CLC/TR 62453-51-20:2019

SLOVENSKI STANDARD
01-junij-2019
Specifikacija vmesnika orodja procesne naprave - 51-20. del: Implementacija
komunikacije za skupni model objekta - IEC 61784 CPF 2 (IEC/TR 62453-51-
20:2017)
Field device tool (FDT) interface specification - Part 51-20: Communication
implementation for common object model - IEC 61784 CPF 2 (IEC/TR 62453-51-
20:2017)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 51-20:
Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) -
Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784 (IEC/TR 62453-51-20:2017)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 51-20:
Mise en oeuvre d'un profil de communication pour le modèle d'objet commun - CPF 2 de
l'IEC 61784 (IEC/TR 62453-51-20:2017)
Ta slovenski standard je istoveten z: CLC/TR 62453-51-20:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT CLC/TR 62453-51-20

RAPPORT TECHNIQUE
TECHNISCHER BERICHT
February 2019
ICS 25.040.40; 35.110
English Version
Field device tool (FDT) interface specification - Part 51-20:
Communication implementation for common object model - IEC
61784 CPF 2
(IEC/TR 62453-51-20:2017)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 51-20: Mise en œuvre d'un profil de 51-20: Kommunikationsimplementierung mit dem
communication pour le modèle d'objet commun - CPF 2 de allgemeinen Objektmodell (COM) -
l'IEC 61784 Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784
(IEC/TR 62453-51-20:2017) (IEC/TR 62453-51-20:2017)

This Technical Report was approved by CENELEC on 2019-01-07.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC/TR 62453-51-20:2019 E

European foreword
This document (CLC/TR 62453-51-20:2019) consists of the text of the IEC/TR 62453-51-20:2017
prepared by IEC/TC 65 "Industrial-process measurement, control and automation".
Endorsement notice
The text of the International Standard IEC TR 62453-51-20:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61131-3:2013 NOTE  Harmonized as EN 61131-3:2013 (not modified).
IEC 61784-3-2 NOTE  Harmonized as EN 61784-3-2.
ISO/IEC 7498 (all parts) NOTE  Harmonized in EN ISO/IEC 7498-1 series.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-2 -  Industrial communication networks - Fieldbus EN 61158-2 -
specifications - Part 2: Physical layer
specification and service definition
IEC 61158-3-2 -  Industrial communication networks - Fieldbus EN 61158-3-2 -
specifications - Part 3-2: Data-lonk layer
service definition - Type 2 elements
IEC 61158-4-2 -  Industrial communication networks - Fieldbus EN 61158-4-2 -
specifications - Part 4-2: Data-link layer
protocol specification - Type 2 elements
IEC 61158-5-2 -  Industrial communication networks - Fieldbus EN 61158-5-2 -
specifications - Part 5-2: Application layer
service definition - Type 2 elements
IEC 61158-6-2 -  Industrial communication networks - Fieldbus EN 61158-6-2 -
specifications - Part 6-2: Application layer
protocol specification - Type 2 elements
IEC 61784-1 2014 Industrial communication networks - Profiles - EN 61784-1 2014
Part 1: Fieldbus profiles
IEC 61784-2 -  Industrial communication networks - Profiles - EN 61784-2 -
Part 2: Additional fieldbus profiles for real-
time networks based on ISO/IEC 8802-3
IEC 62026-3 -  Low-voltage switchgear and controlgear - - -
Controller-device interfaces (CDIs) - Part 3:
DeviceNet
IEC 62453-1 2016 Field device tool (FDT) interface specification EN 62453-1 2017
- Part 1: Overview and guidance
IEC 62453-2 2016 Field device tool (FDT) interface specification EN 62453-2 2017
- Part 2: Concepts and detailed description
IEC/TR 62453-41 2016 Field device tool (FDT) interface specification - -
- Part 41: Object model integration profile -
Common object model
IEC 62453-302 2016 Field device tool (FDT) interface specification EN 62453-302 2017
- Part 302: Communication profile integration
- IEC 61784 CPF 2
IEC TR 62453-51-20 ®
Edition 1.0 2017-06
TECHNICAL
REPORT
colour
inside
Field device tool (FDT) interface specification –

