EN 60061-1:1993/A63:2022

SLOVENSKI STANDARD
01-oktober-2022
Vznožki in okovi sijalk skupaj s kalibri za nadzorovanje izmenljivosti in varnosti -
1. del: Vznožki sijalk - Dopolnilo A63
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 1: Lamp caps
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 1: Lampensockel
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 1: Culots de lampes
Ta slovenski standard je istoveten z: EN 60061-1:1993/A63:2022
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60061-1:1993/A63

NORME EUROPÉENNE
EUROPÄISCHE NORM July 2022
ICS 29.140.10
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 1: Lamp caps
(IEC 60061-1:1969/AMD63:2022)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 1: der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel
Culots de lampes (IEC 60061-1:1969/AMD63:2022)
(IEC 60061-1:1969/AMD63:2022)
This amendment A63 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC on 2022-07-01. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-1:1993/A63:2022 E

European foreword
The text of document 34B/2136/FDIS, future IEC 60061-1/AMD63, prepared by SC 34B "Lamp caps
and holders" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60061-1:1993/A63:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-07-01
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60061-1:1969/AMD63:2022 was approved by CENELEC as
a European Standard without any modification.

IEC 60061-1 ®
Edition 3.0 2022-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 63
T he sheets contained in this amendment are to be inserted in IEC 60061-1 (1969)

AMENDEMENT 63
Les feuilles de cet amendement sont à insérer dans l'IEC 60061-1 (1969)

Lamp caps and holders together with gauges for the control of

interchangeability and safety –

Part 1: Lamp caps
Culots de lampes et douilles ainsi que calibres pour le contrôle de

l'interchangeabilité et de la sécurité –

Partie 1: Culots de lampes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.10 ISBN 978-2-8322-0048-3

