iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50463-3:2017/FprA1:2024

(Amendment)

Railway applications - Energy measurement on board trains - Part 3: Data handling

Railway applications - Energy measurement on board trains - Part 3: Data handling

This New Work Item Proposal has the scope to provide an amendment of the European standard EN 50463-3 in order to update the annex ZZ

Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 3: Daten-Behandlung

Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 3: Traitement des données

Železniške naprave - Merjenje energije na vlaku - 3. del: Ravnanje s podatki - Dopolnilo A1

General Information

Status
Not Published
Publication Date
01-Sep-2024
ICS
45.060.10 - Tractive stock
Technical Committee
CLC/TC 9X - Electrical and electronic applications for railways
Drafting Committee
CLC/TC 9X - Electrical and electronic applications for railways
Current Stage
5060 - Voting results sent to TC, SR - Formal Approval
Start Date
31-May-2024
Due Date
07-Feb-2024
Completion Date
31-May-2024
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
Ref Project
SIST EN 50463-3:2018/oprA1:2023 - Railway applications - Energy measurement on board trains - Part 3: Data handling

Relations

Amends
EN 50463-3:2017 - Railway applications - Energy measurement on board trains - Part 3: Data handling
Effective Date
26-Apr-2022

Buy Standard

EN 50463-3:2018/oprA1:2023EN 50463-3:2018/oprA1:2023
PreviousNext
Draft
EN 50463-3:2018/oprA1:2023
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50463-3:2018/oprA1:2023
01-marec-2023
Železniške naprave - Merjenje energije na vlaku - 3. del: Ravnanje s podatki -
Dopolnilo A1
Railway applications - Energy measurement on board trains - Part 3: Data handling
Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 3: Daten-Behandlung
Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 3: Traitement des
données
Ta slovenski standard je istoveten z: EN 50463-3:2017/prA1
ICS:
45.060.10 Vlečna vozila Tractive stock
SIST EN 50463-3:2018/oprA1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50463-3:2018/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN 50463-3:2018/oprA1:2023


EUROPEAN STANDARD DRAFT
EN 50463-3:2017
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
January 2023
ICS 45.060.10 -
English Version
Railway applications - Energy measurement on board trains -
Part 3: Data handling
Applications ferroviaires - Mesure d'énergie à bord des Bahnanwendungen - Energiemessung auf Bahnfahrzeugen
trains - Partie 3: Traitement des données - Teil 3: Daten-Behandlung
This draft amendment prA1, if approved, will modify the European Standard EN 50463-3:2017; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2023-04-14.

It has been drawn up by CLC/TC 9X.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 75997 Ref. No. EN 50463-3:2017/prA1 E

---------------------- Page: 3 ----------------------
SIST EN 50463-3:2018/oprA1:2023
EN 50463-3:2017/prA1:2023 (E)
Contents Page
European foreword . 3
1 Modification to Annex ZZ . 4
Annex ZZ (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2016/797/EU aimed to be covered . 5
Table ZZ.1 — Correspondence between this European Standard, Commission Regulation (EU) N°
1302/2014 concerning the technical specification for interoperability relating to the
‘rolling stock — locomotives and passenger rolling stock’ subsystem of the rail system in
the European Union* and Directive (EU) 2016/797 . 5
2

---------------------- Page: 4 ----------------------
SIST EN 50463-3:2018/oprA1:2023
EN 50463-3 :2017/prA1:2023 (E)
European foreword
This document (EN 50463-3:2017/prA1:2023) has been prepared by CLC/TC 9X “Electrical and
electronic applications for railways”.
The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50317:2012/A1:2022(Amendment)
Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
SIST EN 50317:2012/A1:2022

This European Standard specifies the functional requirements for output and accuracy of measurements of the dynamic interaction between pantograph and overhead contact line.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50238-3:2022(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters
SIST-TS CLC/TS 50238-3:2022

For the purpose of demonstrating compatibility between rolling stock and axle counter detectors, this document defines the interference limits and evaluation methods to verify rolling stock emissions. Wheel sensors and crossing loops are not covered by this document. This document gives recommended individual limits to be applied to establish compatibility between RST and all selected types of axle counter detectors, including any covered by national standards. The list of selected types of axle counters and their limits for compatibility are drawn on the basis of established performance criteria. It is expected that the trend for newly signalled interoperable lines will be fitted with types that meet the compatibility limits published in the TSI CCS Interfaces Document (ERA/ERTMS/033281). To ensure adequate operational availability, it is essential that the rolling stock complies with the defined limits; otherwise, the established availability of the valid output function of axle counter detectors may be compromised. NOTE The influences from metal parts or inductively coupled resonant circuits on the vehicle, eddy current brakes or magnetic brakes, are not covered by this document but are considered on the basis of national technical specifications. For wheel sensors and wheel detectors in other applications than axle counters but utilizing the same rail sensors and detectors, transient and continuous interference can be considered as equivalent to axle counter detectors or axle counter sensors.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50702:2021(Main)
Railway applications - Rolling stock - Conductor rail current collectors (shoegear): Characteristics and tests
SIST EN 50702:2021

This document specifies the tests for the current collectors to enable current collection from the third or fourth rail system as well as associated fuses and short circuit devices. It also specifies the general assembly characteristics to be applied to current collectors. This document is applicable to all types of vehicles with third or fourth rail current collectors. This document does not apply to roof mounted pantographs.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50238-2:2020(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits
SIST-TS CLC/TS 50238-2:2020

