EN 60811-410:2012

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NVLGDWLYQRKabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 410: Sonstige Prüfungen - Prüfverfahren für die Sauerstoffalterung unter Kupfereinfluss für polyolefinisolierte LeiterCâbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 410: Essais divers - Méthode d'essai pour la mesure de la dégradation par oxydation catalytique par le cuivre des conducteurs isolés aux polyoléfinesElectric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalysed oxidative degradation of polyolefin insulated conductors29.060.20KabliCables29.035.20PDWHULDOLPlastics and rubber insulating materialsICS:Ta slovenski standard je istoveten z:EN 60811-410:2012SIST EN 60811-410:2012en,fr,de01-september-2012SIST EN 60811-410:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60811-410 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-410:2012 E
ICS 29.035.01; 29.060.20 Supersedes EN 60811-4-2:2004 (partially)
English version
Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 410: Miscellaneous tests -
Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors (IEC 60811-410:2012)
Câbles électriques et à fibres optiques -
Méthodes d'essai pour les matériaux non-métalliques -
Partie 410: Essais divers -
Méthode d'essai pour la mesure de la dégradation par oxydation catalytique par le cuivre des conducteurs isolés aux polyoléfines (CEI 60811-410:2012)
Kabel, isolierte Leitungen und Glasfaserkabel -
Prüfverfahren für nichtmetallene Werkstoffe -
Teil 410: Sonstige Prüfungen -
Prüfverfahren für die Sauerstoffalterung unter Kupfereinfluss für polyolefinisolierte Leiter (IEC 60811-410:2012)
This European Standard was approved by CENELEC on 2012-04-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 20/1294/FDIS, future edition 1 of IEC 60811-410, prepared by IEC/TC 20 "Electric cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60811-410:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-01-16 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-04-16
This document supersedes Annex B of EN 60811-4-2:2004 (partially). Full details of the replacements are shown in Annex A of EN 60811-100:2012. There are no technical changes with respect to EN 60811-4-2:2004, but see the Foreword to EN 60811-100:2012. This standard is to be read in conjunction with EN 60811-100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60811-410:2012 was approved by CENELEC as a European Standard without any modification.
- 3 - EN 60811-410:2012
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60811-100 2012 Electric and optical fibre cables - Test methods for non-metallic materials -
Part 100: General EN 60811-100 2012
IEC 60811-410 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables – Test methods for non-metallic materials –
Part 410: Miscellaneous tests – Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux non-métalliques –
Partie 410: Essais divers – Méthode d’essai pour la mesure de la dégradation
par oxydation catalytique par le cuivre des conducteurs isolés aux polyoléfines
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE L ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912-972-0
– 2 – 60811-410  IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Apparatus . 6 4.3 Sample and test pieces preparation. 7 4.4 Test procedure . 7 4.5 Measurements . 8 5 Test report. 8 Annex A (normative)
Instrument calibration . 10 Bibliography . 11
Figure 1 – Evaluation of OIT from recorded-time-based thermogram . 9 Figure A.1 – Representative melting endothermic for indium . 10
60811-410  IEC:2012 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –
Part 410: Miscellaneous tests –
Test method for copper-catalyzed oxidative degradation
of polyolefin insulated conductors
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC it
...