EN 62922:2017

SLOVENSKI STANDARD
01-april-2017
3ORãþH]RUJDQVNLPLVYHWOHþLPLGLRGDPL2/(']DVSORãQRUD]VYHWOMDYR
=DKWHYDQHODVWQRVWL,(&
Organic light emitting diode (OLED) panels for general lighting - Performance
requirements (IEC 62922:2016)
Ta slovenski standard je istoveten z: EN 62922:2017
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62922
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2017
ICS 29.140.99
English Version
Organic light emitting diode (OLED) panels for general lighting -
Performance Requirements
(IEC 62922:2016)
Panneaux à diodes électroluminescentes organiques Organische-Licht-emittierende-Dioden- (OLED-) Panels -
(OLED) destinés à l'éclairage général - Exigences de Anforderungen an die Arbeitsweise
performance (IEC 62922:2016)
(IEC 62922:2016)
This European Standard was approved by CENELEC on 2016-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62922:2017 E
European foreword
The text of document 34A/1942/FDIS, future edition 1 of IEC 62922, prepared by SC 34A "Lamps" of
IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62922:2017.

The following dates are fixed:
(dop) 2017-09-23
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-12-23
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62922:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60068-2-20:2008 NOTE Harmonized as EN 60068-2-20:2008 (not modified).
IEC 60068-2-21:2006 NOTE Harmonized as EN 60068-2-21:2006 (not modified).
IEC 60749-14:2003 NOTE Harmonized as EN 60749-14:2003 (not modified).
IEC 61747-10-1:2013 NOTE Harmonized as EN 61747-10-1:2013 (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 60050-845 -  International Electrotechnical Vocabulary - -
(IEV) -
Chapter 845: Lighting
IEC 62868 -  Organic light emitting diode (OLED) EN 62868 -
panels for general lighting - Safety
requirements
IEC/TR 62732 -  Three-digit code for designation of colour - -
rendering and correlated colour
temperature
IEC/TS 62972 -  General lighting - Organic light emitting - -
diode (OLED) products and related
equipment - Terms and definitions
ISO 11664-5/ 2009 Colorimetry - EN ISO 11664-5 2011
CIE S 014-5/E Part 5: CIE 1976 L*u*v* Colour space and
u', v' uniform chromaticity scale diagram
CIE 013.3 1995 Method of measuring and specifying colour - -
rendering properties of light source
CIE TN 001 2014 Chromaticity difference specification for - -
light source
Superseded by EN ISO 11664-5:2016 (SO/CIE 11664-5:2016).
IEC 62922 ®
Edition 1.0 2016-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Organic light emitting diode (OLED) panels for general lighting – Performance

requirements
Panneaux à diodes électroluminescentes organiques (OLED) destinés à

l’éclairage général – Exigences de performance

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-3754-0

– 2 – IEC 62922:2016 © IEC 2016
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General statement and test conditions . 7
4.1 General statement . 7
4.2 General test conditions . 7
4.3 Stabilization . 8
4.3.1 General requirements for stabilization. 8
4.3.2 Current-driven stabilization . 8
4.3.3 Voltage-driven stabilization . 8
5 Marking . 8
5.1 Contents and location . 8
5.2 Information on reliability of electrical connection . 9
6 Input power . 9
7 Initial photometric characteristics . 9
7.1 General . 9
7.2 Luminous flux . 10
7.3 Luminous efficacy . 10
7.4 Chromaticity coordinates . 10
7.5 Correlated colour temperature (CCT) . 10
7.6 Colour rendering index (CRI) . 10
7.7 Luminance uniformity . 11
7.7.1 Average luminance (L ) . 11
av
7.7.2 Luminance uniformity (U) . 11
7.8 Luminous intensity distribution . 11
7.9 Surface chromaticity uniformity . 12
7.10 Angular chromaticity uniformity . 12
8 Maintained photometric characteristics . 12
9 Reliability . 13
9.1 High temperature – high humidity operation . 13
9.2 High temperature – high humidity storage . 13
9.3 Reliability of connection . 13
10 Information for controlgear design . 14
Annex A (informative) Use of regional standards. 15
Annex B (informative) Measuring method of angular chromaticity uniformity . 16
Annex C (normative) Measuring method for luminous flux . 18
C.1 General . 18
C.2 Integrating sphere measurements . 18
C.2.1 Integrating sphere methods and installation position . 18
C.2.2 Size of the integrating sphere . 18
C.3 Goniophotometric measurements . 19
Annex D (informative) Tests of robustness of terminations and connectors . 20
D.1 General . 20
D.2 Wire terminations and pin type connectors . 20

IEC 62922:2016 © IEC 2016 – 3 –
D.2.1 General . 20
D.2.2 Tensile test . 20
D.2.3 Bending test . 20
D.2.4 Torsion test . 20
D.3 Flexible flat terminations . 20
D.3.1 General . 20
D.3.2 Peel test A . 21
D.3.3 Peel test B . 21
D.4 Soldering . 21
Annex E (informative)  Information for controlgear design . 22
E.1 General . 22
E.2 Operation . 22
E.3 Characteristics of the driver output current . 22
E.4 Characteristics of the driver output voltage . 23
E.5 Dimming . 23
E.6 Short-circuit protection . 23
Annex F (informative) Information for luminaire design . 24
Bibliography . 25

Figure C.1 – 4π geometry (left), 2π geometry sphere (centre) and 2π geometry
hemisphere (right).
...