iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62676-2-33:2022

(Main)

Video surveillance systems for use in security applications - Part 2-33: Video transmission protocols - Cloud uplink and remote management system access

Video surveillance systems for use in security applications - Part 2-33: Video transmission protocols - Cloud uplink and remote management system access

This part of the IEC 62676 series specifies management systems interfaces and mechanism for remote operational access to physical security devices such as video surveillance devices and systems. For video surveillance, the use cases focus on accessing live video and retrieving recordings. The mechanism defined in this specification are not restricted to surveillance applications but also cover remote access to security systems and electronic access control systems. Configuration of devices and management systems is out of scope of this specification. Clause 4 introduces to remote management access. Clause 5 defines a set of requirements that the protocol needs to fulfil. Clause 6 extends the token-based resource-addressing scheme of the underlying specification IEC 60839-11-31. Clause 7 describes how to retrieve information about remote resources. Clause 8 defines how to connect to devices that are not directly reachable because they are e.g. located behind firewalls.

Videoüberwachungsanlagen für Sicherungsanwendungen - Teil 2-33: Cloud-Uplink und Fernzugriff von Managementsystemen

Systèmes de vidéosurveillance destinés à être utilisés dans les applications de sécurité - Partie 2-33: Protocoles de transmission vidéo - Liaison montante au nuage et accès au système de gestion à distance

IEC 62676-2-33:2022 spécifie les interfaces et les mécanismes des systèmes de gestion pour un accès opérationnel à distance aux dispositifs de sécurité physiques tels que les dispositifs et les systèmes de vidéosurveillance. Pour la vidéosurveillance, les cas d'utilisation concernent l'accès aux vidéos en direct et l'extraction des enregistrements. Les mécanismes définis dans le présent document ne se limitent pas aux applications de surveillance, mais couvrent également l'accès à distance aux systèmes de sécurité et aux systèmes de contrôle d'accès électronique. La configuration des dispositifs et des systèmes de gestion ne relève pas du domaine d'application du présent document.

Sistemi za videonadzor v varnostnih aplikacijah - 2-33. del: Protokoli video prenosa - Povezava do oblaka in oddaljen dostop do sistema upravljanja

Ta del skupine standardov IEC 62676 določa vmesnike sistemov upravljanja in mehanizem za oddaljen operativni dostop do fizičnih varnostnih naprav, kot so naprave in sistemi za videonadzor. Pri videonadzoru se primeri uporabe osredotočajo na dostop do videoposnetkov v živo in prenašanje posnetkov. Mehanizem, opredeljen v tej specifikaciji, ni omejen na aplikacije za videonadzor, temveč zajema tudi oddaljeni dostop do varnostnih sistemov in elektronskih sistemov za nadzor dostopa. Konfiguracija naprav in sistemov upravljanja ne spada na področje uporabe te specifikacije.
4. točka obravnava dostop za oddaljeno upravljanje. 5. točka določa zahteve, ki jih mora izpolnjevati protokol. 6. točka razširja shemo naslavljanja virov na osnovi žetonov, ki je obravnavana v osnovni specifikaciji IEC 60839-11-31. 7. točka opisuje, kako pridobiti informacije o oddaljenih virih. 8. točka določa, kako se povezati z napravami, ki niso neposredno dosegljive, ker so npr. za požarnimi zidovi.

General Information

Status
Published
Publication Date
15-Sep-2022
ICS
13.320 - Alarm and warning systems
Technical Committee
CLC/TC 79 - Alarm systems
Drafting Committee
IEC/TC 79 - IEC_TC_79
Current Stage
6060 - Document made available - Publishing
Start Date
16-Sep-2022
Completion Date
16-Sep-2022
Ref Project
SIST EN IEC 62676-2-33:2022 - Video surveillance systems for use in security applications - Part 2-33: Video transmission protocols - Cloud uplink and remote management system access

Buy Standard

EN IEC 62676-2-33:2022 - BARVEEN IEC 62676-2-33:2022 - BARVE
PreviousNext
Standard
EN IEC 62676-2-33:2022 - BARVE
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2022
Sistemi za videonadzor v varnostnih aplikacijah - 2-33. del: Protokoli video
prenosa - Povezava do oblaka in oddaljen dostop do sistema upravljanja
Video surveillance systems for use in security applications - Part 2-33: Video
transmission protocols - Cloud uplink and remote management system access
Systèmes de vidéosurveillance destinés à être utilisés dans les applications de sécurité -
Partie 2-33: Protocoles de transmission vidéo - Liaison montante au nuage et accès au
système de gestion à distance
Ta slovenski standard je istoveten z: EN IEC 62676-2-33:2022
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62676-2-33

