EN 61347-2-3:2011/AC:2011
(Corrigendum)Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
This part of IEC 61347 specifies particular safety requirements for electronic control gear for use on a.c. and d.c. supplies up to 1000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. Performance requirements are the subject of IEC 60929. Particular requirements for electronic control gear with means protection against overheating are given in Annex C. For emergency lighting operation, particular requirements for control gear operated from a central supply are given in Annex J. Performance requirements appropriate to the safe operation of emergency lighting are also contained in Annex J. Requirements for emergency lighting control gear operating from non-centralised power supplies are given in IEC 61347-2-7.
Geräte für Lampen - Teil 2-3: Besondere Anforderungen an wechsel- und/oder gleichstromversorgte elektronische Betriebsgeräte für Leuchtstofflampen
Appareillages de lampes - Partie 2-3: Exigences particulières pour les appareillages électroniques alimentés en courant alternatif et/ou en courant continu pour lampes fluorescentes
Krmilne stikalne naprave za sijalke - 2-3. del: Posebne zahteve za izmenično napajane elektronske predstikalne naprave za fluorescenčne sijalke
Ta del IEC 61347 določa posebne varnostne zahteve za elektronske predstikalne naprave z izmeničnim in enosmernim napajanjem, manjšim od 1000 V, in pri 50 Hz ali 60 Hz s frekvencami delovanja, ki odstopajo od napajalne frekvence, povezanimi s fluorescenčnimi sijalkami, kot je določeno v IEC 60081 in IEC 60901, in z drugimi fluorescenčnimi sijalkami za visokofrekvenčno delovanje. Zahteve za zmogljivost so predmet IEC 60929. Določene zahteve za elektronske predstikalne naprave s sredstvi zaščite pred pregrevanjem so podane v dodatku C. V dodatku J so podane nekatere zahteve za elektronske predstikalne naprave, ki pri zasilni razsvetljavi delujejo iz osrednjega napajanja. Zahteve za zmogljivost, primerne za varno delovanje zasilne razsvetljave, so prav tako zajete v dodatku J. Zahteve za elektronske predstikalne naprave, ki pri zasilni razsvetljavi delujejo iz neosrednjega napajanja, so podane v IEC 61347-2-7.
General Information
- Status
- Published
- Publication Date
- 27-Oct-2011
- Technical Committee
- CLC/TC 34 - 'Lamps and related equipment
- Drafting Committee
- CLC/TC 34 - 'Lamps and related equipment
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 28-Oct-2011
- Completion Date
- 28-Oct-2011
Relations
- Effective Date
- 23-Jan-2023
- Effective Date
- 28-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 61347-2-3:2011/AC:2011 is a corrigendum published by CLC. Its full title is "Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps". This standard covers: This part of IEC 61347 specifies particular safety requirements for electronic control gear for use on a.c. and d.c. supplies up to 1000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. Performance requirements are the subject of IEC 60929. Particular requirements for electronic control gear with means protection against overheating are given in Annex C. For emergency lighting operation, particular requirements for control gear operated from a central supply are given in Annex J. Performance requirements appropriate to the safe operation of emergency lighting are also contained in Annex J. Requirements for emergency lighting control gear operating from non-centralised power supplies are given in IEC 61347-2-7.
This part of IEC 61347 specifies particular safety requirements for electronic control gear for use on a.c. and d.c. supplies up to 1000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. Performance requirements are the subject of IEC 60929. Particular requirements for electronic control gear with means protection against overheating are given in Annex C. For emergency lighting operation, particular requirements for control gear operated from a central supply are given in Annex J. Performance requirements appropriate to the safe operation of emergency lighting are also contained in Annex J. Requirements for emergency lighting control gear operating from non-centralised power supplies are given in IEC 61347-2-7.
EN 61347-2-3:2011/AC:2011 is classified under the following ICS (International Classification for Standards) categories: 29.140.99 - Other standards related to lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 61347-2-3:2011/AC:2011 has the following relationships with other standards: It is inter standard links to EN IEC 61347-2-3:2024, EN 61347-2-3:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 61347-2-3:2011/AC:2011 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 2014/53/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 61347-2-3:2011/AC:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HGeräte für Lampen - Teil 2-3: Besondere Anforderungen an wechsel- und/oder gleichstromversorgte elektronische Betriebsgeräte für LeuchtstofflampenAppareillages de lampes - Partie 2-3: Exigences particulières pour les appareillages électroniques alimentés en courant alternatif et/ou en courant continu pour lampes fluorescentesLamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps29.140.99Drugi standardi v zvezi z žarnicamiOther standards related to lamps29.130.01Stikalne in krmilne naprave na splošnoSwitchgear and controlgear in generalICS:Ta slovenski standard je istoveten z:EN 61347-2-3:2011/AC:2011SIST EN 61347-2-3:2011/AC:2012en,fr,de01-januar-2012SIST EN 61347-2-3:2011/AC:2012SLOVENSKI
STANDARD
SIST EN 61347-2-3:2011
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...