Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

IEC 60512-16-6:2008 details a standard test method to assess the ability of terminations to withstand the mechanical stresses likely to be applied during normal assembly operations.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 16-6: Mechanische Prüfungen an Kontakten und Anschlüssen - Prüfung 16f: Mechanische Widerstandsfähigkeit von Anschlüssen

Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-6: Essais mécaniques des contacts et des sorties - Essai 16f: Robustesse des sorties

La CEI 60512-16-6:2008 détaille une méthode d'essai normalisée pour évaluer l'aptitude des sorties à résister aux contraintes mécaniques susceptibles d'être appliquées au cours d'un fonctionnement normal de l'ensemble.

Konektorji za elektronsko opremo - Preskusi in meritve - 16-6. del: Mehanski preskusi na kontaktih in priključkih - Preskus 16f: Čvrstost priključkov (IEC 60512-16-6:2008)

General Information

Status
Published
Publication Date
18-Sep-2008
Withdrawal Date
31-Jul-2011
ICS
31.220.10 - Plug-and-socket devices. Connectors
Technical Committee
CLC/SR 48B - Connectors
Drafting Committee
IEC/SC 48B - IEC_SC_48B
Parallel Committee
IEC/SC 48B - IEC_SC_48B
Current Stage
6060 - Document made available - Publishing
Start Date
19-Sep-2008
Completion Date
19-Sep-2008
Ref Project
SIST EN 60512-16-6:2008 - Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (IEC 60512-16-6:2008)

Relations

Refers
EN 60068-2-21:2006 - Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
Effective Date
03-Feb-2026
Refers
EN 60512-1-1:2002 - Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination
Effective Date
03-Feb-2026
Referred By
EN IEC 62282-2-100:2020 - Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
Effective Date
03-Feb-2026

Overview

EN 60512-16-6:2008 is a European standard developed by CLC that specifies test methods for evaluating the mechanical robustness of terminations in connectors used for electronic equipment. It forms part of the IEC 60512 series, focusing on mechanical tests applied to contacts and terminations. Specifically, Test 16f addresses the ability of terminations to endure mechanical stresses encountered during typical assembly processes. This standard ensures that electrical connectors meet quality requirements for durability and reliable mechanical performance, essential for maintaining connection integrity in electronic devices.

Key Topics

  • Scope and Purpose
    The standard applies to electrical connectors within the scope of IEC Technical Committee 48 and specifies testing procedures to assess termination robustness against mechanical stress during normal assembly operations.

  • Test Methodology
    The test follows procedures stipulated in IEC 60068-2-21 (Test U), with emphasis on mechanical challenges that terminations face. It includes preparation of specimens, mounting instructions, and criteria for passing the robustness test.

  • Visual Examination
    According to IEC 60512-1-1, visual inspections are conducted before and after testing to identify defects. There should be no damage that would impair the connector's function.

  • Specifications and Parameters
    The standard requires detail specifications to define necessary preconditioning, wiring arrangements, specimen mounting, number of specimens, and any deviations from the test method to accommodate specific connector designs.

Applications

  • Connector Quality Assurance
    EN 60512-16-6:2008 is crucial for manufacturers and quality control laboratories to verify the mechanical reliability of connector terminations, ensuring they withstand handling and assembly stresses without degradation.

  • Product Development and Testing
    The standard supports product design validation by providing repeatable methods to simulate real-world mechanical forces on terminations, promoting robust connector designs suitable for demanding electronic applications.

  • Compliance and Industry Standards
    Compliance with this standard aids manufacturers in meeting international market requirements, enhancing product acceptance and interoperability across industries such as consumer electronics, automotive, telecommunications, and industrial equipment.

Related Standards

  • IEC 60512-1-1
    Provides general examination and visual inspection guidelines for connectors, which form part of the pre- and post-test procedures in EN 60512-16-6.

  • IEC 60068-2-21
    Describes environmental testing methods including robustness of terminations and mounting devices, which form the foundation for the mechanical stress tests used in this standard.

  • IEC 60512 Series
    A broader collection of standards outlining tests and measurements for connectors in electronic equipment, covering electrical, mechanical, and environmental performance aspects.