NORME EUROPÉENNE
EUROPÄISCHE NORM September 2022
ICS 13.320
English Version
Video surveillance systems for use in security applications -
Part 2-33: Video transmission protocols - Cloud uplink and
remote management system access
(IEC 62676-2-33:2022)
Systèmes de vidéosurveillance destinés à être utilisés dans Videoüberwachungsanlagen für Sicherungsanwendungen -
les applications de sécurité - Partie 2-33: Protocoles de Teil 2-33: Cloud-Uplink und Fernzugriff von
transmission vidéo - Liaison montante au nuage et accès Managementsystemen
au système de gestion à distance (IEC 62676-2-33:2022)
(IEC 62676-2-33:2022)
This European Standard was approved by CENELEC on 2022-08-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62676-2-33:2022 E

European foreword
The text of document 79/658/FDIS, future edition 1 of IEC 62676-2-33, prepared by IEC/TC 79 "Alarm
and electronic security systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62676-2-33:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-05-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-08-26
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62676-2-33:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60839-11-32 NOTE Harmonized as EN 60839-11-32
IEC 60839-11-33 NOTE Harmonized as EN IEC 60839-11-33
IEC 62676-2-31 NOTE Harmonized as EN IEC 62676-2-31
IEC 62676-2-32 NOTE Harmonized as EN IEC 62676-2-32
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60839-11-31 - Alarm and electronic security systems - EN 60839-11-31 -
Part 11-31: Electronic access control systems
- Core interoperability protocol based on Web
services
IETF RFC 4122 - A Universally Unique IDentifier (UUID) URN - -
Namespace
IETF RFC 5246 - The Transport Layer Security (TLS) Protocol, - -
Version 1.2
IETF RFC 6125 - Representation and Verification of Domain- - -
Based Application Service Identity within
Internet Public Key Infrastructure Using X.509
(PKIX) Certificates in the Context of
Transport Layer Security (TLS)
IETF RFC 7540 - Hypertext Transfer Protocol Version 2 - -
(HTTP/2)
IEC 62676-2-33 ®
Edition 1.0 2022-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Video surveillance systems for use in security applications –

Part 2-33: Video transmission protocols – Cloud uplink and remote management

system access
Systèmes de vidéosurveillance destinés à être utilisés dans les applications de

sécurité –
Partie 2-33: Protocoles de transmission vidéo – Liaison montante au nuage et

accès au système de gestion à distance

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.320 ISBN 978-2-8322-3973-5

– 2 – IEC 62676-2-33:2022 © IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Overview . 8
4.1 General . 8
4.2 Remote access . 8
4.3 Cloud uplink . 9
5 Requirements . 10
5.1 General . 10
5.2 Functional requirements. 10
5.3 Protocol requirements . 11
6 Resource addressing . 11
6.1 Token based addressing . 11
6.2 Remote tokens . 12
6.3 Token context . 12
7 Resource queries . 12
7.1 General . 12
7.2 Resource event . 13
7.3 Location filter . 13
7.4 Prefix filter . 14
7.5 Scope filter . 14
7.6 Select filter . 14
7.7 Live checks . 15
7.8 Informative examples . 15
7.8.1 Live video . 15
7.8.2 Forensic . 15
8 Uplink . 16
8.1 Protocol . 16
8.1.1 Connection establishment . 16
8.1.2 Connection management . 16
8.1.3 Authentication . 17
8.1.4 HTTP/2 frames . 17
8.1.5 HTTP transactions . 17
8.2 Configuration interface . 17
8.2.1 Configuration parameters . 17
8.2.2 GetUplinks . 17
8.2.3 SetUplink . 18
8.2.4 DeleteUplink . 18
8.2.5 Capabilities . 18
Annex A (informative) Addressing scheme . 19
A.1 Overview . 19
A.2 Field definitions . 19
A.2.1 Zone code . 19
A.2.2 Agency code . 19

