Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings

IEC 61757-1-1:2020 is available as IEC 61757-1-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61757-1-1:2020 defines detail specifications for fibre optic sensors using one or more fibre Bragg gratings (FBG) as the sensitive element for strain measurements. Generic specifications for fibre optic sensors are defined in IEC 61757. This document specifies the most important features and characteristics of a fibre optic sensor for strain measurements, based on use of an FBG as the sensitive element, and defines the procedures for their determination. Furthermore, it specifies basic performance parameters and characteristics of the corresponding measuring instrument to read out the optical signal from the FBG. This document refers to the measurement of static and dynamic strain values in a range of frequencies. A blank detail specification is provided in Annex B. This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition: - update of cited standards; - clarification of definitions and test specifications.

Lichtwellenleitersensoren - Teil 1-1: Dehnungsmessungen - Dehnungssensoren basierend auf Faser-Bragg-Gitter

Capteurs fibroniques - Partie 1-1: Mesure de déformation - Capteurs de déformation basés sur des réseaux de Bragg à fibres

IEC 61757-1-1:2020 est disponible sous forme de IEC 61757-1-1:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61757-1-1:2020 définit des spécifications particulières pour des capteurs fibroniques utilisant un ou plusieurs réseaux de Bragg à fibres (FBG, fibre Bragg gratings) comme élément de détection pour les mesures de déformation. Des spécifications génériques pour les capteurs fibroniques sont définies dans l'IEC 61757. Le présent document spécifie les caractéristiques les plus importantes d'un capteur fibronique servant à mesurer des déformations en utilisant un FBG comme élément de détection, et il définit les procédures permettant de déterminer ces caractéristiques. Il spécifie également les paramètres et les caractéristiques des performances de base de l'appareil utilisé pour mesurer le signal optique provenant du FBG. Le présent document porte sur la mesure des valeurs de déformations statiques et dynamiques sur une plage de fréquences. Une spécification particulière-cadre est fournie à l'Annexe B. Cette deuxième édition annule et remplace la première édition parue en 2016 dont elle constitue une révision technique. La présente édition inclut les modifications techniques suivantes par rapport à l'édition précédente: - mise à jour des normes citées; - clarification des définitions et des spécifications d'essais.

Optični senzorji - 1-1. del: Merjenje deformacij - Zaznavala deformacij na podlagi vlakenske Braggove uklonske mrežice (IEC 61757-1-1:2020)

General Information

Status
Published
Publication Date
21-May-2020
Current Stage
6060 - Document made available - Publishing
Start Date
22-May-2020
Due Date
27-Mar-2020
Completion Date
22-May-2020

Relations

Buy Standard

Standard
EN IEC 61757-1-1:2020 - BARVE
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2020
Nadomešča:
SIST EN 61757-1-1:2017
Optični senzorji - 1-1. del: Merjenje deformacij - Zaznavala deformacij na podlagi
vlakenske Braggove uklonske mrežice (IEC 61757-1-1:2020)
Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg
gratings (IEC 61757-1-1:2020)
Lichtwellenleitersensoren - Teil 1-1: Dehnungsmessungen - Dehnungssensoren
basierend auf Faser-Bragg-Gitter (IEC 61757-1-1:2020)
Capteurs à fibres optiques - Partie 1-1: Mesure de déformation - Capteurs de
déformation basés sur des réseaux de Bragg à fibres (IEC 61757-1-1:2020)
Ta slovenski standard je istoveten z: EN IEC 61757-1-1:2020
ICS:
33.180.99 Druga oprema za optična Other fibre optic equipment
vlakna
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61757-1-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 33.180.99 Supersedes EN 61757-1-1:2017 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic sensors - Part 1-1: Strain measurement - Strain
sensors based on fibre Bragg gratings
(IEC 61757-1-1:2020)
Capteurs fibroniques - Partie 1-1: Mesure de déformation - Lichtwellenleitersensoren - Teil 1-1: Dehnungsmessungen -
Capteurs de déformation basés sur des réseaux de Bragg à Dehnungssensoren basierend auf Faser-Bragg-Gitter
fibres (IEC 61757-1-1:2020)
(IEC 61757-1-1:2020)
This European Standard was approved by CENELEC on 2020-05-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61757-1-1:2020 E