Part 51-20: Communication implementation for common object model –

IEC 61784 CPF 2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.110.05; 35.110 ISBN 978-2-8322-4315-2

– 2 – IEC TR 62453-51-20:2017 © IEC 2017

CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols, abbreviated terms and conventions . 7
3.1 Terms and definitions . 7
3.2 Symbols and abbreviated terms . 7
3.3 Conventions . 7
3.3.1 Data type names and references to data types . 7
3.3.2 Vocabulary for requirements . 7
4 Bus category . 8
5 Access to instance and device data . 8
6 Protocol specific behaviour . 8
7 Protocol specific usage of general data types . 8
8 Protocol specific common data types . 9
8.1 Common data types – DTMCIPDataTypeSchema . 9
8.2 Data types for Ethernet/IP – DTMEIPDataTypeSchema . 11
9 Network management data types . 13
9.1 General . 13
9.2 Node address . 13
9.3 Scanner/Master – Bus Parameter Set (CIP) –
FDTCIPDTMParameterSchema . 13
10 Communication data types. 19
11 Channel parameter data types . 20
12 Device identification . 21
12.1 Device type identification data types – FDTCIPIdentSchema . 21
12.2 Topology scan data types . 22
12.3 Scan identification data types – FDTCIPScanIdentSchema . 22
12.4 Device type identification data types – FDTCIPDeviceTypeIdentSchema . 22
Annex A (informative) Implementation hints . 24
A.1 XML Characters . 24
A.2 Support for FDT 1.2 . 24
A.3 Addressing examples in CompoNet DTMs . 24
A.4 Unique identification of a connection . 25
A.5 Relation between connections and device internal modularity . 25
A.6 Handling of process channels . 26
A.7 Identification of Modules in Modular Devices. 28
Bibliography . 29

Figure 1 – Part 51-20 of the IEC 62453 series . 5

Table 1 – Protocol specific usage of general attributes . 8

IEC TR 62453-51-20:2017 © IEC 2017 – 3 –

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 51-20: Communication implementation
for common object model – IEC 61784 CPF 2

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 62453-51-20, which is a technical report, has been prepared by subcommittee 65E:
Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-
process management, control and automation.
This document cancels and replaces IEC TR 62453-502 published in 2009. This edition
constitutes a technical revision. The main change consists in improved support for
Ethernet/IP.
– 4 – IEC TR 62453-51-20:2017 © IEC 2017

Each part of the IEC 62453-51-xy series is intended to be read in conjunction with its
corresponding part in the IEC 62453-3xy series. This document corresponds to
IEC 62453-302.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
65E/440/DTR 65E/514/RVC
Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The list of all parts of the IEC 62453 series, under the general title Field device tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
IEC TR 62453-51-20:2017 © IEC 2017 – 5 –

INTRODUCTION
This part of IEC 62453 is an interface specification for developers of Field Device Tool (FDT)
components for function control and data access within a client/server architecture. The
specification is a result of an analysis and design process to develop standard interfaces to
facilitate the development of servers and clients by multiple vendors that need to interoperate
seamlessly.
With the integration of fieldbuses into control systems, there are a few other tasks which need
to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate
these tools into higher-level system-wide planning or engineering tools. In particular, for use
in extensive and heterogeneous control systems, typically in the area of the process industry,
the unambiguous definition of engineering interfaces that are easy to use for all those
involved is of great importance.
A device-specific software component, called Device Type Manager (DTM), is supplied by the
field device manufacturer with its device. The DTM is integrated into engineering tools via the
FDT interfaces defined in this specification. The approach to integration is in general open for
all kind of fieldbuses and thus meets the requirements for integrating different kinds of
devices into heterogeneous control systems.
Figure 1 shows how this part of the IEC 62453-51-xy series is aligned in the structure of the
IEC 62453 series.
Part 51-20
Communication
Implementation
for common
object model –
IEC 61784 CPF 2
IEC
Figure 1 – Part 51-20 of the IEC 62453 series

