EN 62827-1:2016

SLOVENSKI STANDARD
01-maj-2017
%UH]åLþQLSUHQRVPRþL8SUDYOMDQMHGHO6NXSQHNRPSRQHQWH7$
Wireless Power Transfer - Management - Part 1: Common Components (TA 15)
Ta slovenski standard je istoveten z: EN 62827-1:2016
ICS:
29.240.99 'UXJDRSUHPDY]YH]L] Other equipment related to
RPUHåML]DSUHQRVLQ power transmission and
GLVWULEXFLMRHOHNWULþQHHQHUJLMH distribution networks
35.240.99 8SRUDEQLãNHUHãLWYH,7QD IT applications in other fields
GUXJLKSRGURþMLK
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62827-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2016
ICS 29.240.99; 35.240.99
English Version
Wireless Power Transfer - Management - Part 1: Common
Components
(IEC 62827-1:2016)
Transfert de puissance sans fil - Gestion - Partie 1: Drahtlose Energieübertragung - Management - Teil 1:
Composants communs Gemeinsame Komponenten
(IEC 62827-1:2016) (IEC 62827-1:2016)
This European Standard was approved by CENELEC on 2016-06-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62827-1:2016 E
European foreword
The text of document 100/2451/CDV, future edition 1 of IEC 62827-1, prepared by Technical Area 15
“Wireless power transfer” of IEC/TC 100 “Audio, video and multimedia systems and equipment” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62827-1:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2017-05-18
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-11-18
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62827-1:2016 was approved by CENELEC as a European
Standard without any modification.
IEC 62827-1 ®
Edition 1.0 2016-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Wireless power transfer – Management –

Part 1: Common components
Transfert de puissance sans fil – Gestion –

Partie 1: Composants communs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.240.99; 35.240.99 ISBN 978-2-8322-3248-4

– 2 – IEC 62827-1:2016 © IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Terms, definitions and abbreviations . 6
2.1 Terms and definitions . 6
2.2 Abbreviations . 7
3 Overview . 7
4 Reference models . 8
4.1 General . 8
4.2 WPT of one source to one device (1:1) . 8
4.3 WPT of one source to many devices (1:N) . 9
4.4 A WPT of many sources to many devices (M:N) . 10
4.5 WPMS with WPMS-Rs . 10
5 Components in WPMS-S and WPMS-D . 12
6 Functionalities . 13

Figure 1 – Concept of a wireless power management system . 8
Figure 2 – Structure of 1:1 wireless power transfer network . 9
Figure 3 – Structure of a 1:N wireless power transfer network . 9
Figure 4 – Structure of a M:N wireless power transfer network . 10
Figure 5 – WPMS-R as power receiver . 11
Figure 6 – WPMS-R as power transmitter . 12
Figure 7 – Components of WPMS-S and WPMS-D in WPMS . 12

IEC 62827-1:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
WIRELESS POWER TRANSFER –
MANAGEMENT –
Part 1: Common components
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62827-1 has been prepared by technical area 15: Wireless power
transfer, of IEC technical committee 100: Audio, video and multimedia systems and
equipment.
The text of this standard is based on the following documents:
CDV Report on voting
100/2451/CDV 100/2538/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – IEC 62827-1:2016 © IEC 2016
A list of all parts in the IEC 62827 series, published under the general title Wireless power
transfer – Management, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
IEC 62827-1:2016 © IEC 2016 – 5 –
INTRODUCTION
The IEC 62827 (Wireless power transfer – Management) series provides the management
protocol for a wireless power transfer system in which power sources can deliver power to
receivers at a distance. IEC 62827 consists of the following parts:
– Part 1: Common components
– Part 2: Multiple devices control management
– Part 3: Multiple sources control management
Part 1 of IEC 62827 defines the definition and functionality for a wireless power transfer
system.
Part 2 of IEC 62827 specifies the management protocol of wireless power transfer for multiple
devices.
Part 3 of IEC 62827 specifies the management protocol of wireless power transfer for multiple
sources.
– 6 – IEC 62827-1:2016 © IEC 2016
WIRELESS POWER TRANSFER –
MANAGEMENT –
Part 1: Common components
1 Scope
This part of IEC 62827 specifies common components of management for multiple sources
and devices in a wireless power transfer system, and justifies various functions for wireless
power transfer.
This part of IEC 62827 defines the reference models for possible configurations of a wireless
power transfer system. The models are specified in additional parts in more detail.
NOTE This standard is applied to a wireless power transfer system for audio, video and multimedia equipment.
2 Terms, definitions and abbreviations
2.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1.1
wireless power receiver
device which receives electric power wirelessly
Note 1 to entry: There are two types of wireless power receivers. One is a wireless power receiver with battery.
The other is a wireless power receiver without battery, such as speakers and displays.
2.1.2
wireless power source
transmitter which delivers electric power to power receiver wirelessly
2.1.3
wireless power transfer
transfer of electric power without the physical contact of electrodes
2.1.4
wireless data communication zone
area that includes wireless power sources or wireless power receivers, and enables data
communication without physical contact
Note 1 to entry: A wireless data communication zone includes a wireless power transfer zone.
Note 2 to entry: A wireless data communication zone can be a union of multiple wireless data communication
zones managed by multiple wireless power sources.
2.1.5
wireless p
...