EN 60061-2:1993/A62:2026
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
- Status
- Published
- Publication Date
- 15-Oct-2026
- Technical Committee
- CLC/TC 34 - 'Lamps and related equipment
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 16-Oct-2026
- Completion Date
- 16-Oct-2026
EN 60061-2:1993/A62:2026 is a CENELEC amendment to the European Standard for lamp caps and holders together with gauges for the control of interchangeability and safety, Part 2: Lampholders. It adopts IEC 60061-2:1969/AMD62:2026 without modification and adds a new standard sheet for specific lampholder and connector designs used to control fit, keying and safe assembly.
What does EN 60061-2:1993/A62:2026 specify?
EN 60061-2:1993/A62:2026 specifies the changes needed to EN 60061-2:1993 for one additional lampholder sheet, 7005-189-1. The amendment is part of the sheet-based system used in the 60061 series, where each sheet defines dimensions and identification features for a particular lampholder, holder or connector design.
The document is organized as an amendment package rather than as a full standalone text. It includes replacement title pages, updated contents by sheet and by designation, an updated foreword, instructions for inserting the new pages, and the new sheet itself.
The contents by sheet and by designation show that the base standard covers a wide range of lampholders and related connectors for many lamp cap families. In practice, this means the document is used as a dimensional reference for matching parts, checking interchangeability and keeping the holder and cap system aligned across manufacturers.
What are the key requirements of EN 60061-2:1993/A62:2026?
The key technical content of EN 60061-2:1993/A62:2026 is in sheet 7005-189-1, which covers holders for the PAJ26.4p, PAJ31.4p, PAJ36.4p and PAJ41.4p families, each with four keyed variants. For engineers, this means the sheet is not generic guidance - it is a dimensional definition for specific holder types that must match the corresponding cap details.
The drawings are only for interchangeability-critical dimensions. The sheet states that the figures illustrate the dimensions essential for interchangeability, and it points to related cap sheet 7004-189 for the cap details. In practice, users must check the controlled dimensions, not treat the drawing as a general assembly sketch.
Table 1 assigns electrical keying dimensions to the four variants. The sheet links M1 to M4 with the PAJ variants, so the correct variant can be selected and identified electrically. This matters because the keying prevents wrong pairings and helps keep the electrical interface in the intended orientation.
The holder also uses mechanical keying. Dimension A is given for mechanical keying, and note 4 explains how dimension B changes sign for some key arrangements. This matters when designing the body and key features so the holder cannot be inserted incorrectly.
Reference surfaces define the Z reference. Note 1 says the cap-reference-surfaces must provide stable positioning and withstand the retaining force without deformation, and their flatness is limited. In practice, the designer must control the seating surfaces so the light source stays positioned consistently under load.
The X,Y reference is defined by reference pins. Note 3 identifies reference pins as the datum for X,Y location. This is important for measurement and gauging, because the same reference must be used when verifying the part geometry.
Dimension C must not be negative. Note 2 defines C as the distance between the reference surfaces and their direct lower surroundings. That tells the manufacturer where the surrounding geometry may sit relative to the reference plane and helps keep the seating area usable.
The insertion and retention features are controlled. Note 5 calls for a minimum cylindrical length for D1 above the Z reference, with a conical end expected for easier insertion and no burrs allowed. Note 6 says the fixing device, for example a screw, must hold the light source within the limits given in the light source specification. This is the practical hold-and-locate requirement for assembly and service.
Connector geometry is also defined. Note 7 uses connector reference edges, and note 8 explains that a negative T means the connector centre is on the other side of the reference surfaces. Note 9 requires the connecting elements to conduct on both sides of the counterpart, which matters for reliable electrical contact in the mated assembly.
Table 2 brings these requirements together as dimensional limits for the holder and connector features. For production, inspection and gauge design, this is the section that translates the concept drawings into measurable acceptance limits.
What terms does EN 60061-2:1993/A62:2026 define?
Lampholder - A component that holds and locates a lamp cap so the light source can be fitted and retained in a controlled way.
