Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets

IEC 61587-6:2021 specifies security aspects and security performance levels of the mechanical construction of indoor cabinets in accordance with IEC 60917 (all parts) and IEC 60297 (all parts). This document does not address vandalism. This second edition cancels and replaces the first edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Revised and expanded terms and definitions. b) Additional information in 4.2 Access security level of the cabinet. c) Revised requirements for Security performance levels of cabinets and added additional levels in Table 2 – Security performance levels of cabinets. d) Added a column for panel strength in Table 3 – Security performance levels of cabinet – mechanical. e) Revised test for mechanical lock (and hinges added) in 5.2.2 Tests for strength of mechanical locks and hinges. f) Added 5.2.4 Tests for panel strength. g) Added additional description of Key function in Table 5 – Security performance levels of key. h) Revised test method for handles in Annex A.

Mechanische Bauweisen für elektrische und elektronische Einrichtungen - Prüfungen für die Reihen IEC 60917 und IEC 60297 - Teil 6: Sicherheitsaspekte für Innenraumschränke

Structures mécaniques pour équipements électriques et électroniques - Essais pour les séries IEC 60917 et IEC 60297 - Partie 6: Aspects liés à la sécurité des baies intérieures

IEC 61587-6:2021 précise les aspects de sécurité et les niveaux de performance en matière de sécurité de la construction mécanique d’armoires intérieures conformément à l’IEC 60917 (toutes pièces) et à l’IEC 60297 (toutes pièces). Ce document ne traitent pas du vandalisme. Cette deuxième édition annule et remplace la première édition publiée en 2017. Cette édition constitue une révision technique. Cette édition comprend les changements techniques importants suivants par rapport à l’édition précédente : a) Termes et définitions révisés et élargis. b) Informations supplémentaires dans le niveau de sécurité d’accès 4.2 du cabinet. c) Révision des exigences relatives aux niveaux de rendement en matière de sécurité des armoires et ajout de niveaux supplémentaires au tableau 2 – Niveaux de rendement en matière de sécurité des armoires. d) Ajout d’une colonne pour la résistance du panneau dans le tableau 3 – Niveaux de performance de sécurité de l’armoire – mécanique. e) Essai révisé pour serrure mécanique (et charnières ajoutées) dans 5.2.2 Essais de résistance des serrures et charnières mécaniques. f) Ajout de 5.2.4 Tests pour la résistance du panneau. g) Ajout d’une description supplémentaire de la fonction clé dans le tableau 5 – Niveaux de performance de sécurité de la clé. h) Méthode d’essai révisée pour les poignées à l’annexe A.

Mehanske strukture za električno in elektronsko opremo - Preskušanje za skupini standardov IEC 60917 in IEC 60297 - 6. del: Varnostni vidiki za notranje omarice (IEC 61587-6:2021)

General Information

Status
Published
Publication Date
20-May-2021
Current Stage
6060 - Document made available - Publishing
Start Date
21-May-2021
Completion Date
21-May-2021

Relations

Buy Standard

Standard
EN IEC 61587-6:2021 - BARVE
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN 61587-6:2017
Mehanske strukture za električno in elektronsko opremo - Preskušanje za skupini
standardov IEC 60917 in IEC 60297 - 6. del: Varnostni vidiki za notranje omarice
(IEC 61587-6:2021)
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and
IEC 60297 series - Part 6: Security aspects for indoor cabinets (IEC 61587-6:2021)
Mechanische Bauweisen für elektrische und elektronische Einrichtungen - Prüfungen für
die Reihen IEC 60917 und IEC 60297 - Teil 6: Sicherheitsaspekte für
Innenraumschränke (IEC 61587-6:2021)
Structures mécaniques pour équipements électriques et électroniques - Essais pour les
séries IEC 60917 et IEC 60297 - Partie 6 : Aspects liés à la sécurité des baies intérieures
(IEC 61587-6:2021)
Ta slovenski standard je istoveten z: EN IEC 61587-6:2021
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61587-6

