iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60044-2:1999

(Main)

Instrument transformers - Part 2: Inductive voltage transformers

Instrument transformers - Part 2: Inductive voltage transformers

Applies to new inductive voltage transformers for use with electrical measuring instruments and electrical protective devices at frequencies from 15 to 100 Hz. This standard relates basically to transformers with separate windings, but also to autotransformers. It replaces HD 554(92) plus Amendments 1 and 2 only for inductive voltage transformers. HD 554 remains in force for capacitive voltage transformers.

Messwandler - Teil 2: Induktive Spannungswandler

Transformateurs de mesure - Partie 2: Transformateurs inductifs de tension

S'applique aux transformateurs inductifs neufs destinées à être utilisés avec des appareils de mesure électriques et des dispositifs électriques de protection, de fréquence comprise entre 15 Hz et 100 Hz. La norme s'applique principalement aux transformateurs à enroulements séparés, mais aussi aux autotransformateurs. Elle annule et remplace la deuxième édition de la HD 554 et les amendements 1 et 2, pour les transformateurs inductifs de tension. La HD 554 reste encore en viguer pour les transformateurs condensateurs de tension.

Merilni transformatorji - 2. del: Induktivni napetostnik (IEC 60044-2:1997, spremenjen)

General Information

Status
Withdrawn
Publication Date
15-Mar-1999
Withdrawal Date
31-Dec-2001
ICS
29.180 - Transformers. Reactors
Technical Committee
CLC/TC 38 - Instrument transformers
Drafting Committee
IEC/TC 38 - IEC_TC_38
Parallel Committee
IEC/TC 38 - IEC_TC_38
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Aug-2014
Completion Date
17-Aug-2014
Directive
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
SIST EN 60044-2:2001 - Instrument transformers -- Part 2: Inductive voltage transformers

Relations

Replaces
HD 554 S1:1992 - Voltage transformers
Effective Date
29-Jan-2023
Replaced By
EN 61869-3:2011 - Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
Effective Date
29-Jan-2023
Amended By
EN 60044-2:1999/A2:2003 - Instrument transformers - Part 2: Inductive voltage transformers
Effective Date
29-Jan-2023
Amended By
EN 60044-2:1999/A1:2000 - Instrument transformers - Part 2: Inductive voltage transformers
Effective Date
28-Jan-2023

Buy Standard

EN 60044-2:2001EN 60044-2:2001
PreviousNext
Standard
EN 60044-2:2001
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2001
1DGRPHãþD
SIST HD 554 S1:1995
Merilni transformatorji - 2. del: Induktivni napetostnik (IEC 60044-2:1997,
spremenjen)
Instrument transformers -- Part 2: Inductive voltage transformers
Messwandler -- Teil 2: Induktive Spannungswandler
Transformateurs de mesure -- Partie 2: Transformateurs inductifs de tension
Ta slovenski standard je istoveten z: EN 60044-2:1999
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 6004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61558-2-10:2024(Main)
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
SIST EN IEC 61558-2-10:2024

IEC 61558-2-10:2024 is available as IEC 61558-2-10:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61558-2-10:2024 deals with the safety of separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V. Transformers incorporating electronic circuits are also covered by this document. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) adjustment of structure and references in accordance with IEC 61558-1:2017; b) overvoltage categories I, II, III and IV for clearances and dielectric strength tests are included; c) clearances for homogenous field conditions deleted. It has the status of a group safety publication in accordance with IEC Guide 104.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50719:2024(Main)
Connecting terminal flags for bushings from 250 A to 4 000 A for insulating liquid filled transformers
SIST EN 50719:2024

This document is applicable to vertical connecting terminal flags for insulated bushings with rated currents from 250 A to 4 000 A and frequencies from 15 Hz to 60 Hz for liquid immersed equipment.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60076-22-7:2020/AC:2023-07(Corrigendum)
Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings
SIST EN IEC 60076-22-7:2020/AC:2023
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60076-19-1:2023(Main)
Power transformers - Part 19-1: Rules for the determination of uncertainties in the measurement of the losses of power transformers
SIST EN IEC 60076-19:2023

