IEC 62341-6-3:2012
(Main)Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality
Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality
IEC 62341-6-3:2012 specifies the standard measurement conditions and measuring methods for determining image quality of organic light emitting diode (OLED) display panels and modules. More specifically, this standard focuses on five specific aspects of image quality, i.e., the viewing angle range, cross-talk, flicker, static image resolution, and moving image resolution.
Afficheurs à diodes électroluminescentes organiques (OLED) - Partie 6-3: Méthodes de mesure de la qualité des images
La CEI 62341-6-3:2012 spécifie les conditions et les méthodes de mesure normalisées pour déterminer la qualité des images des panneaux et des modules d'affichage à diode électroluminescente organique (OLED: Organic Light Emitting Diode). Plus spécifiquement, la présente norme porte sur cinq aspects spécifiques de la qualité des images, à savoir la largeur d'angle de visualisation, la diaphonie, le papillotement, la résolution des images statiques et la résolution des images animées.
General Information
Relations
Standards Content (Sample)
IEC 62341-6-3 ®
Edition 1.0 2012-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Organic light emitting diode (OLED) displays –
Part 6-3: Measuring methods of image quality
Afficheurs à diodes électroluminescentes organiques (OLED) –
Partie 6-3: Méthodes de mesure de la qualité des images
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 62341-6-3 ®
Edition 1.0 2012-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Organic light emitting diode (OLED) displays –
Part 6-3: Measuring methods of image quality
Afficheurs à diodes électroluminescentes organiques (OLED) –
Partie 6-3: Méthodes de mesure de la qualité des images
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 31.260 ISBN 978-2-83220-294-4
– 2 – 62341-6-3 © IEC:2012
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols, units and abbreviations . 6
3.1 Terms, definitions, symbols and units . 6
3.2 Abbreviations . 6
4 Standard measuring equipment and coordinate system . 7
4.1 Light measuring devices . 7
4.2 Viewing direction coordinate system . 7
5 Measuring conditions . 8
5.1 Standard measuring environmental conditions . 8
5.2 Power supply . 9
5.3 Warm-up time . 9
5.4 Standard measuring dark-room conditions . 9
5.5 Standard set-up conditions . 9
6 Measuring methods of image quality . 10
6.1 Viewing angle range . 10
6.1.1 Purpose . 10
6.1.2 Measuring conditions . 10
6.1.3 Set-up . 10
6.1.4 Measurement and evaluation . 11
6.1.5 Reporting. 12
6.2 Cross-talk . 13
6.2.1 Purpose . 13
6.2.2 Measuring conditions . 13
6.2.3 Measurement and evaluation . 13
6.2.4 Reporting. 16
6.3 Flicker . 16
6.3.1 Purpose . 16
6.3.2 Measuring conditions . 16
6.3.3 Set-up . 16
6.3.4 Measuring method . 17
6.3.5 Evaluation method . 17
6.3.6 Reporting. 19
6.4 Static image resolution . 19
6.4.1 Purpose . 19
6.4.2 Measuring conditions . 20
6.4.3 Measuring method . 20
6.4.4 Calculation and reporting . 20
6.5 Moving image resolution . 21
6.5.1 Purpose . 21
6.5.2 Measuring conditions . 21
6.5.3 Temporal integration method . 23
6.5.4 Image tracking method . 25
6.5.5 Dynamic MTF calculation . 27
62341-6-3 © IEC:2012 – 3 –
6.5.6 Reporting. 27
Annex A (informative) Simple matrix method for correction stray light of imaging
instruments . 28
Bibliography . 30
Figure 1 – Representation of the viewing direction (equivalent to the direction of
measurement) by the angle of inclination, θ and the angle of rotation (azimuth angle),
φ in a polar coordinate system . 8
Figure 2 – DUT installation conditions . 9
Figure 3 – Geometry used for measuring viewing angle range . 11
Figure 4 – Standard measurement positions, indicated by P -P , are located relative
0 8
to the height (V) and display width (H) of active area. . 13
Figure 5 – Luminance measurement of 4 % window at P . 14
Figure 6 – Luminance measurement at P with windows A ,A , A and A . 15
0 W1 W2 B3 B4
Figure 7 – Luminance measurement at P with windows A , A , A and A . 15
0 W5 W8 B5 B8
Figure 8 – Apparatus arrangement . 16
Figure 9 – Temporal contrast sensitivity function . 18
Figure 10 – Example of flicker modulation waveform . 18
Figure 11 – Contrast modulation measurement . 21
Figure 12 – Peak luminance and amplitude of display test signal . 23
Figure 13 – Set-up for measurement of the temporal response of the DUT . 23
Figure 14 – Sinusoidal luminance pattern and corresponding gray level values . 24
Figure 15 – Input code sequences (left) and corresponding temporal luminance
transitions (right). 25
Figure 16 – Example of captured image . 26
Figure 17 – Example of Fourier transform . 27
Figure 18 – Example of limit resolution evaluation . 27
Figure A.1 – Result of spatial stray light correction for an imaging photometer used to
measure a black spot surrounded by a large bright light source. . 29
Table 1 – Temporal contrast sensitivity function . 17
– 4 – 62341-6-3 © IEC:2012
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS –
Part 6-3: Measuring methods of image quality
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization compri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.