EN 61800-3:2004

SLOVENSKI SIST EN 61800-3:2005

STANDARD
junij 2005
(OHNWULþQLSRJRQVNLVLVWHPL]QDVWDYOMLYRKLWURVWMRGHO=DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVWLQSRVHEQHSUHVNXVQHPHWRGH,(&
3:2004)
Adjustable speed electrical power drive systems - Part 3: EMC requirements and
specific test methods (IEC 61800-3:2004)
ICS 5HIHUHQþQDãWHYLOND
29.200; 33.100.01
! "#$%!&!%’()*#+’
EUROPEAN STANDARD EN 61800-3
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2004

ICS 29.200 ; 33.100 Supersedes EN 61800-3:1996 + A11:2000

English version
Adjustable speed electrical power drive systems
Part 3: EMC requirements and specific test methods
(IEC 61800-3:2004)
Entraînements électriques de puissance  Drehzahlveränderbare elektrische
à vitesse variable Antriebe
Partie 3: Exigences de CEM et méthodes Teil 3: EMV-Anforderungen einschließlich
d'essais spécifiques spezieller Prüfverfahren
(CEI 61800-3:2004) (IEC 61800-3:2004)

This European Standard was approved by CENELEC on 2004-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61800-3:2004 E
Foreword
The text of document 22G/127/FDIS, future edition 2 of IEC 61800-3, prepared by SC 22G, Adjustable
speed electric drive systems incorporating semiconductor power converters, of IEC TC 22, Power
electronic systems and equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61800-3 on 2004-10-01.
This European Standard supersedes EN 61800-3:1996 + A11:2000 + corrigendum May 2001.
This European Standard introduces three main changes:
a) the classes of distribution (unrestricted and restricted) of the PDS have been replaced by
categories of PDS (C1 to C4) with definitions related to the product itself and its intended use;
b) better coverage of emission limits;
c) an EMC plan is generalized for category C4.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-10-01
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of Directive
89/336/EEC. See Annex ZZ.
Annexes ZA and ZZ have been added by CENELEC.
__________
- 3 - EN 61800-3:2004
Endorsement notice
The text of the International Standard IEC 61800-3:2004 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60038 NOTE Harmonized as HD 472 S1:1989 (modified).
IEC 60146-1-3 NOTE Harmonized as EN 60146-1-3:1993 (not modified).
IEC 60146-2 NOTE Harmonized as EN 60146-2:2000 (not modified).
IEC 61000-2-12 NOTE Harmonized as EN 61000-2-12:2003 (not modified).
IEC 61000-4-1 NOTE Harmonized as EN 61000-4-1:2000 (not modified).
IEC 61000-4-7 NOTE Harmonized as EN 61000-4-7:2000 (not modified).
IEC 61000-4-9 NOTE Harmonized as EN 61000-4-9:1993 (not modified).
IEC 61000-4-10 NOTE Harmonized as EN 61000-4-10:1993 (not modified).
IEC 61000-6-1 NOTE Harmonized as EN 61000-6-1:2001 (modified).
IEC 61000-6-2 NOTE Harmonized as EN 61000-6-2:1999 (not modified).
IEC 61000-6-4 NOTE Harmonized as EN 61000-6-4:2001 (modified).
IEC 61800-5-1 NOTE Harmonized as EN 61800-5-1:2003 (not modified).
__________
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-131 2002 International Electrotechnical - -
Vocabulary
Part 131: Circuit theory
IEC 60050-151 2001 Part 151: Electrical and magnetic - -
devices
IEC 60050-161 1990 Chapter 161: Electromagnetic - -
compatibility
IEC 60146-1-1 1991 Semiconductor convertors - General EN 60146-1-1 1993
requirements and line commutated
convertors
Part 1-1: Specifications of basic
requirements
IEC 60364-1 2001 Electrical installations of buildings - -
Part 1: Fundamental principles,
assessment of general characteristics,
definitions
1)
IEC 60664-1 1992 Insulation coordination for equipment EN 60664-1 2003
within low-voltage systems
Part 1: Principles, requirements and
tests
2)
IEC/TR 61000-1-1 – Electromagnetic compatibility (EMC) - -
Part 1: General - Section 1: Application
and interpretation of fundamental
definitions and terms
IEC/TR 61000-2-1 1990 Part 2: Environment - Section 1: - -
Description of the environment -
Electromagnetic environment for low-
frequency conducted disturbances and
signalling in public power supply
systems
1)
EN 60664-1 includes A1:2000 + A2:2002 to IEC 60664-1.
2)
Undated reference.
- 5 - EN 61800-3:2004
Publication Year Title EN/HD Year
IEC 61000-2-2 2002 Part 2-2: Environment - Compatibility EN 61000-2-2 2002
levels for low-frequency conducted
disturbances and signalling in public
low-voltage power supply systems

IEC 61000-2-4 2002 Part 2-4: Environment - Compatibility EN 61000-2-4 2002
levels in industrial plants for low-
frequency conducted disturbances

