Information technology - Home Electronic System (HES) gateway - Part 4-2: Structure - Simple gateway

ISO/IEC 15045-4-2:2024 specifies the simple HES gateway, which is one of a set of physical classes introduced in ISO/IEC 15045-1:2004

General Information

Status
Published
Publication Date
09-Dec-2024
Current Stage
PPUB - Publication issued
Start Date
10-Dec-2024
Completion Date
09-Dec-2024

Overview

ISO/IEC 15045-4-2:2024 - Information technology - Home Electronic System (HES) gateway - Part 4-2: Structure - Simple gateway - defines the simple HES gateway physical class for home and building electronic systems. The standard specifies a standalone gateway module (one housing) that manages communications and translation between two networks: either HAN-to-HAN (two Home Area Networks) or WAN-to-HAN (one Wide Area Network to one Home Area Network). It is part of the ISO/IEC 15045 HES gateway series and complements the HES interoperability framework that relies on ISO/IEC 18012 for functional interworking.

Key technical topics and requirements

  • Physical class and scope
    • Defines the simple HES gateway as a minimum-complexity, non-expandable gateway implementation.
    • One of the physical classes introduced by ISO/IEC 15045-1:2004.
  • Alternative configurations (conformance)
    • Implementers must choose one of two configurations: HAN-to-HAN (basic translator service) or WAN-to-HAN (basic support service).
  • Modular logical structure
    • Uses logical modules such as HAN interface and WAN interface modules that exchange protocol data units (PDUs).
    • Preserves HES modular structure and HES-CLME messaging concepts while simplifying internals.
  • Internal communication
    • Employs HES-CLDPE (Home Electronic System Common Language Direct PDU Exchange) for internal PDU links between modules instead of the serial event bus (HES-CLIP).
    • HES-CLDPE implementations are left to manufacturers (wiring, PCB traces, internal chip links).
  • Services and mechanisms
    • Includes a binding map service (noted for HAN-to-HAN translators) to map and translate messages between networks.
    • Emphasis on interoperability, privacy, security, and safety as core gateway functions.
  • Conformance requirement
    • A conforming HES gateway system shall implement one of the two specified simple gateway alternative configurations.

Applications and who uses this standard

  • Intended for: gateway manufacturers, IoT and smart-home device makers, system integrators, building automation vendors, standards authors, and solution architects designing simple gateway products for homes and small buildings.
  • Practical uses:
    • Translating and interoperating between heterogeneous HANs (e.g., different vendor protocols).
    • Providing controlled WAN access for remote services while preserving local privacy and safety.
    • Delivering low-cost, dedicated gateway solutions for single-application deployments.

Related standards

  • ISO/IEC 15045-1:2004 - HES gateway structural classes (background)
  • ISO/IEC 15045-4-1:2024 - Structure - Structural class and module requirements (normative reference)
  • ISO/IEC 18012 series - Functional interworking and interoperability framework

Keywords: ISO/IEC 15045-4-2, HES gateway, simple gateway, HAN, WAN, interoperability, HES-CLDPE, HES-CLIP, HES-CLME, binding map service, home electronic system.

Standard

ISO/IEC 15045-4-2:2024 - Information technology - Home Electronic System (HES) gateway - Part 4-2: Structure - Simple gateway Released:10. 12. 2024 Isbn:9782832700037

English language
13 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO/IEC 15045-4-2:2024 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Information technology - Home Electronic System (HES) gateway - Part 4-2: Structure - Simple gateway". This standard covers: ISO/IEC 15045-4-2:2024 specifies the simple HES gateway, which is one of a set of physical classes introduced in ISO/IEC 15045-1:2004

ISO/IEC 15045-4-2:2024 specifies the simple HES gateway, which is one of a set of physical classes introduced in ISO/IEC 15045-1:2004

ISO/IEC 15045-4-2:2024 is classified under the following ICS (International Classification for Standards) categories: 35.200 - Interface and interconnection equipment; 35.240.99 - IT applications in other fields. The ICS classification helps identify the subject area and facilitates finding related standards.

You can purchase ISO/IEC 15045-4-2:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of IEC standards.

