EN 61158-3-16:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-16. del: Definicija opravil na nivoju podatkovnih povezav - Elementi tipa 16
(IEC 61158-3-16:2007)Industrielle Kommunikationsnetze - Feldbusse - Teil 3-16: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 16-ElementeRéseaux de communication industriels - Spécifications des bus de terrain - Partie 3-16: Définition des services des couches de liaison de données - Eléments de type 16Industrial communication networks - Fieldbus specifications - Part 3-16: Data-link layer service definition - Type 16 elements35.110OmreževanjeNetworking35.100.20Podatkovni povezovalni slojData link layer25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and controlICS:Ta slovenski standard je istoveten z:EN 61158-3-16:2008SIST EN 61158-3-16:2008en,de01-junij-2008SIST EN 61158-3-16:2008SLOVENSKI
STANDARDSIST EN 61491:2001SIST EN 61158-3:20041DGRPHãþD

EUROPEAN STANDARD EN 61158-3-16 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-3-16:2008 E
ICS 35.100.20; 25.040.40 Partially supersedes EN 61158-3:2004 and EN 61491:1998
English version
Industrial communication networks -
Fieldbus specifications -
Part 3-16: Data-link layer service definition -
Type 16 elements (IEC 61158-3-16:2007)
Réseaux de communication industriels -
Spécifications des bus de terrain -
Partie 3-16: Définition des services
des couches de liaison de données -
Eléments de type 16 (CEI 61158-3-16:2007)
Industrielle Kommunikationsnetze -
Feldbusse -
Teil 3-16: Dienstfestlegungen des
Data Link Layer (Sicherungsschicht) -
Typ 16-Elemente (IEC 61158-3-16:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
- 2 -
Foreword The text of document 65C/473/FDIS, future edition 1 of IEC 61158-3-16, prepared by SC 65C, Industrial networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61158-3-16 on 2008-02-01. This and the other parts of the EN 61158-3 series supersede EN 61158-3:2004. Together with EN 61158-2:2008 and its companion parts for Type 16, it also partially replaces EN 61491:1998 which is at present being revised (to be issued as a Technical Report). With respect to EN 61158-3:2004 the following changes were made: – deletion of Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-link layer, for lack of market relevance; – addition of new fieldbus types; – partition into multiple parts numbered 3-1, 3-2, …, 3-19. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-11-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-02-01 NOTE
Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all cases, the commitment to limited release of intellectual-property-rights made by the holders of those rights permits a particular data-link layer protocol type to be used with physical layer and application layer protocols in type combinations as specified explicitly in the EN 61784 series. Use of the various protocol types in other combinations may require permission from their respective intellectual-property-right holders. Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61158-3-16:2007 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61158-2 NOTE
Harmonized as EN 61158-2:2008 (not modified). IEC 61158-4-16 NOTE
Harmonized as EN 61158-4-16:2008 (not modified). IEC 61158-5-16 NOTE
Harmonized as EN 61158-5-16:2008 (not modified). IEC 61158-6-16 NOTE
Harmonized as EN 61158-6-16:2008 (not modified). IEC 61784-1 NOTE
Harmonized as EN 61784-1:2008 (not modified). __________ SIST EN 61158-3-16:2008

- 3 - EN 61158-3-16:2008 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO/IEC 7498-1 -1) Information technology - Open Systems Interconnection - Basic Reference Model:
The Basic Model EN ISO/IEC 7498-1 19952)
ISO/IEC 7498-3 -1) Information technology - Open Systems Interconnection - Basic Reference Model: Naming and addressing - -
ISO/IEC 10731 -1) Information technology - Open Systems Interconnection - Basic reference model - Conventions for the definition of OSI services - -
1) Undated reference. 2) Valid edition at date of issue. SIST EN 61158-3-16:2008

IEC 61158-3-16Edition 1.0 2007-12INTERNATIONAL STANDARD
Industrial communication networks – Fieldbus specifications –
Part 3-16: Data-link layer service definition – Type 16 elements
INTERNATIONAL ELECTROTECHNICAL COMMISSION TICS 35.100.20; 25.040.40 PRICE CODEISBN 2-8318-9419-0SIST EN 61158-3-16:2008

– 2 – 61158-3-16 © IEC:2007(E)
CONTENTS 0HFOREWORD.21H3 1HINTRODUCTION.22H5 2H1 Scope.23H6 3H1.1 Overview.24H6 4H1.2 Specifications.25H6 5H1.3 Conformance.26H6 6H2 Normative references.27H7 7H3 Terms, definitions, symbols, abbreviations and conventions.28H7 8H3.1 Reference model terms and definitions.29H7 9H3.2 Service convention terms and definitions.30H8 10H3.3 Data-link service terms and definitions.31H9 11H3.4 Symbols and abbreviations.32H12 12H3.5 Common conventions.33H13 13H4 Data-link services and concepts.34H14 14H4.1 Overview.35H14 15H4.2 Service channel services (SVC services).36H16 16H4.3 Realtime channel setup services (RTCS services).37H18 17H4.4 RTC services.38H20 18H4.5 File transmission services.39H23 19HBibliography.40H25
Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses.41H10
Table 1 – Summary of DL services and primitives.42H16 Table 2 – Read (RD).43H17 Table 3 – Write (WR).44H18 Table 4 – Initiate_cyclic_communication (ICC).45H19 Table 5 – Disable_cyclic_communication (DCC).46H20 Table 6 – Notify_Error (NER).47H20 Table 7 – Write_cyclic (WRC).48H21 Table 8 – Get_Device_Status (GDS).49H21 Table 9 – Write_Device_Status (SDS).50H22 Table 10 – Notify_Network_Status_Change (NNSC).51H23 Table 11 – File download (FD).52H23 Table 12 – File upload (FU).53H24
61158-3-16 © IEC:2007(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________ INDUSTRIAL COMMUNICATION NETWORKS – FIELDBUS SPECIFICATIONS –
Part 3-16: Data-link layer service definition – Type 16 elements
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. NOTE
Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all cases, the commitment to limited release of intellectual-property-rights made by the holders of those rights permits a particular data-link layer protocol type to be used with physical layer and application layer protocols in type combinations as specified explicitly in the IEC 61784 series. Use of the various protocol types in other combinations may require permission of their respective intellectual-property-right holders. International Standard IEC 61158-3-16 has been prepared by subcommittee 65C: Industrial networks, of IEC technical committee 65: Industrial-process measurement, control and a
...