– 6 – IEC TR 62453-51-20:2017 © IEC 2017

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 51-20: Communication implementation
for common object model – IEC 61784 CPF 2

1 Scope
This part of the IEC 62453-51-xy series, which is a Technical Report, provides information for
integrating the CIP™ technology into the COM-based implementation of FDT interface
specification (IEC TR 62453-41).
The Communication Profile Family 2 (commonly known as CIP™ ) defines communication
profiles based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, and
IEC 61158-6-2, IEC 62026-3. The basic profiles CP 2/1 (ControlNet™), CP 2/2
(EtherNet/IP™ ), and CP 2/3 (DeviceNet™ ) are defined in IEC 61784-1 and IEC 61784-2. An
additional communication profile (CompoNet™),also based on CIP™, is defined in [15] .
This document specifies implementation of communication and other services based on
IEC 62453-302.
This document neither contains the FDT specification nor modifies it.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 61158-2, Industrial communication networks – Fieldbus specifications – Part 2: Physical
layer specification and service definition
IEC 61158-3-2, Industrial communication networks – Fieldbus specifications – Part 3-2: Data-
link layer service definition – Type 2 elements
IEC 61158-4-2, Industrial communication networks – Fieldbus specifications – Part 4-2: Data-
link layer protocol specification – Type 2 elements
___________
CIP™ (Common Industrial Protocol), DeviceNet™ and CompoNet™ are trade names of Open DeviceNet Vendor
Association, Inc (ODVA). This information is given for the convenience of users of this document and does not
constitute an endorsement by IEC of the trade name holder or any of its products. Compliance to this profile
does not require use of the trade names CIP™, DeviceNet™ or CompoNet™. Use of the trade names CIP™,
DeviceNet™ or CompoNet™ requires permission of Open DeviceNet Vendor Association,Inc.
ControlNet™ is a trade name of ControlNet International, Ltd. This information is given for the convenience of
users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its
products. Compliance to this profile does not require use of the trade name ControlNet™. Use of the trade
name ControlNet™ requires permission of ControlNet International, Ltd.
EtherNet/IP™ is a trade name of ControlNet International, Ltd. and Open DeviceNet Vendor Association, Inc.
This information is given for the convenience of users of this document and does not constitute an endorsement
by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the
trade name EtherNet/IP™. Use of the trade name EtherNet/IP™ requires permission of either ControlNet
International, Ltd. or Open DeviceNet Vendor Association, Inc.
Figures in square brackets refer to the Bibliography.

IEC TR 62453-51-20:2017 © IEC 2017 – 7 –

IEC 61158-5-2, Industrial communication networks – Fieldbus specifications – Part 5-2:
Application layer service definition – Type 2 elements
IEC 61158-6-2, Industrial communication networks – Fieldbus specifications – Part 6-2:
Application layer protocol specification – Type 2 elements
IEC 61784-1:2014, Industrial communication networks – Profiles – Part 1: Fieldbus profiles
IEC 61784-2, Industrial communication networks – Profiles – Part 2: Additional fieldbus
profiles for real-time networks based on ISO/IEC 8802-3
IEC 62026-3, Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) –
Part 3: DeviceNet
IEC 62453-1:2016, Field device tool (FDT) interface specification – Part 1: Overview and
guidance
IEC 62453-2:2016, Field device tool (FDT) interface specification – Part 2: Concepts and
detailed description
IEC TR 62453-41:2016, Field device tool (FDT) interface specification – Part 41: Object model
integration profile – Common object model
IEC 62453-302:2016, Field device tool (FDT) interface specification – Part 302:
Communication profile integration – IEC 61784 CPF 2
3 Terms, definitions, symbols, abbreviated terms and conventions
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62453-1,
IEC 62453-2, IEC TR 62453-41, and IEC 62453-301 apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.2 Symbols and abbreviated terms
For the purposes of this document, the symbols and abbreviations given in IEC 62453-1,
IEC 62453-2, IEC 62453-302, and IEC TR 62453-41 apply.
3.3 Conventions
3.3.1 Data type names and references to data types
The conventions for naming and referencing of data types are explained in IEC 62453-2:2016,
Clause A.1.
3.3.2 Vocabulary for requirements
The following expressions are used when specifying requirements.
Usage of “shall” or “mandatory” No exceptions allowed.

