Radio-frequency connectors -Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectors

IEC 61169-45:2014, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for type SQMA quick lock RF coaxial connectors. The connectors are normally used with 50 Ohms in microwave, telecommunication, wireless and other fields, connecting with RF cables or micro-strips. The operating frequency limit is up to 18 GHz. It describes the interface dimensions for general purpose connectors grade 2 and standard test connectors - grade 0 with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all detail specifications relative to type SQMA connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers all tests schedules and inspection requirements for assessment levels M and H.

Hochfrequenz-Steckverbinder - Teil 45: Rahmenspezifikation für koaxiale HF-Steckverbinder der SQMA-Serie mit Schnellverriegelung

Connecteurs pour fréquences radioélectriques - Partie 45: Spécification intermédiaire relative aux connecteurs coaxiaux RF à verrouillage rapide, série SQMA

L'IEC 61169-45:2014, qui est une spécification intermédiaire (SI), fournit des informations et des règles en vue de l'établissement de spécifications particulières (SP) de connecteurs coaxiaux RF de type SQMA à verrouillage rapide. Les connecteurs sont normalement utilisés avec une valeur de 50 Ohms dans des appareils communiquant sans fil, en hyperfréquences, de télécommunications ainsi que dans d'autres domaines, permettant la connexion avec les câbles RF ou les microrubans. La limite de fréquence de fonctionnement est inférieure ou égale à 18 GHz. Elle décrit également les dimensions d'interface pour des connecteurs d'usage général de classe 2, et des connecteurs d'essai normalisés - classe 0, ainsi que des informations concernant les calibres et les essais obligatoires choisis dans l'IEC 61169-1, applicables à toutes les spécifications particulières ayant trait aux connecteurs de la série SQMA. La présente spécification indique les caractéristiques de performance recommandées à prendre en compte pour la rédaction d'une spécification particulière, et elle couvre les programmes d'essais et les exigences de contrôle pour les niveaux d'assurance qualité M et H.

Radiofrekvenčni konektorji - 45. del: Oddelčna specifikacija za koaksialne zaklepne RF-konektorje serije SQMA (IEC 61169-45:2014)

Standard EN IEC 61169-45, ki je oddelčna specifikacija, podaja informacije in pravila za pripravo podrobnih specifikacij za koaksialne zaklepne RF-konektorje tipa SQMA. Konektorji se običajno uporabljajo s 50 O v mikrovalovnih, telekomunikacijskih, brezžičnih in drugih poljih, pri čemer se povezujejo z RF-kabli ali mikrotrakovi. Omejitev frekvenčnega območja delovanja je do 18 GHz. Opisuje dimenzije vmesnika za konektorje za splošni namen tipa 2 in standardne preskusne konektorje tipa 0 z informacijami o merjenju in obvezne preskuse, izbrane iz standarda IEC 61169-1, ki se uporabljajo za vse podrobne specifikacije v zvezi s konektorji tipa SQMA. Ta specifikacija določa priporočene lastnosti, ki jih je treba upoštevati pri sestavljanju podrobne specifikacije ter zajema vse urnike preskusov in zahteve za pregled za ravni vrednotenja M in H.

General Information

Status
Published
Publication Date
07-Aug-2014
Withdrawal Date
26-Jun-2017
Current Stage
6060 - Document made available - Publishing
Start Date
08-Aug-2014
Completion Date
08-Aug-2014

Buy Standard

Standard
EN 61169-45:2014
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2014
5DGLRIUHNYHQþQLNRQHNWRUMLGHO2GGHOþQDVSHFLILNDFLMD]DNRDNVLDOQH
]DNOHSQH5)NRQHNWRUMHVHULMH640$ ,(&
Radio-frequency connectors - Part 45: Sectional specification for series SQMA series
quick lock RF coaxial connectors
Ta slovenski standard je istoveten z: EN 61169-45:2014
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61169-45