IEC 60076-19-1:2023 defines the procedures that are applied to evaluate the uncertainty affecting the measurements of no-load and load losses during the routine tests on power transformers. This document centres on measuring systems utilizing digital instruments, although the procedures can be adapted to evaluation of systems with analogue instruments where further uncertainty sources have to be taken into account. This document specifies how to determine measurement uncertainty and how to apply corrections for known errors in the measurement chain. Information vis-à-vis judgement and traceability are given in IEC 60076-8:1997, 10.1 and 10.2.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60076-25:2023(Main)
Power transformers - Part 25: Neutral grounding resistors
SIST EN IEC 60076-25:2023

IEC 60076-25:2023 applies to dry type natural air-cooled resistors, for neutral grounding of transformers and generators, in order to limit the earth fault current in power systems by means of metallic resistive elements. For the purposes of this document, the resistor can be:  
used alone or in combination with other electrotechnical products not covered by this document, such as (but not limited to): a step-down single-phase transformer, an open triangle or zig-zag transformer (where the neutral point is not available) and a Petersen coil reactor (in order to increase active power contribution to the fault or reduce time constant for proper protection operation or both);
designed, manufactured and verified on a one-off basis or fully standardized and manufactured in quantity.  Both terms "neutral grounding resistor" (NGR) and "neutral earthing resistor" (NER) can be used. However, for the purposes of this document and in order to avoid any confusion with "neutral earthing reactor" (NER), the term "neutral grounding resistor" (NGR) is used. This document specifies:  
the characteristics of the NGR;
the service conditions requirements for NGRs;
the tests and test methods for confirming that these conditions have been met;
the requirements relating to marking for NGRs.  Annex A provides guidance on how to consider the effect of resistance variation with temperature.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50708-3-4:2022(Main)
Power transformers - Additional European requirements - Part 3-4: Large power transformer - Special tests for corrugated tank and radiators
SIST EN 50708-3-4:2022

This document describes a special test for tanks of liquid-immersed transformers which during service are hermetically sealed and fully filled with liquid and volume change of the liquid due to temperature change compensated by elastic deformation of the cooling element for Large Power Transformers having a rated power greater than 3150 kVA.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50708-2-3:2022(Main)
Power transformers - Additional European requirements - Part 2-3: Medium power transformer - Accessories
SIST EN 50708-2-3:2022

This document describes the list of typical accessories used for liquid and dry type Medium Power Transformers (≤ 3 150 kVA).

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50708-2-6:2022(Main)
Power transformers - Additional European requirements - Part 2-6: Medium power transformers - Non-conventional magnetic steel technology
SIST EN 50708-2-6:2022

This document defines the energy performance of non-conventional technology Medium Power Transformers in compliance with EN 50708-1-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50708-2-4:2022(Main)
Power transformers - Additional European requirements - Part 2-4: Medium power transformer - Special tests
SIST EN 50708-2-4:2022

This document describes the special tests for Medium Power Transformers ≤ 3150 kVA compliant with the EN 50708 2 series: - for corrugated tank for liquid immersed transformers, - for the method of measurement of losses for one winding in Highest Voltage (HV) and windings in Lowest Voltage (LV) for liquid immersed and dry type transformers.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50243:2022(Main)
Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
SIST EN 50243:2022

This document is applicable to ceramic insulated outdoor bushings for highest voltages for equipment of 24 kV and 36 kV, with rated currents of 5 kA and 8 kA for insulating liquid filled transformers and frequencies from 15 Hz up to 60 Hz. This document establishes dimensions to ensure interchangeability and adequate mounting of bushings. Two types of construction are specified, type A and type B, both types for highest voltages for equipment 24 kV and 36 kV and rated currents of 5 kA and 8 kA. The mechanical stresses of the conductor tube define the difference between type A and type B. The conductor tube of type A is axially and radially fixed in the top of the bushing. The inner line terminal of the transformer can be flexible and without any special support for the lower end of the conductor tube. For new installations bushings of Type A are expected to be used. Type B bushings can be supplied at the request of a customer. In case of type B, the conductor tube is only radially fixed in the top of the bushing. In that case, a rigid support is mounted to fix the lower end of the conductor tube (for example, in combination with a drip proofed sealing end). The drip proofed sealing end is often required in the service requirements. In this case, it is not possible to use type A because of the existing double fixation. Therefore, both bushing types A and B are specified. The condition for the usage of type B is that the drip-proof sealing end is able to withstand the mechanical stress in axial direction.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day