EN 61347-2-7:2012/A2:2022

SLOVENSKI STANDARD
01-september-2022
Stikalne naprave za sijalke - 2-7. del: Posebne zahteve za električni vir za
varnostne storitve (ESSS) napajane elektronske predstikalne naprave za zasilno
razsvetljavo - Dopolnilo A2 (IEC 61347-2-7/AMD2:2021)
Lamp controlgear - Part 2-7: Particular requirements for electric source for safety
services (ESSS) supplied electronic controlgear for emergency lighting (self-contained)
(IEC 61347-2-7/AMD2:2021)
Geräte für Lampen - Teil 2-7: Besondere Anforderungen an batterieversorgte
elektronische Betriebsgeräte für die Notbeleuchtung (mit Einzelbatterie) (IEC 61347-2-
7/AMD2:2021)
Appareillages de lampes - Partie 2-7: Exigences particulières relatives aux appareillages
électroniques alimentés par batterie pour l'éclairage de secours (autonome) (IEC 61347-
2-7/AMD2:2021)
Ta slovenski standard je istoveten z: EN 61347-2-7:2012/A2:2022
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61347-2-7:2012/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM June 2022
ICS 29.140.99
English Version
Lamp controlgear - Part 2-7: Particular requirements for electric
source for safety services (ESSS) supplied electronic
controlgear for emergency lighting (self-contained)
(IEC 61347-2-7/AMD2:2021)
Appareillages de lampes - Partie 2-7: Exigences Geräte für Lampen - Teil 2-7: Besondere Anforderungen an
particulières relatives aux appareillages électroniques batterieversorgte elektronische Betriebsgeräte für die
alimentés par source électrique de sécurité (ESSS) pour Notbeleuchtung (mit Einzelbatterie)
l'éclairage de secours (autonome) (IEC 61347-2-7/AMD2:2021)
(IEC 61347-2-7/AMD2:2021)
This amendment A2 modifies the European Standard EN 61347-2-7:2012; it was approved by CENELEC on 2022-02-16. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61347-2-7:2012/A2:2022 E

European foreword
The text of document 34C/1536/FDIS, future IEC 61347-2-7/AMD2, prepared by SC 34C "Auxiliaries
for lamps" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61347-2-7:2012/A2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-12-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-06-24
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an
integral part of EN 61347-2-7:2012/A1:2019.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61347-2-7/AMD2:2021 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Replace Annex ZA of EN 61347-2-7:2012 by the following:
Publication Year Title EN/HD Year
IEC 60081 - Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
EN 60081:1998/A1 2002
EN 60081:1998/A2 2003
EN 60081:1998/A3 2005
EN 60081:1998/A4 2010
EN 60081:1998/A5 2013
EN 60081:1998/A6 2017
+ A11 2018
IEC 60598-2-22 2021 Luminaires - Part 2-22: Particular EN IEC 60598-2-22 2022
requirements - Luminaires for emergency
lighting
IEC 60901 - Single-capped fluorescent lamps - EN 60901 1996
Performance specifications
EN 60901:1996/A1 1997
EN 60901:1996/A2 2000
EN 60901:1996/A3 2004
EN 60901:1996/A4 2008
EN 60901:1996/A5 2012
EN 60901:1996/A6 2017
IEC 60921 - Ballasts for tubular fluorescent lamps - EN 60921 2004
Performance requirements
EN 60921:2004/A1 2006
Publication Year Title EN/HD Year
IEC 60929 - AC and/or DC-supplied electronic control EN 60929 2011
gear for tubular fluorescent lamps -
Performance requirements
+ AC 2011
EN 60929:2011/A1 2016
IEC 61347-1 2015 Lamp controlgear - Part 1: General and EN 61347-1 2015
safety requirements
+ A1 2017 + A1 2021
IEC 61347-2-3 - Lamp control gear - Part 2-3: Particular EN 61347-2-3 2011
requirements for a.c. and/or d.c. supplied
electronic control gear for fluorescent
lamps
+ AC 2011
+ A1 2017
IEC 61558-1 2005 Safety of power transformers, power EN 61558-1 2005
supplies, reactors and similar products --
Part 1: General requirements and tests
+ A1 2009 + A1 2009
IEC 61558-2-1 2007 Safety of power transformers, power EN 61558-2-1 2007
supplies, reactors and similar products -
Part 2-1: Particular requirements and
tests for separating transformers and
power supplies incorporating separating
transformers for general applications
IEC 61558-2-6 2009 Safety of transformers, reactors, power EN 61558-2-6 2009
supply units and similar products for
supply voltages up to 1 100 V - Part 2-6:
Particular requirements and tests for
safety isolating transformers and power
supply units incorporating safety isolating
transformers
IEC 61558-2-16 2009 Safety of transformers, reactors, power EN 61558-2-16 2009
supply units and similar products for
supply voltages up to 1 100 V - Part 2-
16: Particular requirements and tests for
switch mode power supply units and
transformers for switch mode power
supply units
IEC 62034 - Automatic test systems for battery EN 62034 2012
powered emergency escape lighting

IEC 61347-2-7 ®
Edition 3.0 2021-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Lamp controlgear –
Part 2-7: Particular requirements for electric source for safety services (ESSS)

supplied electronic controlgear for emergency lighting (self-contained)

Appareillages de lampes –
Partie 2-7: Exigences particulières relatives aux appareillages électroniques

alimentés par source électrique de sécurité (ESSS) pour l'éclairage de secours

(autonome)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-1054-2

– 2 – IEC 61347-2-7:2011/AMD2:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LAMP CONTROLGEAR –
Part 2-7: Particular requirements for electric source for safety services
(ESSS) supplied electronic controlgear for emergency lighting
(self-contained)
AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to IEC 61347-2-7:2011 has been prepared by subcommittee 34C: Auxiliaries for
lamps, of IEC technical committee 34: Lighting.
The text of this Amendment is based on the following documents:
Draft Report on voting
34C/1536/FDIS 34C/1540/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.

IEC 61347-2-7:2011/AMD2:2021 – 3 –
© IEC 2021
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Title of Part 2-7
In the existing title, replace "battery" with "electric source for safety services (ESSS)" as follows:
Part 2-7: Particular requirements for electric source for sa
...