Holder - In this sheet, a holder is the physical part whose dimensions are controlled for fit, location and retention of the associated light source.
Connector - A part of the interface used for electrical connection and keying, with reference edges and keyed geometry defined in the sheet.
Mechanical keying - A shaped feature used to control physical orientation and prevent incorrect insertion or assembly.
Electrical keying - The keyed electrical geometry identified by M1 to M4, used to distinguish variants and control electrical matching.
Z reference - The axial reference established by the cap-reference-surfaces and used as the main positioning datum for the holder.
X,Y-reference - The lateral reference defined by the reference pins, used to locate the part in the transverse directions.
Who uses EN 60061-2:1993/A62:2026?
EN 60061-2:1993/A62:2026 is used by lampholder and lighting component manufacturers, tooling designers, quality engineers and test laboratories. It is also relevant to buyers and technical reviewers who need to verify that a supplier’s holder design matches the required interchangeability and safety geometry.
The standard is especially useful in lighting and electrotechnical work where lamp caps, holders and gauges must match across products. It supports design verification, incoming inspection, gauge selection, and conformance checking for the specific PAJ holder families covered by the sheet.
What changed in EN 60061-2:1993/A62:2026 from the previous edition?
EN 60061-2:1993/A62:2026 is Amendment 62 to EN 60061-2:1993. It replaces the existing title pages, contents by sheet, contents by designation and foreword, and it inserts the new sheet 7005-189-1.
Which standards are used with EN 60061-2:1993/A62:2026?
EN 60061-2:1993/A62:2026 is the European adoption of IEC 60061-2:1969/AMD62:2026, approved by CENELEC without modification. The sheet also refers readers to related cap sheet 7004-189 for the corresponding cap details.
What does the EN 60061-2:1993/A62:2026 document contain?
The document contains updated front matter, the approved CENELEC foreword, and instructions for inserting the new material into IEC 60061-2. Its technical content is the three-page sheet 7005-189-1.
That sheet includes Table 1 with the designation table and keying dimensions, Figures 1 to 3 showing the holder principle design, connector principle design and connector keys, and Table 2 with dimensional limits. The notes explain the datums, surface requirements, insertion conditions, fixing device function and connector conduction requirements.
In practical use, the sheet supports design work, gauge checking and interchangeability control. It gives manufacturers and inspectors the geometry needed to verify that the holder, connector and corresponding cap fit together as intended.
Relations
- Effective Date
- 20-Oct-2026
- Effective Date
- 20-Oct-2026
- Effective Date
- 20-Oct-2026
- Referred By
EN 61184:2017 - Bayonet lampholders - Effective Date
- 20-Oct-2026
- Effective Date
- 12-May-2026
Get Certified
Connect with accredited certification bodies for this standard

IMQ S.p.A. (Certification)
Italian electrical product certification.

SLG Prüf- und Zertifizierungs GmbH
German testing and certification body.

UL Solutions
Global safety science company with testing, inspection and certification.
Sponsored listings
Frequently Asked Questions
EN 60061-2:1993/A62:2026 is a amendment published by CLC. Its full title is "Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders". This standard covers: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
EN 60061-2:1993/A62:2026 is classified under the following ICS (International Classification for Standards) categories: 29.140.10 - Lamp caps and holders. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60061-2:1993/A62:2026 has the following relationships with other standards: It is inter standard links to EN IEC 60598-1:2021, EN 60598-1:2015, EN 60838-1:2017, EN 61184:2017, EN 60061-2:1993. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60061-2:1993/A62:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2026
Vznožki in okovi žarnic in sijalk skupaj s kalibri za nadzorovanje izmenljivosti in
varnosti - 2. del: Okovi žarnic in sijalk - Dopolnilo A62 (IEC 60061-
2:1969/AMD62:2026)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 2: Lampholders (IEC 60061-2:1969/AMD62:2026)
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 62: Lampenfassungen (IEC 60061-2:1969/AMD62:2026)
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 62: Douilles (IEC 60061-2:1969/AMD62:2026)
Ta slovenski standard je istoveten z: EN 60061-2:1993/A62:2026
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60061-2:1993/A62
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2026
ICS 29.140.10
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 2: Lampholders
(IEC 60061-2:1969/AMD62:2026)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 2: der Austauschbarkeit und Sicherheit - Teil 2:
Douilles Lampenfassungen
(IEC 60061-2:1969/AMD62:2026) (IEC 60061-2:1969/AMD62:2026)
This amendment A62 modifies the European Standard EN 60061-2:1993; it was approved by CENELEC on 2026-09-30. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-2:1993/A62:2026 E
European foreword
The text of document 34B/2234/FDIS, future edition 3 of IEC 60061-2/AMD62, prepared by SC 34B
"Fit systems for light sources" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 60061-2:1993/A62:2026.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-10-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-10-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60061-2:1969/AMD62:2026 was approved by CENELEC as
a European Standard without any modification.
