EN 60811-510:2012

SLOVENSKI STANDARD
01-september-2012
(OHNWULþQLLQRSWLþQLNDEOL3UHVNXãHYDOQHPHWRGH]DQHNRYLQVNHPDWHULDOH
GHO0HKDQVNLSUHVNXVL0HWRGHVSHFLILþQH]DSROLHWLOHQVNHLQSROLSURSLOHQVNH
]PHVL3UHVNXV]RYLMDQMHPSRWHUPLþQHPVWDUDQMXQD]UDNX
Electric and optical fibre cables - Test methods for non-metallic materials - Part 510:
Mechanical tests - Methods specific to polyethylene and polypropylene compounds -
Wrapping test after thermal ageing in air
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 510: Mechanische Prüfungen - Verfahren speziell für Polyethylen- und
Polypropylenmischungen - Wickelprüfung nach thermischer Alterung in Luft
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non
-métalliques - Partie 510: Essais mécaniques - Méthodes spécifiques pour les mélanges
de polyéthylène et de polypropylène - Essai d'enroulement après vieillissement
thermique dans l'air
Ta slovenski standard je istoveten z: EN 60811-510:2012
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60811-510
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 29.035.01; 29.060.20 Supersedes EN 60811-4-2:2004 (partially)

English version
Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 510: Mechanical tests -
Methods specific to polyethylene and polypropylene compounds -
Wrapping test after thermal ageing in air
(IEC 60811-510:2012)
Câbles électriques et câbles à fibres Kabel, isolierte Leitungen
optiques - und Glasfaserkabel -
Méthodes d'essai pour les matériaux Prüfverfahren für nichtmetallene
non-métalliques - Werkstoffe -
Partie 510: Essais mécaniques - Teil 510: Mechanische Prüfungen -
Méthodes spécifiques pour les mélanges Verfahren speziell für Polyethylen- und
polyéthylène et polypropylène - Polypropylenmischungen -
Essai d'enroulement après vieillissement Wickelprüfung nach thermischer Alterung
thermique dans l'air in Luft
(CEI 60811-510:2012) (IEC 60811-510:2012)

This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-510:2012 E
Foreword
The text of document 20/1306/FDIS, future edition 1 of IEC 60811-510, prepared by IEC/TC 20
"Electric cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2013-01-17
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-04-17
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes Clause 10 of EN 60811-4-2:2004 (partially). Full details of the
replacements are shown in Annex A of EN 60811-100:2012.
There are no specific technical changes with respect to EN 60811-4-2:2004, but see the Foreword to
EN 60811-100:2012.
This standard is to be read in conjunction with EN 60811-100.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 60811-510:2012 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 60811-4-2:2004 NOTE Harmonized as EN 60811-4-2:2004 (not modified).

- 3 - EN 60811-510:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60811-100 2012 Electric and optical fibre cables - Test EN 60811-100 2012
methods for non-metallic materials -
Part 100: General
IEC 60811-510 ®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric and optical fibre cables – Test methods for non-metallic materials –

Part 510: Mechanical tests – Methods specific to polyethylene and

polypropylene compounds – Wrapping test after thermal ageing in air

Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux

non-métalliques –
Partie 510: Essais mécaniques – Méthodes spécifiques pour les mélanges

polyéthylène et polypropylène – Essai d'enroulement après vieillissement

thermique dans l'air
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX H
ICS 29.035.01; 29.060.20 ISBN 978-2-88912-987-4

– 2 – 60811-510  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test method . 6
4.1 General . 6
4.2 Apparatus . 6
4.3 Sampling . 6
4.4 Ageing procedure . 7
4.5 Test procedure . 7
4.6 Evaluation of results . 7
5 Test report. 7
Bibliography . 8

60811-510  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –

Part 510: Mechanical tests –
Methods specific to polyethylene and polypropylene compounds –
Wrapping test after thermal ageing in air
...