EN IEC 60794-1-209:2024

SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-209:2023
01-maj-2023
Optični kabli - 1-209. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Okoljske preskusne metode - Staranje, metoda F9
Optical fibre cables - Part 1-209: Generic specification - Basic optical cable test
procedures - Environmental test methods - Ageing, Method F9
Ta slovenski standard je istoveten z: prEN IEC 60794-1-209:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-209:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 60794-1-209:2023

oSIST prEN IEC 60794-1-209:2023
86A/2291/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-209 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-03-17 2023-06-09
SUPERSEDES DOCUMENTS:
86A/2233/CD, 86A/2281/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Optical fibre cables - Part 1-209: Generic specification - Basic optical cable test procedures -
Environmental test methods - Ageing, Method F9

PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

oSIST prEN IEC 60794-1-209:2023
IEC CDV 60794-1-209/Ed1 © IEC 2023 – 2 – 86A/2291/CDV
1 CONTENTS
2 CONTENTS . 1
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 Method F9 – Ageing . 5
8 4.1 Object . 5
9 4.2 Sample . 6
10 4.3 Apparatus . 6
11 4.4 Procedure . 6
12 4.5 Requirement . 6
13 4.6 Details to be specified . 6
14 (normative) Colour permanence . 7
oSIST prEN IEC 60794-1-209:2023
IEC CDV 60794-1-209/Ed1 © IEC 2023 – 3 – 86A/2291/CDV
17 INTERNATIONAL ELECTROTECHNICAL COMMISSION
18 ____________
20 OPTICAL FIBRE CABLES –
22 Part 1-209: Generic specification –
23 Basic optical cable test procedures – Environmental test methods -
24 Ageing, Method F9
26 FOREWORD
27 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
28 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
29 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
30 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
31 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
32 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
33 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
34 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
35 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
36 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
37 consensus of opinion on the relevant subjects since each technical committee has representation from all
38 interested IEC National Committees.
39 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
40 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
41 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
42 misinterpretation by any end user.
43 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
44 transparently to the maximum extent possible in their national and regional publications. Any divergence between
45 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
46 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
47 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
48 services carried out by independent certification bodies.
49 6) All users should ensure that they have the latest edition of this publication.
50 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
51 members of its technical committees and IEC National Committees for any personal injury, property damage or
52 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
53 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
54 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
55 indispensable for the correct application of this publication.
56 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
57 rights. IEC shall not be held responsible for identifying any or all such patent rights.
58 International Standard IEC 60794-1-209 has been prepa
...