IEC 60061-2 ®
Edition 3.0 2026-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 62
The sheets contained in this amendment are to be inserted in IEC 60061-2 (1969)
AMENDEMENT 62
Les feuilles de cet amendement sont à insérer dans l'IEC 60061-2 (1969)
Lamp caps and holders together with gauges for the control of
interchangeability and safety -
Part 2: Lampholders
Culots de lampes et douilles ainsi que calibres pour le contrôle de
l'interchangeabilité et de la sécurité -
Partie 2: Douilles
ICS 29.140.10 ISBN 978-2-8327-1450-8
IEC 60061-2:1969-01/AMD62:2026-08(en-fr)
IEC 60061-2:1969/AMD62:2026 © IEC 2026
CONTENTS BY SHEET / SOMMAIRE PAR FEUILLE
Sheet
System Designation AMD Name English Nom Français
Feuilles
7005-5-4 PX26d & PY26d-1 … 51 Lampholders Douilles
PY26d-7
7005-6-1 E11 K Lampholder Douille
7005-7-1 EY10 L Lampholder Douille
7005-8-1 BAX9s K Lampholders for bayonet Douilles pour culots à
caps baïonnette
7005-9-1 BAY9s K Lampholders for bayonet Douilles pour culots à
caps baïonnette
7005-10-8 B22d 21 Bayonet lampholders Douilles à baïonnette
7005-10A-4 B22d-3(90°/135°) M Bayonet lampholders Douilles à baïonnette
7005-11-3 BA7 G Lampholders for bayonet Douilles pour culots à
automobile caps baïonnette pour automobiles
7005-12-2 BA9 G Lampholders for bayonet Douilles pour culots à
automobile caps baïonnette pour automobiles
7005-13-6 BA15,BA15- 55 Lampholders Douilles
3(110°),BAU15,BAU15-
3(110°),BAW15,BAW15-
3(110°),BAY15,BAY15-
3(110°),BAZ15,BAZ15-
3(110°)
7005-14-2 BA20 G Lampholders for bayonet Douilles pour culots à
automobile caps baïonnette pour automobiles
7005-15-2 BA21-3 J Lampholders for bayonet Douilles pour culots à
caps baïonnette
7005-16-4 B15d 21 Bayonet lampholders Douilles à baïonnette
7005-17-5 BY22d M Bayonet lampholders Douilles à baïonnette
7005-19-1 BAU15s M Lampholder for bayonet Douille pour culots à
caps baïonnette
7005-20-6 E5,E10,E17,E27,E40 38 Position of holder thread in Position de la chemise
relation to central contact of filetée de la douille Edison
the Edison lampholder par rapport au contact
central
7005-21A-1 E26 20 Lampholders Douilles
7005-24A-3 E39 21 Lampholders Douilles
7005-28-1 E12 J Lampholder Douille
7005-29-2 E26d C Position of holder thread in Position de la chemise
relation to the central and filetée par rapport aux
intermediate contacts of the contacts central et
lampholder intermédiaire de la douille
7005-30-1 EP10 K Prefocus lampholder Douille préfocus
7005-31-2 P20,PX20,PY20,PZ20 20 Lampholders Douilles
7005-32-2 P22,PX22 20 Lampholders Douilles
7005-33-1 2G13 M Lampholders Douilles
7005-34-1 PX43t H Lampholder Douille
7005-35-1 PX13.5s H Lampholder Douille
7005-36-1 P26s F Lampholder Douille
7005-37-1 PKX22s 20 Lampholder Douille
7005-39-4 P43t 28 Lampholders Douilles
