EN 60730-2-6:2016/A1:2020

SLOVENSKI STANDARD
01-marec-2021
Avtomatske električne krmilne naprave - 2-6. del: Posebne zahteve za avtomatske
električne, na tlak občutljive naprave, vključno z mehanskimi zahtevami -
Dopolnilo A1
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical
pressure sensing controls including mechanical requirements
Automatische elektrische Regel- und Steuergeräte - Teil 2-6: Besondere Anforderungen
an automatische elektrische Druckregel- und Steuergeräte einschließlich mechanischer
Anforderungen
Dispositifs de commande électrique automatiques - Partie 2-6: Exigences particulières
pour les dispositifs de commande électrique automatiques sensibles à la pression y
compris les exigences mécaniques
Ta slovenski standard je istoveten z: EN 60730-2-6:2016/A1:2020
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60730-2-6:2016/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 97.120
English Version
Automatic electrical controls - Part 2-6: Particular requirements
for automatic electrical pressure sensing controls including
mechanical requirements
(IEC 60730-2-6:2015/A1:2019)
Dispositifs de commande électrique automatiques - Partie Automatische elektrische Regel- und Steuergeräte - Teil 2-
2-6: Exigences particulières pour les dispositifs de 6: Besondere Anforderungen an automatische elektrische
commande électrique automatiques sensibles à la pression Druckregel- und Steuergeräte einschließlich mechanischer
y compris les exigences mécaniques Anforderungen
(IEC 60730-2-6:2015/A1:2019) (IEC 60730-2-6:2015/A1:2019)
This amendment A1 modifies the European Standard EN 60730-2-6:2016; it was approved by CENELEC on 2019-10-28. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60730-2-6:2016/A1:2020 E

European foreword
The text of document 72/1180/FDIS, future IEC 60730-2-6/A1, prepared by IEC/TC 72 "Automatic
electrical controls" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-11-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-01
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 60730-2-6:2015/A1:2019 was approved by CENELEC as a
European Sta
...