IEC 60216-3:2006/COR1:2009
(Corrigendum)Corrigendum 1 - Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
Corrigendum 1 - Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60216-3
(Second edition – 2006)
Electrical insulating materials – Thermal endurance properties –
Part 3: Instructions for calculating thermal endurance characteristics
CORRIGENDUM 1
...
This May Also Interest You
IEC 60216-3:2021 is available as IEC 60216-3:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60216-3:2021 specifies the calculation procedures used for deriving thermal endurance characteristics from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2, using fixed ageing temperatures and variable ageing times. The experimental data can be obtained using non-destructive, destructive or proof tests. Data obtained from non-destructive or proof tests can be incomplete, in that it is possible that measurement of times taken to reach the end-point will have been terminated at some point after the median time but before all specimens have reached end-point. The procedures are illustrated by worked examples, and suitable computer programs are recommended to facilitate the calculations.
This edition includes the following significant technical changes with respect to the previous edition:
- a new computer program has been included;
- Annex E " has been completely reworked.
- Standard179 pagesEnglish languagesale 15% off
- Standard113 pagesEnglish and French languagesale 15% off
IEC 60216-3:2006 specifies the calculation procedures to be used for deriving thermal endurance characteristics from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2, using fixed ageing temperatures and variable ageing times. The experimental data may be obtained using non-destructive, destructive or proof tests. Data obtained from non-destructive or proof tests may be incomplete, in that measurement of times taken to reach the endpoint may have been terminated at some point after the median time but before all specimens have reached end-point. The procedures are illustrated by worked examples, and suitable computer programs are recommended to facilitate the calculations. The major technical changes with regard to the first edition concern an updating of Table C.2. In addition, the scope has been extended to cover a greater range of data characteristics, particularly with regard to incomplete data, as often obtained from proof test criteria. The greater flexibility of use should lead to more efficient employment of the time available for ageing purposes. Finally, the procedures specified in this part of IEC 60216 have been extensively tested and have been used to calculate results from a large body of experimental data obtained in accordance with other parts of the standard. Annex E "Computer program" has been completely reworked.
Please be aware that the computer program provided in this publication is not compatible with the 64-bit version of Windows 7.
- Standard50 pagesEnglish languagesale 15% off
- Standard10 pagesEnglish and French languagesale 15% off
Specifies the calculation procedures to be used for deriving thermal endurance characteristics from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2. The experimental data may be obtained using non-destructive, destructive or proof tests. Data obtained from non-destructive or proof tests may be incomplete, in that measurement of times taken to reach the endpoint may have been terminated at some point after the median time but before all specimens have reached end-point. The procedures are illustrated by worked examples, and suitable computer programs are recommended to facilitate the calculations.
- Standard125 pagesEnglish and French languagesale 15% off
Covers the minimum requirements for ventilated and heated multi-chamber ovens used for thermal endurance evaluation of electrical insulation and of any other appropriate thermal conditioning application where the use of single-chamber ovens is inappropriate. Covers ovens designated to operate over all or part of the temperature range from 20 K above ambient to 500°C. Gives acceptance tests and in-service monitoring tests for both unloaded and loaded multi-chamber ovens and conditions of use.
- Standard27 pagesEnglish and French languagesale 15% off
IEC 60216-3:2021 is available as IEC 60216-3:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60216-3:2021 specifies the calculation procedures used for deriving thermal endurance characteristics from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2, using fixed ageing temperatures and variable ageing times. The experimental data can be obtained using non-destructive, destructive or proof tests. Data obtained from non-destructive or proof tests can be incomplete, in that it is possible that measurement of times taken to reach the end-point will have been terminated at some point after the median time but before all specimens have reached end-point. The procedures are illustrated by worked examples, and suitable computer programs are recommended to facilitate the calculations.
This edition includes the following significant technical changes with respect to the previous edition:
- a new computer program has been included;
- Annex E " has been completely reworked.
- Standard179 pagesEnglish languagesale 15% off
- Standard113 pagesEnglish and French languagesale 15% off
IEC 60216-3:2006 specifies the calculation procedures to be used for deriving thermal endurance characteristics from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2, using fixed ageing temperatures and variable ageing times. The experimental data may be obtained using non-destructive, destructive or proof tests. Data obtained from non-destructive or proof tests may be incomplete, in that measurement of times taken to reach the endpoint may have been terminated at some point after the median time but before all specimens have reached end-point. The procedures are illustrated by worked examples, and suitable computer programs are recommended to facilitate the calculations. The major technical changes with regard to the first edition concern an updating of Table C.2. In addition, the scope has been extended to cover a greater range of data characteristics, particularly with regard to incomplete data, as often obtained from proof test criteria. The greater flexibility of use should lead to more efficient employment of the time available for ageing purposes. Finally, the procedures specified in this part of IEC 60216 have been extensively tested and have been used to calculate results from a large body of experimental data obtained in accordance with other parts of the standard. Annex E "Computer program" has been completely reworked.
Please be aware that the computer program provided in this publication is not compatible with the 64-bit version of Windows 7.
- Standard50 pagesEnglish languagesale 15% off
- Standard10 pagesEnglish and French languagesale 15% off
Specifies the calculation procedures to be used for deriving thermal endurance characteristics from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2. The experimental data may be obtained using non-destructive, destructive or proof tests. Data obtained from non-destructive or proof tests may be incomplete, in that measurement of times taken to reach the endpoint may have been terminated at some point after the median time but before all specimens have reached end-point. The procedures are illustrated by worked examples, and suitable computer programs are recommended to facilitate the calculations.
- Standard125 pagesEnglish and French languagesale 15% off
Covers the minimum requirements for ventilated and heated multi-chamber ovens used for thermal endurance evaluation of electrical insulation and of any other appropriate thermal conditioning application where the use of single-chamber ovens is inappropriate. Covers ovens designated to operate over all or part of the temperature range from 20 K above ambient to 500°C. Gives acceptance tests and in-service monitoring tests for both unloaded and loaded multi-chamber ovens and conditions of use.
- Standard27 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.