7005-42-6 P28s M Prefocus lampholders Douilles préfocus
7005-43-3 P40 Prefocus lampholder Douille préfocus
IEC 60061-2:1969/AMD62:2026 © IEC 2026
Sheet
System Designation AMD Name English Nom Français
Feuilles
7005-44-2 P30s,P30s-10.3 Precision holder for Douille de précision pour
prefocus cap culot préfocus
7005-45-2 G17q,GX17q,GY17q M Lampholders Douilles
7005-46-3 P14.5s H Lampholder for automobile Douille pour automobiles
lamps
7005-47-2 PK22s N Lampholder Douille
7005-50-4 G13 20 Mounting distance of a Distance de montage pour
combined pair of inflexible ensemble de deux douilles
lampholders non flexibles
7005-51-4 G5 38 Mounting distance of a Distance de montage pour
combined pair of inflexible ensemble de deux douilles
lampholders non flexibles
7005-51A-1 GX5 38 Mounting distance of a Distance de montage pour
combined pair of ensemble de deux douilles
lampholders
7005-53-4 R7s,RX7s 30 Combined pairs of Combinaisons de deux
lampholders douilles
7005-53A-5 R7s,RX7s 34 Lampholders Douilles
7005-55-3 Fa6 J Lampholder Douille
7005-56-2 G10q 20 Lampholder Douille
7005-57-1 R17d G Lampholder for recessed Douille pour culot à deux
double contact cap contacts en retrait
7005-58-1 Fa8 23 Lampholders and Douilles et connecteurs
connectors
7005-59-2 G6.35,GX6.35,GY6.35 24 Lampholders Douilles
7005-59A-3 GZ6.35 21 Connector Connecteur
7005-63-3 G12 26 Lampholder Douille
7005-64-4 PG12-.,PGX12-. 20 Lampholders Douilles
7005-65-1 GX38q F Lampholder Douille
7005-66-1 P29 K Lampholder Douille
7005-67-1 GZ4 J Connector for bi-pin lamp Connecteur pour socle de
base lampe à deux broches
7005-68-4 GR8 28 Lampholder Douille
7005-69-1 G23 H Lampholder Douille
7005-70-1 G9.5 G Lampholder Douille
7005-70-2 G9.5 47 Lampholders Douilles
7005-70A-2 GX9.5 D Lampholder Douille
7005-70A-3 GX9.5 47 Lampholders Douilles
7005-70B-2 GY9.5,GZ9.5,GZX9.5,G N Lampholders Douilles
ZY9.5,GZZ9.5
7005-72-2 G4 20 Lampholder Douille
7005-73-1 G5.3 E Lampholders Douilles
7005-73A-5 GX5.3 33 Lampholders Douilles
7005-73B-5 GY5.3 33 Lampholders Douilles
7005-75-4 G22 Lampholders Douilles
7005-76-2 G38 M Lampholders Douilles
7005-77-3 GR10q 28 Lampholder Douille
7005-78-7 G24,GX24,GY24 32 Lampholders Douilles
7005-79-1 P11.5d K Lampholder Douille
IEC 60061-2:1969/AMD62:2026 © IEC 2026
Sheet
System Designation AMD Name English Nom Français
Feuilles
7005-80-4 SV7 & SV8.5 & SVX8.5 55 Principles for design of Principes pour la
lampholders construction des douilles
7005-82-3 2G11 41 Lampholders Douilles
7005-82A-1 2GX11 41 Lampholders Douilles
7005-83-1 SK15s G Mounting of a combined Distance de montage pour
pair of lampholders for ensemble de deux douilles
tubular infra-red lamps with pour lampes tubulaires à
caps radiation infrarouge munies
des culots