This document defines, for the purpose of ensuring compatibility between rolling stock and track circuits, the limits for interference current emissions from rolling stock. The measurement and evaluation methods for verifying conformity of rolling stock to these limits are presented in a dedicated annex. The interference limits are only applicable to rolling stock that is intended to run on lines exclusively equipped with preferred track circuits listed in this document. The rolling stock test methodology (infrastructure conditions, test configurations, operational conditions, etc.) presented in this document is applicable to establish compatibility with any track circuits. This document gives guidance on the derivation of interference current limits specified for rolling stock and defines measurement methods and evaluation criteria in a dedicated annex. This document defines: a) a set of interference current limits for RST (Rolling Stock) applicable for each of the following types of traction system: 1) DC (750 V, 1,5 kV and 3 kV); 2) 16,7 Hz AC; 3) 50 Hz AC; b) methodology for the demonstration of compatibility between rolling stock and track circuits; c) measurement method to verify interference current limits and evaluation criteria. NOTE 1 The basic parameters of track circuits associated with the interference current limits for RST are not in the scope of this document. NOTE 2 Any phenomena linked to traction power supply and associated protection (over voltage, short-circuit current, under- and over-voltage if regenerative brakes are used) is part of the track circuit design and outside the scope of this document.

  • Technical specification
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50238-1:2019(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General
SIST EN 50238-1:2021

This document describes a process to demonstrate compatibility between Rolling Stock (RST) and Train Detection Systems (TDS). It describes the characterization of train detection systems, rolling stock and traction power supply systems. It is worth noting that the demonstration of technical compatibility between the rolling stock and infrastructure with respect to physical dimensions is not detailed in this document. This document is not generally applicable to those combinations of rolling stock, traction power supply and train detection system which were accepted as compatible prior to the issue of this document. However, as far as is reasonably practicable, this document can be applied to modifications of rolling stock, traction power supply or train detection systems which may affect compatibility. The detailed process can be used where no rules and processes for compatibility are established.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50591:2019(Main)
Railway Applications - Rolling Stock - Specification and verification of energy consumption
SIST EN 50591:2020

The purpose of this document is to support rolling stock procurement, especially life cycle cost (LCC) assessment. This document is applicable to the specification and verification of energy consumption of railway rolling stock. It establishes a criterion for the energy consumption of rolling stock to calculate the total net energy consumed, either at current collector or from the fuel tank, over a predefined service profile, to ensure that the results are directly comparable or representative of the real operation of the train. For this purpose, this document considers the energy consumed and regenerated by the rolling stock. The determination methods covered are the simulation and the measurement. This document provides the framework that gives guidance on the generation of comparable energy performance values for trains and locomotives on a common basis and thereby supports benchmarking and improvement of the energy efficiency of rail vehicles. This document does not cover the comparison of energy consumption with other modes of transportation, or even for comparison between diesel and electric traction, covering only the energy consumption of the railway rolling stock itself.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50463-2:2017/AC:2018-10(Corrigendum)
Railway applications - Energy measurement on board trains - Part 2: Energy measuring
SIST EN 50463-2:2018/AC:2020

TC - Engllish version only; editorial corrections in 4.3.3.4, C.4.5 and E.2.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50239:2018(Main)
Railway applications - Radio remote control system of traction vehicle for shunting application
SIST EN 50239:2018

This European Standard contains the application requirements relevant to the radio remote control of a traction unit for shunting application, operated by personnel not physically located at the controls within the vehicle cab. Requirements specification for radio means and wireless protocols, as well as requirements specification for wireless communication between elements of the train, are not covered by this standard. This European Standard is applicable to newly manufactured vehicles and retrofitted vehicles.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50463-2:2017(Main)
Railway applications - Energy measurement on board trains - Part 2: Energy measuring
SIST EN 50463-2:2018

This European Standard covers the requirements applicable to the Energy Measurement Function (EMF) of an Energy Measurement System (EMS) for use on board traction units for measurement of energy supplied directly from/to the Contact Line system. This European Standard also gives requirements for the Current Measurement Function (e.g. current sensor), the Voltage Measurement Function (e.g. voltage sensor) and the Energy Calculation Function (e.g. energy meter). The Conformity Assessment arrangements for the Voltage Measurement Function, Current Measurement Function, the Energy Calculation Function and a complete Energy Measurement Function are also specified in this document. The standard has been developed taking into account that in some applications the EMF can be subjected to legal metrological control. All relevant metrological aspects are covered in this part. Figure 2 shows the flow between the functional blocks of the EMF. Only connections between the functional blocks required by this standard are displayed. (...)

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50463-4:2017(Main)
Railway applications - Energy measurement on board trains - Part 4: Communication
SIST EN 50463-4:2018

This European Standard applies to the on board and on board to ground communication services, i.e. it covers the data communication using digital interfaces: a) between functions implemented within the EMS; b) between EMS function and other on board subsystems; c) between EMS and ground communication services. The on board data communication services of the EMS cover the data exchange between functions of the EMS and the data exchange between EMS and other on board units, where data are exchanged using a communications protocol stack over a dedicated physical interface or a shared communication network. The on board to ground communication services cover the wireless data communication between the DHS and the on ground server. Furthermore, this document includes conformity assessment requirements.

  • Standard
    165 pages
    English language
    sale 10% off
    e-Library read for
    1 day