EN IEC 62453-303-1:2009/A1:2018

SLOVENSKI STANDARD
01-junij-2018
Specifikacija vmesnika orodja procesne naprave - 303-1. del: Integracija
komunikacijskih profilov - IEC 61784 CP 3/1 in CP 3/2 - Dopolnilo A1 (IEC 62453-
303-1:2009/A1:2016)
Field device tool (FDT) interface specification - Part 303-1: Communication profile
integration - IEC 61784 CP 3/1 and CP 3/2 (IEC 62453-303-1:2009/A1:2016)
)LHOG'HYLFH7RRO)'76FKQLWWVWHOOHQVSH]LILNDWLRQ7HLO,QWHJUDWLRQYRQ
.RPPXQLNDWLRQVSURILOHQ.RPPXQLNDWLRQVSURILOH&3XQGQDFK,(&
,(&$
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-1:
Intégration des profils de communication - CEI 61784 CP 3/1 et CP 3/2 (IEC 62453-303-
1:2009/A1:2016)
Ta slovenski standard je istoveten z: EN IEC 62453-303-1:2009/A1:2018
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62453-303-1:2009/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2018
ICS 25.040; 35.100.05; 35.110
English Version
Field device tool (FDT) interface specification - Part 303-1:
Communication profile integration - IEC 61784 CP 3/1 and CP
3/2
(IEC 62453-303-1:2009/A1:2016)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 303-1: Intégration des profils de 303-1: Integration von Kommunikationsprofilen -
communication - CEI 61784 CP 3/1 et CP 3/2 Kommunikationsprofile (CP) 3/1 und 3/2 nach IEC 61784
(IEC 62453-303-1:2009/A1:2016) (IEC 62453-303-1:2009/A1:2016)
This amendment A1 modifies the European Standard EN 62453-303-1:2009; it was approved by CENELEC on 2016-07-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62453-303-1:2009/A1:2017 E

European foreword
The text of document 65E/336/CDV, future edition IEC 62453-303-1:2009/A1, prepared subcommittee
65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62453-303-1:2009/A1:2018.

The following dates are fixed:
(dop) 2018-08-02
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-02-02
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62453-303-1:2009/A1:2018 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
In Annex ZA of EN 62453:2009 replace IEC 61158-2 by:

IEC 61158-2:2014, Industrial communication networks – Fieldbus specifications – Part 2:
Physical layer specification and service definition

IEC 62453-303-1 ®
Edition 1.0 2016-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Field device tool (FDT) interface specification –

Part 303-1: Communication profile integration – IEC
...