EN 60793-1-1:2003

SIST EN 60793-1-1:2004SLOVENSKIseptember 2004
STANDARDOptična vlakna – 1-1. del: Metode merjenja in preskusni postopki - Splošno in smernice (IEC 60793-1-1:2002)*Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance (IEC 60793-1-1:2002)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60793-1-1:2004(en)ICS33.180.10







EUROPEAN STANDARD
EN 60793-1-1 NORME EUROPÉENNE EUROPÄISCHE NORM
January 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-1-1:2003 E
ICS 33.180.10
English version
Optical fibres Part 1-1: Measurement methods and test procedures -
General and guidance (IEC 60793-1-1:2002)
Fibres optiques Partie 1-1: Méthodes de mesure
et procédures d'essai -
Généralités et guide (CEI 60793-1-1:2002)
Lichtwellenleiter Teil 1-1: Mess- und Prüfverfahren - Allgemeines und Leitfaden (IEC 60793-1-1:2002)
This European Standard was approved by CENELEC on 2002-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.



EN 60793-1-1:2003 - 2 - Foreword
The text of document 86A/815/FDIS, future edition 2 of IEC 60793-1-1, prepared by SC 86A, Fibres and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60793-1-1 on 2002-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2003-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2005-12-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. __________
Endorsement notice
The text of the International Standard IEC 60793-1-1:2002 was approved by CENELEC as a European Standard without any modification. __________



- 3 - EN 60793-1-1:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-1-20 - 1) Optical fibres Part 1-20: Measurement methods and test procedures - Fibre geometry
EN 60793-1-20 2002 2) IEC 60793-1-21 - 1) Part 1-21: Measurement methods and test procedures - Coating geometry
EN 60793-1-21 2002 2) IEC 60793-1-22 - 1) Part 1-22: Measurement methods and test procedures - Length measurement
EN 60793-1-22 2002 2) IEC 60793-1-30 - 1) Part 1-30: Measurement methods and test procedures - Fibre proof test
EN 60793-1-30 2002 2) IEC 60793-1-31 - 1) Part 1-31: Measurement methods and test procedures - Tensile strength
EN 60793-1-31 2002 2) IEC 60793-1-32 - 1) Part 1-32: Measurement methods and test procedures - Coating strippability
EN 60793-1-32 - 3) IEC 60793-1-33 - 1) Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
EN 60793-1-33 2002 2) IEC 60793-1-34 - 1) Part 1-34: Measurement methods and test procedures - Fibre curl
EN 60793-1-34 2002 2) IEC 60793-1-40 - 1) Part 1-40: Measurement methods and test procedures – Attenuation
EN 60793-1-4
...