EN 62287-2:2017

SLOVENSKI STANDARD
01-julij-2017
1DGRPHãþD
SIST EN 62287-2:2013
3RPRUVNDQDYLJDFLMVNDLQUDGLRNRPXQLNDFLMVNDRSUHPDLQVLVWHPL/DGLMVND
RSUHPDUD]UHGD%DYWRPDWLþQHJDLGHQWLILNDFLMVNHJDVLVWHPD$,6GHO7HKQLNH
VDPRRUJDQL]LUDQHJDþDVRYQRSRUD]GHOMHQHJDVRGRVWRSD627'0$,(&

Maritime navigation and radiocommunication equipment and systems - Class B
shipborne equipment of the automatic identification system (AIS) - Part 2: Self-organising
time division multiple access (SOTDMA) techniques (IEC 62287-2:2017)
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt –
Geräte der Klasse B des automatischen Identifikationssystems (AIS) für Schiffe – Teil 2:
Sich selbst abstimmende Zeitmultiplex-Vielfachzugriffstechniken (SOTDMA) (IEC 62287-
2:2017)
Matériels et systèmes de navigation et de radiocommunications maritimes -
Transpondeur embarqué du système d'identification automatique (AIS) de classe B -
Partie 2: Technique d'accès multiple par répartition dans le temps auto-adaptatif
(SOTDMA) (IEC 62287-2:2017)
Ta slovenski standard je istoveten z: EN 62287-2:2017
ICS:
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62287-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2017
ICS 47.020.70 Supersedes EN 62287-2:2013
English Version
Maritime navigation and radiocommunication equipment and
systems - Class B shipborne equipment of the automatic
identification system (AIS) - Part 2: Self-organising time division
multiple access (SOTDMA) techniques
(IEC 62287-2:2017)
Matériels et systèmes de navigation et de Navigations- und Funkkommunikationsgeräte und -systeme
radiocommunications maritimes - Transpondeur embarqué für die Seeschifffahrt - Geräte der Klasse B des
du système d'identification automatique (AIS) de classe B - automatischen Identifikationssystems (AIS) für Schiffe - Teil
Partie 2: Technique d'accès multiple par répartition dans le 2: Sich selbst abstimmende Zeitmultiplex-
temps auto-adaptatif (SOTDMA) Vielfachzugriffstechniken (SOTDMA)
(IEC 62287-2:2017) (IEC 62287-2:2017)
This European Standard was approved by CENELEC on 2017-03-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62287-2:2017 E
European foreword
The text of document 80/827/FDIS, future edition 2 of IEC 62287-2, prepared by IEC/TC 80 "Maritime
navigation and radiocommunication equipment and systems" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 62287-2:2017.

The following dates are fixed:
(dop) 2017-12-14
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-03-14
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62287-2:2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62287-2:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61162-3:2008 NOTE Harmonized as EN 61162-3:2008.
IEC 61162-3:2008/AMD1:2010 NOTE Harmonized as EN 61162-3:2008/A1:2010.
IEC 61162-3:2008/AMD2:2014 NOTE Harmonized as EN 61162-3:2008/A2:2014.
IEC 61924-2:2012 NOTE Harmonized as EN 61924-2:2012.
IEC 62287-1 NOTE Harmonized as EN 62287-1.
ISO 9000 (Series) NOTE Harmonized as EN ISO 9000 (Series).

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60945 2002 Maritime navigation and EN 60945 2002
radiocommunication equipment and
systems - General requirements - Methods
of testing and required test results
IEC 61108 series Maritime navigation and EN 61108 series
radiocommunication equipment and
systems - Global navigation satellite
systems (GNSS)
IEC 61108-4 -  Maritime navigation and EN 61108-4 -
radiocommunication equipment and
systems - Global navigation satellite
systems (GNSS) - Part 4: Shipborne
DGPS and DGLONASS maritime radio
beacon receiver equipment - Performance
requirements, methods of testing and
required test results
IEC 61162-1 -  Maritime navigation and EN 61162-1 -
radiocommunication equipment and
systems - Digital interfaces - Part 1: Single
talker and multiple listeners
IEC 61993-2 -  Maritime navigation and EN 61993-2 -
radiocommunication equipment and
systems - Automatic Identification Systems
(AIS) - Part 2: Class A shipborne
equipment of the automatic identification
system (AIS) - Operational and
performance requirements, methods of test
and required test results
ITU Radio -  Radio Regulations - Volume 1: Articles - -
regulations, Vol 1
ITU-R -  Interim solutions for improved efficiency in - -
Recommendation the use of the band 156-174 MHz by
M.1084-5 stations in the maritime mobile service
ITU-R -  Technical characteristics for an automatic - -
Recommendation identification system using time-division
M.1371-5 multiple access in the VHF maritime mobile
band
ITU-R -  Characteristics of a transponder system - -
Recommendation using digital selective calling techniques for
M.825-3 use with vessel traffic services and ship-to-
ship identification
IEC 62287-2 ®
Edition 2.0 2017-02
INTERNATIONAL
STANDARD
colour
inside
Maritime navigation and radiocommunication equipment and systems – Class B

shipborne equipment of the automatic identification system (AIS) –

Part 2: Self-organising time division multiple access (SOTDMA) techniques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 47.020.70 ISBN 978-2-8322-3906-3

– 2 – IEC 62287-2:2017 © IEC 2017

CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms, definitions and abbreviated terms . 11
3.1 Terms and definitions . 11
3.2 Abbreviated terms . 11
4 General requirements . 12
4.1 General . 12
4.1.1 Capabilities of the Class B "SO" AIS . 12
4.1.2 Quality assurance . 12
4.1.3 Safety of operation . 13
4.1.4 Additional features . 13
4.1.5 Functionality . 13
4.2 Manuals . 13
4.3 Marking and identification . 13
5 Environmental, power supply, interference and safety requirements . 13
6 Performance requirements. 14
6.1 Internal processes . 14
6.2 Operating frequency channels . 15
6.3 Internal GNSS receiver for position reporting . 15
6.4 Identification . 15
6.5 AIS Information . 15
6.5.1 Information content . 15
6.5.2 Information reporting intervals . 16
6.5.3 Short safety-related messages . 17
6.5.4 Permissible initialisation period . 17
6.6 Alarms and indications, fall-back arrangements . 17
6.6.1 Built-in integrity tests (BIIT) . 17
6.6.2 Transmitter shutdown procedure . 18
6.6.3 Position sensor fallback conditions . 19
6.7 User interface . 19
6.7.1 Indication and display . 19
6.7.2 Static data input . 20
6.7.3 External interfaces . 20
6.8 Protection from invalid control commands . 20
7 Technical requirements . 20
7.1 General . 20
7.2 Physical layer . 21
7.2.1 General . 21
7.2.2 Receiver characteristics. 21
7.2.3 Other characteristics . 22
7.2.4 Transmitter requirements . 23
7.3 Link layer . 24
7.3.1 General . 24
7.3.2 Link sub-layer 1: medium access control (MAC). 24
7.3.3 Link sub-layer 2: data link service (DLS) . 26

IEC 62287-2:2017 © IEC 2017 – 3 –
7.3.4 Link sub-layer 3: link management entity (LME) . 26
7.4 Network layer . 30
7.4.1 Gener
...