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 33.120.30
English Version
Radio-frequency connectors -Part 45: Sectional specification for
series SQMA series quick lock RF coaxial connectors
(IEC 61169-45:2014)
Connecteurs pour fréquences radioélectriques - Partie 45: Hochfrequenz-Steckverbinder - Teil 45:
Spécification intermédiaire relative aux connecteurs Rahmenspezifikation für koaxiale HF Steckverbinder der
coaxiaux RF à verrouillage rapide, série SQMA SQMA-Serie mit Schnellverriegelung
(CEI 61169-45:2014) (IEC 61169-45:2014)
This European Standard was approved by CENELEC on 2014-06-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61169-45:2014 E
Foreword
The text of document 46F/238/CDV, future edition 1 of IEC 61169-45, prepared by SC 46F, "R.F. and
microwave passive components", of IEC TC 46, "Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61169-45:2014.
The following dates are fixed:
(dop) 2015-03-27
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-06-27
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61169-45:2014 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 61169-45:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61169-1 2013 Radio-frequency connectors -- Part 1: EN 61169-1 2013
Generic specification - General
requirements and measuring methods

IEC 61169-45 ®
Edition 1.0 2014-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio-frequency connectors –
Part 45: Sectional specification for SQMA series quick lock RF coaxial

connectors
Connecteurs pour fréquences radioélectriques –

Partie 45: Spécification intermédiaire relative aux connecteurs coaxiaux RF à

verrouillage rapide, série SQMA

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 33.120.30 ISBN 978-2-8322-1628-6

– 2 – IEC 61169-45:2014 © IEC 2014

CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Mating face and gauge information . 6
3.1 Dimensions – General connectors – Grade 2 . 6
3.1.1 Connector with pin-centre contact (see Figure 1) . 6
3.1.2 Connector with socket-centre contact (see Figure 2) . 8
3.2 Gauges . 9
3.2.1 Gauge pins for socket-centre contact (see Figure 3) . 9
3.2.2 Test procedure . 9
3.3 Dimensions – Standard test connectors – Grade 0 . 10
3.3.1 Connector with pin-centre contact (see Figure 4) . 10
3.3.2 Connector with socket-centre contact (see Figure 5) . 11
4 Quality assessment procedure . 12
4.1 General . 12
4.2 Ratings and characteristics . 12
4.3 Test schedule and inspection requirements . 15
4.3.1 Acceptance tests . 15
4.3.2 Periodic tests . 16
4.4 Procedures for quality conformance . 17
4.4.1 Quality conformance inspection . 17
4.4.2 Quality conformance and its maintenance . 17
4.5 Test and measurement procedures . 17
4.5.1 General . 17
4.5.2 Schedule of basic test groupings for acceptance and periodic tests . 17
4.6 Specifications . 18
4.6.1 Specification structures . 18
4.6.2 Sectional specification (SS) . 18
4.6.3 Detail specification (DS) . 18
4.6.4 Blank detail specification (BDS) . 18
4.6.5 Blank detail specification pro-forma for SQMA connectors . 20
5 Marking . 24
5.1 Marking of component . 24
5.2 Marking and contents of package . 25

Figure 1 – Connector with pin-centre contact (for dimensions and key, see Table 1) . 7
Figure 2 – Connector with socket-centre contact (for dimensions andkey, see Table 2) . 8
Figure 3 – Gauge pins for socket-centre contact (for dimensions, see Table 3) . 9
Figure 4 – Connector with pin-centre contact (for dimensions and key, see Table 4) . 10
Figure 5 – Connector with socket-centre contact (for dimensions and key, see Table 5) . 11

IEC 61169-45:2014 © IEC 2014 – 3 –
Table 1 – Dimensions of connector with pin-centre contact . 7
Table 2 – Dimensions of connector with socket-centre contact . 8
Table 3 – Dimensions of gauge pins for socket-centre contact . 9
Table 4 – Dimensions of connector with pin-centre contact . 10
Table 5 – Dimensions of connector with socket-centre contact . 11
Table 6 – Climatic categories . 12
Table 7 – Ratings and characteristics . 12
Table 8 – Acceptance tests . 15
Table 9 – Periodic tests . 16

– 4 – IEC 61169-45:2014 © IEC 2014
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 45: Sectional specification for SQMA
series quick lock RF coaxial connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.