7005-84-2 GX10q-. M Lampholders Douilles
7005-85-2 GY10q-. M Lampholders Douilles
7005-86-1 GX23 J Lampholder Douille
7005-87-3 G32,GX32,GY32 M Lampholders Douilles
7005-88-1 PY43d J Lampholder Douille
7005-89-1 PZ43t J Lampholder Douille
7005-90-2 W10.6×8.5d Lampholder for photo-flash Douille pour lampes flash
lamps
7005-91-1 W2.1×9.5d E Lampholder (rigid) Douille (rigide)
7005-91-2 W2.1×9.5d,WX2.1×9.5d 55 Lampholders (rigid) Douilles (rigides)
7005-94-2 W2×4.6d F Lampholder (rigid) Douille (rigide)
7005-95-2 P45t M Lampholder Douille
7005-97-1 SX4s 33 Holders Douilles
7005-99-2 X511 E Lampholder for automobile Douille pour lampes pour
lamps automobiles
7005-101-1 GRX10q-. K Lampholders Douilles
7005-102-1 2G7 K Lampholder Douille
7005-103-1 2GX7 K Lampholder Douille
7005-104-1 W2.5×16 R Lampholders Douilles
7005-104A-1 WX2.5×16 20 Lampholders Douilles
7005-104B-1 WY2.5×16 25 Lampholders Douilles
7005-104C-1 WZ2.5×16 25 Lampholders Douilles
7005-104D-1 WU2.5×16 28 Lampholders Douilles
7005-105-2 W3×16d,WX3×16d 22 Lampholders Douilles
7005-106-3 W3×16q,WX3×16q,WY3 33 Holders Douilles
×16q
7005-107-2 PG13,PGJ13 20 Connectors and mounting Connecteurs et orifices de
holes montage
7005-108-2 GU4 Q Lampholder Douille
7005-109-2 GU5.3 23 Lampholder Douille
7005-110-3 PGJ19 47 Holders and connectors Douilles et connecteurs
7005-110A-1 PGJX19 57 Prefocus holders Douilles préfocus
7005-111-5 P32d & PK32d 51 Lampholders Douilles
7005-112-1 S14 N Lampholders Douilles
7005-113-2 GU7 31 Lampholder Douille
7005-114-1 Fc2 28 Lampholder Douille
7005-115-1 W4.3×8.5d Q Lampholder Douille
7005-116-1 EZ10 Q Lampholder Douille
7005-118-1 2G10 S Lampholders Douilles
IEC 60061-2:1969/AMD62:2026 © IEC 2026
Sheet
System Designation AMD Name English Nom Français
Feuilles
7005-119-1 GY22 18 Lampholder Douille
7005-120-2 GZ10 29 Lampholder Douille
7005-121-2 GU10 29 Lampholder Douille
7005-122-2 G8.5 Type A 39 Lampholder Douille
7005-123-1 GU10q 23 Lampholder Douille
7005-124-1 GZ10q 23 Lampholder Douille
7005-125-2 2GX13 26 Lampholder Douille
7005-126-1 G5.3-4.8 23 Connector Connecteur
7005-127-2 PG20,PGU20 32 Lampholders and Douilles et connecteurs
connectors
7005-128-3 P(X)(Y)26.4t,PJ26.4t 38 Lampholders Douilles
7005-129-2 G9 41 Lampholders Douilles
7005-131-1 GRZ10d 28 Lampholder Douille
7005-132-1 GRZ10t 28 Lampholder Douille
7005-133-1 P38t 29 Lampholders Douilles
7005-135-1 GX12 29 Lampholder Douille
7005-136-1 GZX7d-.,GZY7d-.,GZZ 33 Printed circuit connectors Connecteurs pour circuit
7d-. imprimé
7005-137-1 GUX2.5d,GUY2.5d,GUZ 33 Printed circuit connectors Connecteurs pour circuit
2.5d imprimé
7005-138-1 P23t 31 Holder Douille
7005-138A-1 PX23t 38 Holder Douille
7005-139-1 G7.9,GX7.9 31 Lampholders Douilles
7005-140-1 B8.4d,BX8.4d 31 Holders Douilles
