Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text with the following: This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. This part of IEC 61010 specifies safety requirements for measurement equipment for insulation resistance and test equipment for electric strength with an output voltage exceeding 50 V a.c. or 120 V d.c.. This part also applies to combined measuring equipment which has an insulation resistance measurement function or an electric strength test measurement function.

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-034: Besondere Anforderungen für Prüf- und Messgeräte zur Isolationswiderstandsmessung und Prüfausrüstung für die Spannungsfestigkeit

Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-034: Exigences particulières applicables aux appareils de mesure de la résistance d'isolement et aux appareils d'essai de rigidité diélectrique

Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-034. del: Posebne zahteve za merilno opremo za izolacijsko upornost in preskusno opremo za električno trdnost

General Information

Status
Published
Publication Date
08-Apr-2021
Current Stage
6060 - Document made available - Publishing
Start Date
09-Apr-2021
Completion Date
09-Apr-2021

Relations

Buy Standard

Amendment
EN IEC 61010-2-034:2021/A11:2021
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2021
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko
uporabo - 2-034. del: Posebne zahteve za merilno opremo za izolacijsko upornost
in preskusno opremo za električno trdnost
Safety requirements for electrical equipment for measurement, control, and laboratory
use - Part 2-034: Particular requirements for measurement equipment for insulation
resistance and test equipment for electric strength
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-034: Besondere Anfordungen für Prüf- und Messgeräte zur
Isolationswiderstandsmessung und Prüfausrüstung für die Spannungsfestigkeit
Exigences de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-034: Exigences particulières applicables aux appareils de mesure e
la résistance d'isolement et aux appareils d'essai de rigidité diélectrique
Ta slovenski standard je istoveten z: EN IEC 61010-2-034:2021/A11:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61010-2-034:2021/A11

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 19.080; 71.040.10
English Version
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-034: Particular requirements
for measurement equipment for insulation resistance and test
equipment for electric strength
Exigences de sécurité pour appareils électriques de Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
mesurage, de régulation et de laboratoire - Partie 2-034: Regel- und Laborgeräte - Teil 2-034: Besondere
Exigences particulières applicables aux appareils de Anfordungen für Prüf- und Messgeräte zur
mesure de la résistance d'isolement et aux appareils Isolationswiderstandsmessung und Prüfausrüstung für die
d'essai de rigidité diélectrique Spannungsfestigkeit
This amendment A11 modifies the European Standard EN IEC 61010-2-034:2021; it was approved by CENELEC on 2021-03-15.
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61010-2-034:2021/A11:2021 E

European foreword
This document (EN IEC 61010-2-034:2021/A11:2021) has been prepared by CLC/TC 66X “Safety of
measuring, control, and laboratory equipment”.
The following dates are fixed:
• latest date by which this document has (dop) 2022-03-15
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2024-03-15
standards conflicting with this document
have to be withdrawn
This document amends EN IEC 61010-2-034:2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
1 Modification to 6.8.3.1, “The a.c. voltage test”
Replace the first sentence of the first paragraph with the following sentence:
“The voltage tester shall have a regulated output capable of maintaining the test voltage throughout the
test within ± 5 % of the specified value.”
2 Modification to 6.8.3.2, “The d.c. voltage test”
Add a new sentence at the beginning of the first paragraph:
“The voltage tester shall have a regulated output capable of maintaining the test voltage throughout the
test within ± 5 % of the specified value.”
3 Modifications to K.101.4.1, “General”
Replace the second paragraph with the following note:

NOTE 1 The manufacturer is supposed to take the expected life of the equipment into account when selecting
insulating materials.”
As a result of this, renumber the ex
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.