IEC 62676-2-33:2022 © IEC 2022 – 3 –
A.2.3 Device type code . 20
A.2.4 Serial number . 22
A.2.5 Examples . 22
Annex B (informative) APIs with token adaption . 24
B.1 General . 24
B.2 Consuming live video . 24
B.3 Controlling PTZ cameras . 24
B.4 Retrieving recordings . 24
B.5 Forwarding of events . 24
Bibliography . 25

Figure 1 – Hierarchical system example . 9
Figure 2 – Standard connection initiated from the clien
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62676-5-1:2024(Main)
Video surveillance systems for use in security applications - Part 5-1: Data specifications and image quality performance for camera devices - Environmental test methods for image quality performance
SIST EN IEC 62676-5-1:2024

IEC 62676-5-1:2024 defines measuring methods for performance values of video surveillance camera equipment and defines image quality tests under the given temperature and humidity environment. This document is mainly targeting cameras with integrated lenses as the lenses are a major component that can impact the results. If the lens is selectable, the lens will be stated together with the results.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62676-2-11:2024(Main)
Video Surveillance Systems (VSS) for use in security applications - Part 2-11: Video transmission protocols - Interop profiles for VMS and cloud VSaaS systems for safe cities and law enforcement
SIST EN IEC 62676-2-11:2024

IEC 62676-2-11:2024 defines minimum requirement profiles for Video Management Systems (VMS) and cloud Video-Surveillance-as-a-Service (VSaaS) Systems to optimize interfacing with third parties. It defines minimum required VMS interoperability levels from video export to exclusive video control, for the sake of remote support, for example in crisis situations, regulating governmental organizations, national law enforcement, private security service companies, public transport operators and other authorities. This document is intended to set the common technical basis for national regulations requiring inter-organizational remote, local or on-site access, for example so that authorities can be granted temporary access to the VSS in the case of emergency situations. This standard is accordingly expected to supersede ISO 22311 (Societal Security - Video-surveillance - Export interoperability).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50726-1:2024(Main)
Emergency and danger systems - Part 1: Emergency and danger response systems (EDRS) - Basic requirements, duties, responsibilities and activities
SIST EN 50726-1:2024

This document applies to the planning, installation, commissioning, operation and maintenance of an emergency and danger response system. An emergency and danger response system is part of an overall solution for dealing with specific events such as emergencies or crises. This document - specifies: - technical processes and responsibilities for supporting all procedures from the registration of an event (emergency, danger) up to its final processing; - the technical risk management including the definition of safety/security goals and the workflow organization as well as the necessary specifications regarding a technical risk management file; - associated duties, responsibilities and activities as parts of an integrated overall risk management process to achieve the safety and security goals, effectiveness and efficiency as well as data and system safety/security; - three different grades of safety/security, with the respective product functionalities required to achieve them; - the basic requirements for emergency and danger response systems (EDRS) in public buildings such as education facilities (e.g. schools, universities), government facilities, kindergartens and similar facilities; - the responsibilities under applicable national law about Safety and Health at Work Laws and thus particularly addresses the responsibility of employers; - describes: - the process of establishing, maintaining and updating a risk management file in which, inter alia, the technical risks are listed and evaluated and the residual technical risks are defined, resulting in the grade and structure of the EDRS; - is intended to support the implementation of: - National legal and other provisions (e.g. Act on Equal Opportunities for People with Disabilities, Safety and Health at Work Laws, education laws); - gives relevant guidance on: - the organizational risk management; - does not replace the specifications of standards to the following systems: - fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems, - security systems including, but not limited to, intrusion and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems, - applicable national standards on call systems. All such systems can, however, be integrated into an emergency and danger response system (EDRS), taking into account the relevant provisions made in the respective standards for such products and systems. Other products and systems from the entire field of standardization, such as alarm systems, danger warning and danger alarm systems, escape routing systems, public address systems used to respond to a danger, can also be used in or integrated into an emergency and danger response system if the relevant requirements of the standards for such products or systems are met. This document does not specify any risk levels, in particular no acceptable residual risks. Technical risk management and organizational risk management are equal parts of the overall risk management. This document is also applicable to non-public buildings with a similar risk and requirement for protection.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50518:2019/A1:2023(Amendment)
Monitoring and Alarm Receiving Centre
SIST EN 50518:2019/A1:2023