– 8 – IEC TR 62453-51-20:2017 © IEC 2017

Usage of “should” or “recommended” Strong recommendation. It may make sense in
special exceptional cases to differ from the
described behaviour.
Usage of “can” or “optional” Function or behaviour may be provided,
depending on defined conditions.
4 Bus category
IEC 61784 CPF 2 protocol is identified in the attribute busCategory of the BusCategory
element by the identifiers, as specified in IEC 62453-302.
5 Access to instance and device data
The elements and attributes specified in this clause are used at the following methods:
• IDtmParameter methods
• IDtmSingleDeviceDataAccess methods
• IDtmSingleInstanceDataAccess methods
All parameters defined in the Params section of the EDS shall be exposed. For
IdtmParameter, the parameters are exposed in the ExportedVariables element of the
DtmParameter schema.
6 Protocol specific behaviour
IEC 61784 CPF 2 protocol specific requirements are specified in IEC 62453-302.
7 Protocol specific usage of general data types
Table 1 shows how general attributes are used with IEC 61784 CPF 2 devices.
Table 1 – Protocol specific usage of general attributes
Attribute Description for use
fdt:address All these attributes of the FDTDatatype schema are
used as defined in IEC 62453-302.
fdt:protocolId
fdt:deviceTypeId
fdt:deviceTypeInformation
fdt:deviceTypeInformationPath
fdt:manufacturerId
fdt:semanticId
fdt:applicationDomain
fdt:tag
IEC TR 62453-51-20:2017 © IEC 2017 – 9 –

8 Protocol specific common data types
8.1 Common data types – DTMCIPDataTypeSchema
This schema specifies the protocol specific common XML elements and attributes, which are
used in other schemas. The definition of the elements and attributes follows the data type
definitions in IEC 62453-302.





























































– 10 – IEC TR 62453-51-20:2017 © IEC 2017




























































IEC TR 62453-51-20:2017 © IEC 2017 – 11 –

8.2 Data types for Ethernet/IP – DTMEIPDataTypeSchema
This schema specifies the protocol specific common XML elements and attributes for
Ethernet/IP, which are used in other schemas. The definition of the elements and attributes
follows the data type definitions in IEC 62453-302.






























































– 12 – IEC TR 62453-51-20:2017 © IEC 2017

































































IEC TR 62453-51-20:2017 © IEC 2017 – 13 –






























9 Network management data types
9.1 General
The elements and attributes specified in this clause are used at the following methods:
• IDtmParameter:GetParameters
• IDtmParameter:SetParameters
9.2 Node address
The CIPNodeID will be stored in the busAddress attribute of the fdt:MasterSlaveBus element.
This is not used for CompoNet because the master has a fixed address – since this is a
mandatory element, the recommendation is to use the value “0”.
9.3 Scanner/Master – Bus Parameter Set (CIP) – FDTCIPDTMParameterSchema
Information is sent to the CIP scanner/master within the UserDefinedBus element in the
BusInformation element, using the CIPNode element defined in the schema below. This
information shall be set to configure the scan list of scanner/master.


xmlns:dt="urn:schemas-microsoft-com:datatypes" xmlns:fdt="x-schema:FDTDataTypesSchema.xml" xmlns:cip="x-
schema:DTMCIPDataTypeSchema.xml" xmlns:fdtpar="x-schema:DTMParameterSchema.xml">








– 14 – IEC TR 62453-51-20:2017 © IEC 2017