IEC 61000-2-6 1995 Part 2-6: Environment - Assessment of - -
the emission levels in the power supply
of industrial plants as regards low-
frequency conducted disturbances

IEC 61000-3-2 2000 Part 3-2: Limits - Limits for harmonic EN 61000-3-2 2000
(mod) current emissions (equipment input
current up to and including 16 A per
phase)
IEC 61000-3-3 1994 Part 3-3: Limits - Limitation of voltage EN 61000-3-3 1995
changes, voltage fluctuations and flicker + corr. July 1997
in public low-voltage supply systems,
for equipment with rated current ≤16 A
per phase and not subject to conditional
connection
IEC/TS 61000-3-4 1998 Electromagnetic compatibility (EMC) - -
Part 3-4: Limits - Limitation of emission
of harmonic currents in low-voltage
power supply systems for equipment
with rated current greater than 16 A

IEC 61000-3-7 1996 Electrical apparatus for the detection - -
and measurement of combustible
gases, toxic gases or oxygen -
Requirements and tests for apparatus
using software and/or digital
technologies
IEC 61000-3-11 2000 Part 3-11: Limits - Limitation of voltage EN 61000-3-11 2000
changes, voltage fluctuations and flicker
in public low-voltage supply systems -
Equipment with rated current ≤ 75 A
and subject to conditional connection

2) 3)
IEC 61000-4-2 – Part 4-2: Testing and measurement EN 61000-4-2 1995
techniques - Electrostatic discharge
immunity test
IEC 61000-4-3 2002 Part 4-3: Testing and measurement EN 61000-4-3 2002
techniques - Radiated, radio-frequency,
electromagnetic field immunity test

3)
Valid edition at date of issue.

Publication Year Title EN/HD Year
IEC 61000-4-4 1995 Part 4-4: Testing and measurement EN 61000-4-4 1995
techniques - Electrical fast
transient/burst immunity test
A1 2000 A1 2001
A2 2001 A2 2001
IEC 61000-4-5 1995 Part 4-5: Testing and measurement EN 61000-4-5 1995
techniques - Surge immunity test

IEC 61000-4-6 2003 Part 4-6: Testing and measurement - -
techniques - Immunity to conducted
disturbances, induced by radio-
frequency fields
IEC 61000-4-8 1993 Part 4-8: Testing and measurement EN 61000-4-8 1993
techniques - Power frequency magnetic
field immunity test
A1 2000 A1 2001
IEC 61800-1 1997 Adjustable speed electrical power drive EN 61800-1 1998
systems
Part 1: General requirements - Rating
specifications for low voltage adjustable
speed d.c. power drive systems

IEC 61800-2 1998 Part 2: General requirements - Rating EN 61800-2 1998
specifications for low voltage adjustable
frequency a.c. power drive systems

IEC 61800-4 2002 Part 4: General requirements - Rating EN 61800-4 2003
specifications for a.c. power drive
systems above 1 000 V a.c. and not
exceeding 35 kV
CISPR 11 2003 Industrial scientific and medical (ISM) - -
radio-frequency equipment -
Electromagnetic disturbance
characteristics - Limits and methods of
measurement
CISPR 14 Series Electromagnetic compatibility - EN 55014 Series
Requirements for household
appliances, electric tools and similar
apparatus
CISPR 16-1 1999 Specification for radio disturbance and - -
immunity measuring apparatus and
methods
Part 1: Radio disturbance and immunity
measuring apparatus
A1 2002 - -
CISPR 22 2003 Information technology equipment - - -
Radio disturbance characteristics -
Limits and methods of measurement

- 7 - EN 61800-3:2004
Annex ZZ
(informative)
Coverage of Essential Requirements of EC Directives
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers all
relevant essential requirements as given in Article 4 of the EC Directive 89/336/EEC.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive[s] concerned.
WARNING: Other requirements and other EC Directives may be applicable to the products falling
within the scope of this standard.
__________
NORME CEI
INTERNATIONALE IEC
61800-3
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2004-08
Entraînements électriques de puissance
à vitesse variable –
Partie 3:
Exigences de CEM et méthodes
d'essais spécifiques
Adjustable speed electrical power
drive systems –
Part 3:
EMC requirements and specific
test methods
” IEC 2004 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale XE
PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61800-3 ” IEC:2004 – 3 –
CONTENTS
FOREWORD.11
1 Scope and object.15
2 Normative references.17
3 Terms and definitions .21
4 Common requirements.31
4.1 General conditions.31
4.2 Tests.33
4.3 Documentation for the user.33
5 Immunity requirements.35
5.1 General conditions.35
5.2 Basic immunity requirements – Low-frequency disturbances.41
5.3 Basic immunity requirements – High-frequency disturbances .51
5.4 Application of immunity requirements – statistical aspect.57
6 Emission.59
6.1 General emission requirements.59
6.2 Basic low-frequency emission limits .59
6.3 Conditions related to high-frequency emission measurement
...