7005-141-2 2G8 35 Lampholders Douilles
7005-142-2 GX53 35 Holders Douilles
7005-143-1 GX8.5 33 Connector/Holder Connecteur/Douille
7005-144-3 GX10 44 Lampholder Douille
7005-146-2 PGJY19 47 Holders Douilles
7005-146-2 PGJY19 47Cor Holders Douilles
7005-147-1 PG18.5d 34 Lampholders and Douilles et connecteurs
connectors
7005-148-2 PGZ12 38 Holders Douilles
7005-149-1 BAW9s 35 Holders Douilles
7005-150-1 BAZ9s 35 Holders Douilles
7005-150A-1 BAU9s 40 Holders Douilles
7005-150B-1 BAUZ9s 40 Holders Douilles
7005-151-1 WZ3×16q 35 Lampholder Douille
7005-152-1 GU6.5 36 Lampholder Douille
7005-153-1 PGJ5 36 Lampholder Douille
7005-154-2 GU16d/GX16d Type 1 43 Connector Connecteur
7005-155-1 PGJ23t 37 Holders Douilles
7005-156-1 PGJ(X)50 39 Lampholder Douille
7005-157-1 GR14q 40 Holders Douilles
7005-158-2 PU20d 61 Holders and connectors Douilles et connecteurs
7005-161-1 G28d 40 Holders Douilles
IEC 60061-2:1969/AMD62:2026 © IEC 2026
Sheet
System Designation AMD Name English Nom Français
Feuilles
7005-162-1 CH14.65d 42 Printed circuit connectors Connecteurs pour circuit
imprimé
7005-163-2 PGZ18 & PGZX18 47 Lampholders Douilles
7005-164-3 WP3.3×14.5 49 Holders Douilles
7005-165-1 PGJ21t 43 Holders Douilles
7005-166-2 GU8.5 56 Holders Douilles
7005-169-1 PGJX28 44 Lampholder Douille
7005-170-1 GUZ10 45 Holders Douilles
7005-171-2 PU43t 48 Lampholder Douille
7005-173-1 BA15d-3(100°/130°) 48 Bayonet lampholders Douilles à baionnette
7005-174-1 G14.5 & GX14.5 48 Lampholder Douille
7005-175-2 GUZ5.3-. 52 Lampholders Douilles
7005-176-1 WUX2.5×16d 49 Lampholders Douilles
7005-177-1 WUY2.5×16d 49 Lampholders Douilles
7005-178-1 WUZ2.5×16q 49 Lampholders Douilles
7005-179-1 WUU2.5×16q 49 Lampholders Douilles
7005-180-1 WZX2.5×16q 49 Lampholders Douilles
7005-181-1 WZY2.5×16q 49 Lampholders Douilles
7005-182-1 PGJY50 49 Holders Douilles
7005-183-2 GX16t-5 53 Combined pair of Paire combinée de douilles
lampholders
7005-184-1 PGJX36 50 Holders Douilles
7005-185-3 PGJ18.5d/t 57 Holder Douille
7005-186-1 GH36d-… 54 Holders Douilles
7005-187-2 GR6d-. 56 Holders Douilles
7005-187A-2 GR6d-. 56 Mounting distance of a Distance de montage pour
combined pair of holders une paire combinée de
douilles
7005-188-2 GJ6.6 60 Holders Douilles
7005-188A-1 GJ6.6 59 Mounting distance of a Distance de montage pour
combined pair of inflexible une paire combinée de
lampholders douilles non flexibles
7005-189-1 PAJxx.4p-n 62 Lampholders Douilles
IEC 60061-2:1969/AMD62:2026 © IEC 2026
CONTENTS BY DESIGNATION / SOMMAIRE PAR DESIGNATION
Sheet
System Designation AMD Name English Nom Français
Feuilles
2G10 7005-118-1 S Lampholders Douilles
2G11 7005-82-3 41 Lampholders Douilles
2G13 7005-33-1 M Lampholders Douilles
2G7 7005-102-1 K Lampholder Douille
