Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides

IEC 60153-4:2022 specifies straight hollow metallic tubing of circular cross section for use as waveguides in electronic equipment. The aim of this document is to specify the hollow metallic waveguides:
a) the details necessary to ensure compatibility and, as far as essential, interchangeability;
b) test methods;
c) uniform requirements for the electrical and mechanical properties
This document is intended to be read in conjunction with IEC 60153-1, which gives general requirements and test methods. This fourth edition cancels and replaces the third edition published in 2017. edition:
a. change of the designation scheme for small circular waveguides (e.g. C 25.5k instead of C 25500);
b. revision of Table 1:
- correction of two waveguide designations (now C 1.2k, C 12k);
- correction of three waveguide diameters (C 140, C 1.4k, C 14k);
- tightening of inner diameter tolerances for waveguides smaller than C 890;
- deletion of waveguide attenuation values for aluminium, gold, and brass;
c. deletion of Table 2 (duplication) and replacement with the table of intermediate waveguide sizes originally envisaged here;
d. addition of an equation for calculating the attenuation of waveguides made of any material.

Guides d'ondes métalliques creux - Partie 4: Spécifications applicables aux guides d’ondes circulaires

lEC 60153-4:2022 spécifie des tubes métalliques creux rectilignes de section circulaire destinés à être utilisés comme guides d’ondes dans les matériels électroniques.
Le présent document a pour but de spécifier les guides d’ondes métalliques creux en donnant:
a) les détails nécessaires pour assurer la compatibilité et, dès lors que c’est essentiel, l’interchangeabilité;
b) les méthodes d’essai;
c) des exigences uniformes pour les propriétés électriques et mécaniques.
Le présent document est destiné à être lu conjointement avec l’IEC 60153-1, qui fournit les exigences générales et les méthodes d’essai. Cette quatrième édition annule et remplace la troisième édition parue en 2017. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a. modification du système de désignation des petits guides d’ondes circulaires (par exemple C 25.5k au lieu de C 25500);
b. révision du Tableau 1:
- correction de la désignation de deux guides d’ondes (désormais C 1.2k et C 12k);
- correction du diamètre de trois guides d’ondes (C 140, C 1.4k et C 14k);
- resserrement des tolérances sur les diamètres intérieurs des guides d’ondes de dimensions inférieures à celles du type C 890;
- suppression des valeurs d’affaiblissement des guides d’ondes pour l’aluminium, l’or et le laiton;
c. suppression du Tableau 2 (duplication) et remplacement par le tableau des guides d’ondes de tailles intermédiaires initialement prévu à cet emplacement;
d. ajout d’une équation pour le calcul de l’affaiblissement des guides d’ondes quel que soit le matériau dont ils sont constitués.

General Information

Status
Published
Publication Date
08-Jun-2022
Current Stage
PPUB - Publication issued
Start Date
17-Jun-2022
Completion Date
09-Jun-2022
Ref Project

Relations

Buy Standard

Standard
IEC 60153-4:2022 - Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
English and French language
29 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60153-4 ®
Edition 4.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Hollow metallic waveguides –
Part 4: Relevant specifications for circular waveguides

Guides d’ondes métalliques creux –
Partie 4: Spécifications applicables aux guides d’ondes circulaires

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 300 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 19 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.

Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC Products & Services Portal - products.iec.ch

IEC 60153-4 ®
Edition 4.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Hollow metallic waveguides –
Part 4: Relevant specifications for circular waveguides

Guides d’ondes métalliques creux –

Partie 4: Spécifications applicables aux guides d’ondes circulaires

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.10 ISBN 978-2-8322-0832-8

– 2 – IEC 60153-4:2022 © IEC 2022
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General . 6
4.1 Standardized types . 6
4.2 Type designation . 6
4.3 Frequency range . 6
5 Mechanical requirements . 7
5.1 General . 7
5.2 Dimensions . 10
5.2.1 Inner dimensions . 10
5.2.2 Wall thickness . 10
5.2.3 Eccentricity . 11
5.2.4 Outer dimensions . 11
5.3 Other mechanical requirements . 11
5.3.1 Bow . 11
5.3.2 Surface roughness . 11
5.3.3 Internal stresses . 11
6 Electrical tests – Attenuation coefficient . 12
7 Additional tests – Pressure sealing . 13
Bibliography . 14

Table 1 – Circular waveguides (preferred sizes) . 8
Table 2 – Circular waveguides (intermediate and preferred sizes). 9
Table 3 – Inner diameter tolerances . 10
Table 4 – Outer diameter tolerances . 11

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOLLOW METALLIC WAVEGUIDES –
Part 4: Relevant specifications for circular waveguides

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60153-4 has been prepared by subcommittee 46F: RF and microwave passive components,
of IEC technical committee 46: Cables, wires, waveguides, RF connectors, RF and microwave
passive components and accessories. It is an International Standard.
This fourth edition cancels and replaces the third edition published in 2017. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) change of the designation scheme for small circular waveguides (e.g. C 25.5k instead of
C 25500);
b) revision of Table 1:
• correction of two waveguide designations (now C 1.2k, C 12k);
• correction of three waveguide diameters (C 140, C 1.4k, C 14k);
• tightening of inner diameter tolerances for waveguides smaller than C 890;
• deletion of waveguide attenuation values for aluminium, gold, and brass;

– 4 – IEC 60153-4:2022 © IEC 2022
c) deletion of Table 2 (duplication) and replacement with the table of intermediate waveguide
sizes originally envisaged here;
d) addition of an equation for calculating the attenuation of waveguides made of any material.
The text of this International Standard is based on the following documents:
Draft Report on voting
46F/616/FDIS 46F/621/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 60153 series, published under the general title Hollow metallic
waveguides, can be found on the IEC website.
This International Standard is to be read in conjunction with IEC 60153-1.
The committee has decided that the contents of this document will remain unchang
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.