Summary

EN 60512-16-6:2008 establishes a standardized mechanical testing framework for assessing the durability and robustness of terminations in electronic connectors. This standard is vital for ensuring connector reliability during assembly and operational use, supporting manufacturers and engineers in delivering high-quality, resilient electronic components. By adhering to internationally recognized test methods, organizations can enhance product integrity, reduce failure rates, and comply with essential industry requirements.

Frequently Asked Questions

EN 60512-16-6:2008 is a standard published by CLC. Its full title is "Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations". This standard covers: IEC 60512-16-6:2008 details a standard test method to assess the ability of terminations to withstand the mechanical stresses likely to be applied during normal assembly operations.

IEC 60512-16-6:2008 details a standard test method to assess the ability of terminations to withstand the mechanical stresses likely to be applied during normal assembly operations.

EN 60512-16-6:2008 is classified under the following ICS (International Classification for Standards) categories: 31.220.10 - Plug-and-socket devices. Connectors. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 60512-16-6:2008 has the following relationships with other standards: It is inter standard links to EN 60068-2-21:2006, EN 60512-1-1:2002, EN IEC 62282-2-100:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 60512-16-6:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2008
.RQHNWRUML]DHOHNWURQVNRRSUHPR3UHVNXVLLQPHULWYHGHO0HKDQVNL
SUHVNXVLQDNRQWDNWLKLQSULNOMXþNLK3UHVNXVIýYUVWRVWSULNOMXþNRY ,(&

Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical
tests on contacts and terminations - Test 16f: Robustness of terminations (IEC 60512-16
-6:2008)
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 16-6:
Mechanische Prüfungen an Kontakten und Anschlüssen - Prüfung 16f: Mechanische
Widerstandsfähigkeit von Anschlüssen (IEC 60512-16-6:2008)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-6: Essais
mécaniques des contacts et des sorties - Essai 16f: Robustesse des sorties (CEI 60512-
16-6:2008)
Ta slovenski standard je istoveten z: EN 60512-16-6:2008
ICS:
19.060 Mehansko preskušanje Mechanical testing
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60512-16-6
NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM
ICS 31.220.10
English version
Connectors for electronic equipment -
Tests and measurements -
Part 16-6: Mechanical tests on contacts and terminations -
Test 16f: Robustness of terminations
(IEC 60512-16-6:2008)
Connecteurs  Steckverbinder
pour équipements électroniques - für elektronische Einrichtungen -
Essais et mesures - Mess- und Prüfverfahren -
Partie 16-6: Essais mécaniques Teil 16-6: Mechanische Prüfungen
des contacts et des sorties - an Kontakten und Anschlüssen -
Essai 16f: Robustesse des sorties Prüfung 16f: Mechanische
(CEI 60512-16-6:2008) Widerstandsfähigkeit von Anschlüssen
(IEC 60512-16-6:2008)
This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-16-6:2008 E
Foreword
The text of document 48B/1887/FDIS, future edition 1 of IEC 60512-16-6, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-16-6 on 2008-08-01.
This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the
structure of the EN 60512 series.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2009-05-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-08-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60512-16-6:2008 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60512-16-6:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60068-2-21 2006 Environmental testing - EN 60068-2-21 2006
Part 2-21: Tests - Test U: Robustness of
terminations and integral mounting devices

1) 2)
IEC 60512-1-1 - Connectors for electronic equipment - Tests EN 60512-1-1 2002
and measurements -
Part 1-1: General examination - Test 1a:
Visual examination
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 60512-16-6
Edition 1.0 2008-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Tests and measurements –
Part 16-6: Mechanical tests on contacts and terminations – Test 16f:
Robustness of terminations
Connecteurs pour équipements électroniques – Essais et mesures –
Partie 16-6: Essais mécaniques des contacts et des sorties – Essai 16f:
Robustesse des sorties
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 31.220.10 ISBN 2-8318-9881-1
– 2 – 60512-16-6 © IEC:2008
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 16-6: Mechanical tests on contacts and terminations –
Test 16f: Robustness of terminations

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...