2G8 7005-141-2 35 Lampholders Douilles
2GX11 7005-82A-1 41 Lampholders Douilles
2GX13 7005-125-2 26 Lampholder Douille
2GX7 7005-103-1 K Lampholder Douille
B15d 7005-16-4 21 Bayonet lampholders Douilles à baïonnette
B22d 7005-10-8 21 Bayonet lampholders Douilles à baïonnette
B22d-3(90°/135°) 7005-10A-4 M Bayonet lampholders Douilles à baïonnette
B8.4d,BX8.4d 7005-140-1 31 Holders Douilles
BA15,BA15- 7005-13-6 55 Lampholders Douilles
3(110°),BAU15,BAU15-
3(110°),BAW15,BAW15-
3(110°),BAY15,BAY15-
3(110°),BAZ15,BAZ15-
3(110°)
BA15d-3(100°/130°) 7005-173-1 48 Bayonet lampholders Douilles à baionnette
BA20 7005-14-2 G Lampholders for bayonet Douilles pour culots à
automobile caps baïonnette pour automobiles
BA21-3 7005-15-2 J Lampholders for bayonet Douilles pour culots à
caps baïonnette
BA7 7005-11-3 G Lampholders for bayonet Douilles pour culots à
automobile caps baïonnette pour automobiles
BA9 7005-12-2 G Lampholders for bayonet Douilles pour culots à
automobile caps baïonnette pour automobiles
BAU15s 7005-19-1 M Lampholder for bayonet Douille pour culots à
caps baïonnette
BAU9s 7005-150A-1 40 Holders Douilles
BAUZ9s 7005-150B-1 40 Holders Douilles
BAW9s 7005-149-1 35 Holders Douilles
BAX9s 7005-8-1 K Lampholders for bayonet Douilles pour culots à
caps baïonnette
BAY9s 7005-9-1 K Lampholders for bayonet Douilles pour culots à
caps baïonnette
BAZ9s 7005-150-1 35 Holders Douilles
BY22d 7005-17-5 M Bayonet lampholders Douilles à baïonnette
CH14.65d 7005-162-1 42 Printed circuit connectors Connecteurs pour circuit
imprimé
E11 7005-6-1 K Lampholder Douille
E12 7005-28-1 J Lampholder Douille
E26 7005-21A-1 20 Lampholders Douilles
E26d 7005-29-2 C Position of holder thread in Position de la chemise
relation to the central and filetée par rapport aux
intermediate contacts of the contacts central et
lampholder intermédiaire de la douille
E39 7005-24A-3 21 Lampholders Douilles
IEC 60061-2:1969/AMD62:2026 © IEC 2026
Sheet
System Designation AMD Name English Nom Français
Feuilles
E5,E10,E17,E27,E40 7005-20-6 38 Position of holder thread in Position de la chemise
relation to central contact of filetée de la douille Edison
the Edison lampholder par rapport au contact
central
EP10 7005-30-1 K Prefocus lampholder Douille préfocus
EY10 7005-7-1 L Lampholder Douille
EZ10 7005-116-1 Q Lampholder Douille
Fa6 7005-55-3 J Lampholder Douille
Fa8 7005-58-1 23 Lampholders and Douilles et connecteurs
connectors
Fc2 7005-114-1 28 Lampholder Douille
G10q 7005-56-2 20 Lampholder Douille
G12 7005-63-3 26 Lampholder Douille
G13 7005-50-4 20 Mounting distance of a Distance de montage pour
combined pair of inflexible ensemble de deux douilles
lampholders non flexibles
G14.5 & GX14.5 7005-174-1 48 Lampholder Douille
G17q,GX17q,GY17q 7005-45-2 M Lampholders Douilles
