has the following relationships with other standards: It is inter standard links to IEC 60669-2-1:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
IEC 60669-2-1:2021/COR1:2024 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 60669-2-1 IEC 60669-2-1
Edition 5.0 2021-02 Édition 5.0 2021-02
SWITCHES FOR HOUSEHOLD AND SIMILAR INTERRUPTEURS POUR INSTALLATIONS
FIXED ELECTRICAL INSTALLATIONS – ÉLECTRIQUES FIXES DOMESTIQUES ET
ANALOGUES –
Part 2-1: Particular requirements – Electronic
control devices Partie 2-1: Exigences particulières –
Dispositifs de comma
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...