Standards Content (Sample)


ISO/IEC 15045-4-2
Edition 1.0 2024-12
INTERNATIONAL
STANDARD
colour
inside
Information technology – Home Electronic System (HES) gateway –
Part 4-2: Structure – Simple gateway

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about ISO/IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.

IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.

Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need

further assistance, please contact the Customer Service
Centre: sales@iec.ch.
ISO/IEC 15045-4-2
Edition 1.0 2024-12
INTERNATIONAL
STANDARD
colour
inside
Information technology – Home Electronic System (HES) gateway –

Part 4-2: Structure – Simple gateway

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 35.200; 35.240.99 ISBN 978-2-8327-0003-7

– 2 – ISO/IEC 15045-4-2:2024 © ISO/IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
0.1 Overview. 5
0.2 Relation to existing work . 5
0.3 Simple gateway . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 8
4 Conformance . 8
5 Simple HES gateway family . 8
5.1 Simple HES gateway . 8
5.2 Simple HES gateway alternative configurations. 10
5.2.1 General . 10
5.2.2 Simple HES gateway: HAN-to-HAN (basic translator service) . 10
5.2.3 Simple HES gateway: WAN-to-HAN (basic support service) . 11
Bibliography . 13

Figure 1 – ISO/IEC 15045-4-2 within the core interoperability and HES gateway
standards . 6
Figure 2 – Two HANs . 9
Figure 3 – One WAN and one HAN . 9
Figure 4 – Logical modules for two HANs . 9
Figure 5 – Logical modules for one WAN and one HAN . 9
Figure 6 – Simple HES gateway with two HANs (basic translator service) . 10
Figure 7 – Simple HES gateway with one WAN and one HAN (basic support service) . 11

INFORMATION TECHNOLOGY –
HOME ELECTRONIC SYSTEM (HES) GATEWAY –

Part 4-2: Structure – Simple gateway

FOREWORD
1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental,
in liaison with ISO and IEC, also take part in the work.
2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO National bodies.
3) IEC and ISO documents have the form of recommendations for international use and are accepted by IEC and
ISO National bodies in that sense. While all reasonable efforts are made to ensure that the technical content of
IEC and ISO documents is accurate, IEC and ISO cannot be held responsible for the way in which they are used
or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC and ISO National bodies undertake to apply IEC and ISO
documents transparently to the maximum extent possible in their national and regional publications. Any
divergence between any IEC and ISO document and the corresponding national or regional publication shall be
clearly indicated in the latter.
5) IEC and ISO do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC and ISO marks of conformity. IEC and ISO are not
responsible for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this document.
7) No liability shall attach to IEC and ISO or their directors, employees, servants or agents including individual
experts and members of its technical committees and IEC and ISO National bodies for any personal injury,
property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including
legal fees) and expenses arising out of the publication, use of, or reliance upon, this ISO/IEC document or any
other IEC and ISO documents.
8) Attention is drawn to the Normative references cited in this document. Use of the referenced publications is
indispensable for the correct application of this document.
9) IEC and ISO draw attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC and ISO take no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, IEC and ISO had not received notice of
(a) patent(s), which may be required to implement this document. However, implementers are cautioned that this
may not represent the latest information, which may be obtained from the patent database available at
https://patents.iec.ch and www.iso.org/patents. IEC and ISO shall not be held responsible for identifying any or
all such patent rights.
ISO/IEC 15045-4-2 has been prepared by subcommittee 25: Interconnection of information
technology equipment, of ISO/IEC joint technical committee 1: Information technology. It is an
International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
JTC1-SC25/3192/CDV JTC1-SC25/3259/RVC

Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1, and the ISO/IEC Directives, JTC 1 Supplement
available at www.iec.ch/members_experts/refdocs and www.iso.org/directives.

– 4 – ISO/IEC 15045-4-2:2024 © ISO/IEC 2024
A list of all parts in the ISO/IEC 15045 series, published under the general title Information
technology – Home Electronic System (HES) gateway, can be found on the IEC and
ISO websites.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

INTRODUCTION
0.1 Overview
The Home Electronic Sys
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...