This document specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as a part of the total fire, safety and security solution. For the purpose of this document, the term “alarm” is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed firefighting systems, intrusion and hold-up alarm systems, access control systems, video surveillance systems, social alarms systems and combinations of such systems. This document gives requirements for two categories of ARC, category I and category II. A category I ARC will be designed, constructed and operated to a higher standard with respect to construction, security and integrity than a category II ARC. The categorization is determined according to the type(s) of alarm messages handled. Category I: ARCs handling messages from security applications: - I&HAS’s; - access control systems; - VSS in security applications that require an emergency response (for example loss prevention); - people monitoring, lone workers and object tracking systems for security applications; - alarm messages handled by category II ARCs; - combinations of the above systems. Category II: ARC’s handling messages from non-security applications: - fire alarm systems; - fixed firefighting systems; - social alarm systems; - audio/video door entry systems; - VSS in non-security applications (for example traffic flow); - people monitoring, lone workers and object tracking systems for non-security applications; - lifts emergency systems; - combinations of the above systems. The requirements apply to ARC’s (whether established in single or multiple sites) monitoring and processing alarms generated by systems installed at other locations and also to ARC’s monitoring solely alarms from systems within their own site. The document includes functional and specific requirements supporting the services of an ARC. The document does NOT apply to: - alarm systems used for non-civil purposes; - alarm systems for medical or health applications.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50136-2:2013/A1:2023(Amendment)
Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT)
SIST EN 50136-2:2013/A1:2023

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system. These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications. The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages. The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards. Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents. This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50136-10:2022(Main)
Alarm systems - Alarm transmission systems and equipment - Part 10: Requirements for remote access
SIST-TS CLC/TS 50136-10:2022

This document specifies minimum requirements for secure connection and session for remote access to one or more alarm systems, for example fire safety systems, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems, video surveillance systems, and social alarm systems. This document specifies the requirements for the performance, reliability, integrity, and security characteristics of a Remote Access Infrastructure. This document specifies the requirements for a Remote Access Infrastructure between a Remote Access Client and an alarm system at the supervised premises and may be either integrated as part of the ATS or a separate infrastructure. In either case, the requirements of this European technical specification should apply. This document does not cover the provision of functions and features on the alarm system.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62820-1-1:2016/A11:2021(Amendment)
Building intercom systems - Part 1-1: System requirements - General
SIST EN 62820-1-1:2017/A11:2022

IT NC submits to CLC TC79 the request for an amendment work of the EN 62820-1-1:2016, within CLC/TC 79/WG 15

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50131-2-3:2021(Main)
Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors
SIST EN 50131-2-3:2022

This document is for microwave detectors installed in buildings and provides for security grades 1 to 4 (see EN 50131 1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130 5). This document does not include requirements for detectors intended for use outdoors. The purpose of the detector is to emit microwave signals and analyse the signals that are returned to detect an intruder and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system. The grade-dependent requirements of this document apply and it is essential that a detector fulfils all the requirements of the specified grade. Functions additional to the mandatory functions specified in this document can be included in the detector, providing they do not influence the correct operation of the mandatory functions. Requirements for system interconnections are not included in this document.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60839-11-33:2021(Main)
Alarm and electronic security systems - Part 11-33: Electronic access control systems - Access control configuration based on Web services
SIST EN IEC 60839-11-33:2021

This part of IEC 60839 defines the Web services interface for electronic access control systems. This includes listing electronic access control system components, their logical composition, monitoring their states and controlling them. It also includes a mapping of mandatory and optional requirements in accordance with IEC 60839-11-1:2013, as covered by Annex B. This document applies to physical security only. Physical security prevents unauthorized personnel, attackers or accidental intruders from physically accessing a building, room, etc. Web services usage and device management functionality are outside the scope of this document. Refer to IEC 60839-11-31:2016 for more information. This document does not in any way limit a manufacturer to add other protocols or extend the protocol defined here. For rules on how to accomplish this, refer to IEC 60839-11-31:2016.

  • Standard
    185 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50134-5:2021(Main)
Alarm systems - Social alarm systems - Part 5: Interconnections and communications
SIST EN 50134-5:2021

This document specifies the minimum requirements for the performance, reliability and security characteristics of interconnections, alarm transmission systems and communications within a social alarm system.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day