European foreword
The text of document 86C/1642/FDIS, future edition 2 of IEC 61757-1-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 61757-1-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-01
document have to be withdrawn
This document supersedes EN 61757-1-1:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61757-1-1:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60793-1-30 NOTE Harmonized as EN 60793-1-30
IEC 60793-1-31 NOTE Harmonized as EN IEC 60793-1-31
IEC 60793-1-33 NOTE Harmonized as EN 60793-1-33
ISO 527-4 NOTE Harmonized as EN ISO 527-4
ISO 7500-1 NOTE Harmonized as EN ISO 7500-1
ISO 14125 NOTE Harmonized as EN ISO 14125

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050 series International Electrotechnical - -
Vocabulary
IEC 60068-2 series Environmental testing - Part 2: Tests EN 60068-2 series
IEC 60793-2 -  Optical fibres - Part 2: Product EN IEC 60793-2 -
specifications - General
IEC 60793-2-50 -  Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification
for class B single-mode fibres
IEC 61300-2 series Fibre optic interconnecting devices and EN 61300-2 series
passive components - Basic test and
measurement procedures - Part 2: Tests
IEC 61754 series Fibre optic interconnecting devices and EN 61754 series
passive components - Fibre optic
connector interfaces
IEC 61757 -  Fibre optic sensors - Generic EN IEC 61757 -
specification
IEC/TR 61931 -  Fibre optic - Terminology - -
IEC 62129-1 -  Calibration of wavelength/optical EN 62129-1 -
frequency measurement instruments -
Part 1: Optical spectrum analyzers
IEC 62129-2 -  Calibration of wavelength/optical EN 62129-2 -
frequency measurement instruments -
Part 2: Michelson interferometer single
wavelength meters
IEC 62129-3 -  Calibration of wavelength/optical EN IEC 62129-3 -
frequency measurement instruments -
Part 3:Optical frequency meters
internally referenced to a frequency
comb
Publication Year Title EN/HD Year
ISO/IEC Guide 99 -  International vocabulary of metrology - - -
Basic and general concepts and
associated terms (VIM)
IEC 61757-1-1 ®
Edition 2.0 2020-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fibre optic sensors –
Part 1-1: Strain measurement – Strain sensors based on fibre Bragg gratings

Capteurs fibroniques –
Partie 1-1: Mesure de déformation – Capteurs de déformation basés

sur des réseaux de Bragg à fibres

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.99 ISBN 978-2-8322-8019-5

– 2 – IEC 61757-1-1:2020 © IEC 2020
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Symbols . 14
5 Structures and characteristics. 16
5.1 Fibre Bragg grating (FBG) . 16
5.2 FBG strain sensor configuration . 19
5.3 Measuring point and installation . 19
5.4 Gauge length . 20
5.5 Strain and reference strain . 20
5.6 Reference wavelength . 20
5.7 Stability behaviour . 21
5.7.1 Drift and creep . 21
5.7.2 Shape stability of the Bragg grating peak . 21
5.7.3 Hysteresis . 21
5.8 Test specimen . 22
5.9 Indication of the measured values . 22
5.10 Zero point related measurement . 22
5.11 Non-zero point related measurement . 22
5.12 Production set . 22
5.13 FBG strain sensor standard type . 22
5.14 FBG strain sensor series . 22
6 Features and characteristics to be reported . 23
6.1 Construction details and geometrical dimensions . 23
6.2 Configuration of the FBG strain sensor . 23
6.3 Temperature and humidity range . 23
6.4 Connecting requirement . 23
7 Features and characteristics to be measured . 23
7.1 Sampling and statistical evaluation . 23
7.1.1 Sampling . 23
7.1.2 Random sampling . 23
7.1.3 Type testing . 24
7.1.4 Series testing . 24
7.1.5 Individual sample testing . 24
7.1.6 Reporting the measuring result . 24
7.1.7 Sample conditioning . 24
7.1.8 Ambient test conditions . 24
7.1.9 Required type of test for individual characteristics . 24
7.2 Bragg wavelength λ . 25
B
7.2.1 General . 25
7.2.2 Measuring procedure . 26
7.2.3 Evaluation . 26
7.2.4 Reporting . 26

IEC 61757-1-1:2020 © IEC 2020 – 3 –
7.3 FBG spectral width. 26
7.3.1 Measuring procedure . 26
7.3.2 Evaluation . 27
7.3.3 Reporting . 27
7.4 FBG reflectivity . 27
7.4.1 Measuring procedure . 27
7.4.2 Evaluation . 27
7.4.3 Reporting . 27
7.5 FBG strain sensitivity .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.