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 31.240 Supersedes EN 61587-6:2017 and all of its amendments
and corrigenda (if any)
English Version
Mechanical structures for electrical and electronic equipment -
Tests for IEC 60917 and IEC 60297 series - Part 6: Security
aspects for indoor cabinets
(IEC 61587-6:2021)
Structures mécaniques pour équipements électriques et Mechanische Bauweisen für elektrische und elektronische
électroniques - Essais pour les séries IEC 60917 et IEC Einrichtungen - Prüfungen für die Reihen IEC 60917 und
60297 - Partie 6: Aspects liés à la sécurité des baies IEC 60297 - Teil 6: Sicherheitsaspekte für
intérieures Innenraumschränke
(IEC 61587-6:2021) (IEC 61587-6:2021)
This European Standard was approved by CENELEC on 2021-05-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61587-6:2021 E

European foreword
The text of document 48D/736/FDIS, future edition 2 of IEC 61587-6, prepared by SC 48D
"Mechanical structures for electrical and electronic equipment" of IEC/TC 48 "Electrical connectors
and mechanical structures for electrical and electronic equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61587-6:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-02-17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-05-17
document have to be withdrawn
This document supersedes EN 61587-6:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61587-6:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
ISO/IEC 27001 NOTE Harmonized as EN ISO/IEC 27001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60297 series Mechanical structures for electrical and - -
electronic equipment - Dimensions of
mechanical structures of the 482,6 mm (19
in) series
IEC 60529 - Degrees of protection provided by enclosures - -
(IP Code)
IEC 60917 series Modular order for the development of - -
mechanical structures for electronic
equipment practices
IEC 61587-1 - Mechanical structures for electronic EN 61587-1 -
equipment - Tests for IEC 60917 and IEC
60297 series - Part 1: Environmental
requirements, test set-up and safety aspects
for cabinets, racks, subracks and chassis
under indoor condition use and transportation
IEC 61587-2 - Mechanical structures for electronic EN 61587-2 -
equipment - Tests for IEC 60917 and 60297 -
Part 2: Seismic tests for cabinets and racks

IEC 61587-6 ®
Edition 2.0 2021-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Mechanical structures for electrical and electronic equipment – Tests for

IEC 60917 and IEC 60297 series –

Part 6: Security aspects for indoor cabinets

Structures mécaniques pour équipements électriques et électroniques – Essais

pour les séries IEC 60917 et IEC 60297 –

Partie 6: Aspects liés à la sécurité des baies intérieures

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.240 ISBN 978-2-8322-9607-3

– 2 – IEC 61587-6:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Security aspects for indoor cabinets . 8
4.1 General . 8
4.2 Access security level of the cabinet . 9
5 Security performance levels of cabinets . 10
5.1 General . 10
5.2 Security performance levels of cabinet – Mechanical . 10
5.2.1 General . 10
5.2.2 Tests for strength of mechanical locks and hinges . 11
5.2.3 Tests for operation of handle and mechanical lock . 12
5.2.4 Tests for panel strength . 12
5.3 Key . 13
5.4 Cabinet floor anchoring . 14
Annex A (normative) Mechanical performance and test methods for handles –
Mechanical strengths of levers of handles . 15
A.1 General . 15
A.2 Static loading test, push/pull performance . 15
A.3 Static loading test, turn performance . 16
Bibliography . 18

Figure 1 – Typical mechanical components for security provision of the cabinet . 8
Figure 2 – Concept of access protection within buildings or premises . 9
Figure 3 – Static loading test for mechanical lock and hinges . 11
Figure 4 – Static loading test for panel strength . 13
Figure A.1 – Lever handles' push/pull performance . 16
Figure A.2 – Lever handles' turn performance . 17

Table 1 – Access security levels of indoor cabinet installation sites . 9
Table 2 – Security performance levels of cabinets . 10
Table 3 – Security performance levels of cabinet – Mechanical . 10
Table 4 – Test procedures for operation of handle and mechanical lock . 12
Table 5 – Security performance levels of key . 14
Table 6 – Security performance level of cabinet floor anchoring . 14

IEC 61587-6:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STRUCTURES FOR
ELECTRICAL AND ELECTRONIC EQUIPMENT –
TESTS FOR IEC 60917 AND IEC 60297 SERIES –

Part 6: Security aspects for indoor cabinets

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
member
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.