G22 7005-75-4 Lampholders Douilles
G23 7005-69-1 H Lampholder Douille
G24,GX24,GY24 7005-78-7 32 Lampholders Douilles
G28d 7005-161-1 40 Holders Douilles
G32,GX32,GY32 7005-87-3 M Lampholders Douilles
G38 7005-76-2 M Lampholders Douilles
G4 7005-72-2 20 Lampholder Douille
G5 7005-51-4 38 Mounting distance of a Distance de montage pour
combined pair of inflexible ensemble de deux douilles
lampholders non flexibles
G5.3 7005-73-1 E Lampholders Douilles
G5.3-4.8 7005-126-1 23 Connector Connecteur
G6.35,GX6.35,GY6.35 7005-59-2 24 Lampholders Douilles
G7.9,GX7.9 7005-139-1 31 Lampholders Douilles
G8.5 Type A 7005-122-2 39 Lampholder Douille
G9 7005-129-2 41 Lampholders Douilles
G9.5 7005-70-2 47 Lampholders Douilles
7005-186-1 54 Holders Douilles
GH36d-…
GJ6.6 7005-188-2 60 Holders Douilles
GJ6.6 7005-188A-1 59 Mounting distance of a Distance de montage pour
combined pair of inflexible une paire combinée de
lampholders douilles non flexibles
GR10q 7005-77-3 28 Lampholder Douille
GR14q 7005-157-1 40 Holders Douilles
GR6d-. 7005-187-2 56 Holders Douilles
GR6d-. 7005-187A-2 56 Mounting distance of a Distance de montage pour
combined pair of holders une paire combinée de
douilles
GR8 7005-68-4 28 Lampholder Douille
GRX10q-. 7005-101-1 K Lampholders Douilles
GRZ10d 7005-131-1 28 Lampholder Douille
GRZ10t 7005-132-1 28 Lampholder Douille
IEC 60061-2:1969/AMD62:2026 © IEC 2026
Sheet
System Designation AMD Name English Nom Français
Feuilles
GU10 7005-121-2 29 Lampholder Douille
GU10q 7005-123-1 23 Lampholder Douille
GU16d/GX16d Type 1 7005-154-2 43 Connector Connecteur
GU4 7005-108-2 Q Lampholder Douille
GU5.3 7005-109-2 23 Lampholder Douille
GU6.5 7005-152-1 36 Lampholder Douille
GU7 7005-113-2 31 Lampholder Douille
GU8.5 7005-166-2 56 Holders Douilles
GUX2.5d,GUY2.5d,GUZ 7005-137-1 33 Printed circuit connectors Connecteurs pour circuit
2.5d imprimé
GUZ10 7005-170-1 45 Holders Douilles
GUZ5.3-. 7005-175-2 52 Lampholders Douilles
GX10 7005-144-3 44 Lampholder Douille
GX10q-. 7005-84-2 M Lampholders Douilles
GX12 7005-135-1 29 Lampholder Douille
GX16t-5 7005-183-2 53 Combined pair of Paire combinée de douilles
lampholders
GX23 7005-86-1 J Lampholder Douille
GX38q 7005-65-1 F Lampholder Douille
GX5 7005-51A-1 38 Mounting distance of a Distance de montage pour
combined pair of ensemble de deux douilles
lampholders
GX5.3 7005-73A-5 33 Lampholders Douilles
GX53 7005-142-2 35 Holders Douilles
GX8.5 7005-143-1 33 Connector/Holder Connecteur/Douille
GX9.5 7005-70A-3 47 Lampholders Douilles
GY10q-. 7005-85-2 M Lampholders Douilles
GY22 7005-119-1 18 Lampholder Douille
GY5.3 7005-73B-5 33 Lampholders Douilles
GY9.5,GZ9.5,GZX9.5,G 7005-70B-2 N Lampholders Douilles
ZY9.5,GZZ9.5
GZ10 7005-120-2 29 Lampholder Douille
GZ10q 7005-124-1 23
...



