EN 61034-2:2005/A2:2020

SLOVENSKI STANDARD
01-maj-2020
Merjenje gostote dima pri gorenju kablov pri določenih pogojih - 2. del: Preskusni
postopek in zahteve - Dopolnilo A2 (IEC 61034-2:2005/A2:2019)
Measurement of smoke density of cables burning under defined conditions - Part 2: Test
procedure and requirements (IEC 61034-2:2005/A2:2019)
Messung der Rauchdichte von Kabeln und isolierten Leitungen beim Brennen unter
definierten Bedingungen - Teil 2: Prüfverfahren und Anforderungen (IEC 61034-
2:2005/A2:2019)
Mesure de la densité de fumées dégagées par des câbles brûlant dans des conditions
définies - Partie 2: Procédure d'essai et exigences (IEC 61034-2:2005/A2:2019)
Ta slovenski standard je istoveten z: EN 61034-2:2005/A2:2020
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61034-2:2005/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2020
ICS 13.220.40; 29.020; 29.060.20

English Version
Measurement of smoke density of cables burning under defined
conditions - Part 2: Test procedure and requirements
(IEC 61034-2:2005/A2:2019)
Mesure de la densité de fumées dégagées par des câbles Messung der Rauchdichte von Kabeln und isolierten
brûlant dans des conditions définies - Partie 2: Procédure Leitungen beim Brennen unter definierten Bedingungen -
d'essai et exigences Teil 2: Prüfverfahren und Anforderungen
(IEC 61034-2:2005/A2:2019) (IEC 61034-2:2005/A2:2019)
This amendment A2 modifies the European Standard EN 61034-2:2005; it was approved by CENELEC on 2019-12-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61034-2:2005/A2:2020 E

European foreword
The text of document 20/1886/FDIS, future IEC 61034-2/A2, prepared by IEC/TC 20 "Electric cables"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61034-
2:2005/A2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-09-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-12-27
document have to be withdrawn
Attention is drawn to the possibility that some of
...