IEC 60061-1:1969/AMD63:2022  IEC 2022

CONTENTS SOMMAIRE
CONTENTS BY DESIGNATION SOMMAIRE PAR DÉSIGNATION
Sheet Feuille
Bi-pin caps G1.27, GX1.27 & GY1.3 . 7004-2-2 Culots à deux broches G1.27, GX1.27 & GY1.3 . 7004-2-2
Bi-pin caps G2.54, GX2.54 & GY2.5 . 7004-3-2 Culots à deux broches G2.54, GX2.54 & GY2.5 . 7004-3-2
Caps PX26d, PY26d-1 … PY26d-7 . 7004-5-7 Culots PX26d, PY26d-1 … PY26d-7 . 7004-5-7
Screw caps E11 . 7004-6-1 Culots à vis E11 . 7004-6-1
Screw caps EY10 . 7004-7-1 Culots à vis EY10 . 7004-7-1
Bayonet caps BAX9s . 7004-8-1 Culots à baïonnette BAX9s . 7004-8-1
Bayonet caps BAY9s . 7004-9-1 Culots à baïonnette BAY9s . 7004-9-1
Caps B22d . 7004-10-7 Culots B22d . 7004-10-7
Bayonet cap B22d-3(90°/135°)/25x26 . 7004-10A-2 Culot à baïonnette B22d-3(90°/135°)/25x26 . 7004-10A-2
Caps B15d . 7004-11-6 Culots B15d . 7004-11-6
Bayonet caps BA15 . 7004-11A-10 Culots à baïonnette BA15d & BA15s . 7004-11A-10
Bayonet caps BAY15d. 7004-11B-8 Culots à baïonnette BAY15d & BAY15s . 7004-11B-8
Caps BAZ15 . 7004-11C-3 Culots BAZ15d & BAZ15s . 7004-11C-3
Bayonet caps BA15s-3. 7004-11D-2 Culots à baïonnette BA15s-3(110°/130°) . 7004-11D-2
Caps BAW15 . 7004-11E-1 Culots BAW15d & BAW15s . 7004-11E-1
Bayonet caps BA20 . 7004-12-7 Culots à baïonnette BA20 . 7004-12-7
Bayonet automobile caps Culots à baïonnette pour automobiles
BA21-3(120°) . 7004-13-4 BA21-3(120°) . 7004-13-4
Bayonet caps BA9s . 7004-14-10 Culot à baïonnette BA9s . 7004-14-10
Bayonet cap BA7 . 7004-15-2 Culot à baïonnette BA7. 7004-15-2
Bayonet cap BY22d . 7004-17-3 Culot à baïonnette BY22d . 7004-17-3
Bayonet caps BAX15d. 7004-18-2 Culots à baïonnette BAX15d . 7004-18-2
Caps BAU15d & BAU15s . 7004-19-2 Culots BAU15d & BAU15s. 7004-19-2
Caps BA15d-3(110°), BA15s-3(110°), Culots BA15d-3(110°), BA15s-3(110°),
BAU15d-3(110°), BAU15s-3(110°), BAU15d-3(110°), BAU15s-3(110°),
BAW15d-3(110°), BAW15s-3(110°), BAW15d-3(110°), BAW15s-3(110°),
BAY15d-3(110°), BAY15s-3(110°), BAY15d-3(110°), BAY15s-3(110°),
BAZ15d-3(110°) & BAZ15s-3(110°) . 7004-19A-1 BAZd15-3(110°) & BAZs15-3(110°) . 7004-19A-1
Termination on finished lamps G16d . 7004-20-2 Connecteur des lampes terminées G16d . 7004-20-2
Screw caps E27 . 7004-21-10 Culots à vis E27 . 7004-21-10
Screw caps E26 . 7004-21A-4 Culots à vis E26 . 7004-21A-4
Screw caps E10 . 7004-22-6 . 7004-22-6
Culots à vis E10 .
Screw caps E14 . 7004-23-7 Culots à vis E14 . 7004-23-7
Screw caps E40 . 7004-24-7 Culots à vis E40 . 7004-24-7
Screw caps E39 . 7004-24A-3 Culots à vis E39 . 7004-24A-3
Screw cap E5 . 7004-25-3 Culot à vis E5 . 7004-25-3
Screw cap E17 . 7004-26-4 Culot à vis E17 . 7004-26-4
Screw cap E27/51x39 . 7004-27-3 Culot à vis E27/51x39 . 7004-27-3
Screw cap E12 . 7004-28-2 Culot à vis E12 . 7004-28-2
Double contact screw cap E26d . 7004-29-2 Culot à vis à double contact E26d . 7004-29-2
Prefocus screw caps EP10 . 7004-30-2 Culots à vis préfocus EP10 . 7004-30-2
Prefocus caps P20d, PX20d, PY20d & PZ20d . 7004-31-2 Culots préfocus P20d, PX20d, PY20d & PZ20d . 7004-31-2
Prefocus caps P22d & PX22d . 7004-32-2 Culots préfocus P22d & PX22d . 7004-32-2
Caps 2G13 . 7004-33-4 Culots 2G13 . 7004-33-4
Prefocus caps - Assembly of ring and cap Culots préfocus - Assemblage de la collerette
on finished lamps PX43t . 7004-34-2 et du culot sur lampes terminées PX43t . 7004-34-2
Prefocus cap PX13.5s . 7004-35-2 Culot préfocus PX13.5s . 7004-35-2
Prefocus cap P26s on finished lamp . 7004-36-1 Culot préfocus P26s sur la lampe terminée . 7004-36-1
Prefocus caps - Assembly of ring and Culots préfocus - Assemblage de la collerette
cap on finished lamps PKX22s . 7004-37-2 et du culot sur lampes terminées PKX22s . 7004-37-2

IEC 60061-1:1969/AMD63:2022  IEC 2022

Sheet Feuille
Prefocus caps P43t . 7004-39-6 Culots préfocus P43t . 7004-39-6
Prefocus cap P13.5s . 7004-40-2 Culot préfocus P13.5s . 7004-40-2
Prefocus caps P28s . 7004-42-7 Culots préfocus P28s . 7004-42-7
Prefocus caps P40s . 7004-43-5 Culots préfocus P40s . 7004-43-5
Prefocus cap P30s-10.3. Assembly on finished Culot préfocus P30s-10.3. Assemblage sur lampes
lamps . 7004-44-3 terminées . 7004-44-3
Projector lamp caps on finished lamps G17q-7, Culots de lampes de projection sur lampes
GX17q-7 & GY17q-7 . 7004-45-3 terminées G17q-7, GX17q-7 & GY17q-7 . 7004-45-3
Prefocus caps - Assembly of ring and cap on Culots préfocus - Assemblage de la collerette et du
finished lamp P14.5s . 7004-46-2 culot sur la lampe terminée P14.5s . 7004-46-2
Prefocus cap PK22s . 7004-47-4 Culot préfocus PK22s . 7004-47-4
Prefocus cap PG22-6.35. Assembly of collar and Culot préfocus PG22-6.35. Assemblage de la
cap on finished lamp . 7004-48-1 collerette et du culot sur la lampe terminée . 7004-48-1
Bi-pin caps G13 .
...