Fibre optic connector interfaces - Part 7: Type MPO connector family

Defines the standard interface dimensions for type MPO family of connectors.

Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 7: Bauart MPO Steckverbinderfamilie

Interfaces de connecteurs pour fibres optiques - Partie 7: Famille de connecteurs de type MPO

Définit les dimensions d'interface normalisées pour la famille de connecteurs de type MPO.

Spojni vmesniki optičnih vlaken – 7. del: Družina spojnikov tipa MPO (IEC 61754-7:2004)

General Information

Status
Withdrawn
Publication Date
02-Feb-2005
Withdrawal Date
30-Nov-2007
ICS
33.180.20 - Fibre optic interconnecting devices
Technical Committee
CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
Drafting Committee
IEC/SC 86B - IEC_SC_86B
Parallel Committee
IEC/SC 86B - IEC_SC_86B
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Apr-2011
Completion Date
01-Apr-2011
Ref Project
SIST EN 61754-7:2005 - Fibre optic connector interfaces -- Part 7: Type MPO connector family

Relations

Replaces
EN 186290:1997 - Sectional Specification: Connector sets for optical fibres and cables - Type MPO
Effective Date
29-Jan-2023
Replaced By
EN 61754-7:2008 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family
Effective Date
29-Jan-2023
Referred By
EN 60874-1:2012 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
Effective Date
03-Feb-2026
Referred By
EN IEC 62148-22:2023 - Fibre optic active components and devices - Package and interface standards - Part 22: 25 Gbit/s directly modulated laser packages with temperature control unit
Effective Date
03-Feb-2026
Referred By
EN 61753-121-2:2017 - Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
Effective Date
03-Feb-2026
Referred By
EN 62148-15:2010 - Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages
Effective Date
03-Feb-2026
Referred By
EN 61300-3-22:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force
Effective Date
03-Feb-2026
Referred By
EN IEC 61757-1-1:2020 - Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings
Effective Date
03-Feb-2026
Referred By
EN 61753-121-2:2010 - Fibre optic interconnecting devices and passive components - Performance standards - Part 121-2: Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C - Controlled environment
Effective Date
03-Feb-2026
Referred By
EN 61300-3-33:2012 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
Effective Date
03-Feb-2026
Referred By
EN IEC 62148-1:2018 - Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
Effective Date
03-Feb-2026
Referred By
EN IEC 62148-17:2023 - Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
Effective Date
03-Feb-2026
Referred By
EN IEC 61300-3-46:2025 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Examinations and measurements - Bore diameter in rectangular ferrules
Effective Date
03-Feb-2026
Referred By
EN 61753-057-2:2013 - Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment
Effective Date
03-Feb-2026
Referred By
EN 61753-021-3:2013 - Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment
Effective Date
03-Feb-2026

Get Certified

Connect with accredited certification bodies for this standard

TL 9000 QuEST Forum

Telecommunications quality management system.

ANAB United States Verified
Visit Website

ANCE

Mexican certification and testing association.

EMA Mexico Verified
Visit Website

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 61754-7:2005 is a standard published by CLC. Its full title is "Fibre optic connector interfaces - Part 7: Type MPO connector family". This standard covers: Defines the standard interface dimensions for type MPO family of connectors.

Defines the standard interface dimensions for type MPO family of connectors.

EN 61754-7:2005 is classified under the following ICS (International Classification for Standards) categories: 33.180.20 - Fibre optic interconnecting devices. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 61754-7:2005 has the following relationships with other standards: It is inter standard links to EN 186290:1997, EN 61754-7:2008, EN 60874-1:2012, EN IEC 62148-22:2023, EN 61753-121-2:2017, EN 62148-15:2010, EN 61300-3-22:2011, EN IEC 61757-1-1:2020, EN 61753-121-2:2010, EN 61300-3-33:2012, EN IEC 62148-1:2018, EN IEC 62148-17:2023, EN IEC 61300-3-46:2025, EN 61753-057-2:2013, EN 61753-021-3:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 61754-7:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...