EN 60061-3:1993/A55:2018
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 3: Lehren
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 3: Calibres
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 3. del: Kalibri - Dopolnilo A55 (IEC 60061-3:1969/A55:2018)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60061-3:2000/A55:2019
01-januar-2019
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 3. del: Kalibri - Dopolnilo A55 (IEC 60061-
3:1969/A55:2018)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 3: Gauges (IEC 60061-3:1969/A55:2018)
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 3: Lehren (IEC 60061-3:1969/A55:2018)
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 3: Calibres (IEC 60061-3:1969/A55:2018)
Ta slovenski standard je istoveten z: EN 60061-3:1993/A55:2018
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60061-3:2000/A55:2019 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60061-3:2000/A55:2019
---------------------- Page: 2 ----------------------
SIST EN 60061-3:2000/A55:2019
EUROPEAN STANDARD EN 60061-3:1993/A55
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2018
ICS 29.140.10
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 3: Gauges
(IEC 60061-3:1969/A55:2018)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 3: der Austauschbarkeit und Sicherheit - Teil 3: Lehren
Calibres (IEC 60061-3:1969/A55:2018)
(IEC 60061-3:1969/A55:2018)
This amendment A55 modifies the European Standard EN 60061-3:1993; it was approved by CENELEC on 2018-09-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-3:1993/A55:2018 E
---------------------- Page: 3 ----------------------
SIST EN 60061-3:2000/A55:2019
EN 60061-3:1993/A55:2018 (E)
European foreword
The text of document 34B/1995/FDIS, future IEC 60061-3/A55, prepared by SC 34B "Lamp caps and
holders" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 60061-3:1993/A55:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-06-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-09-27
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60061-3:1969/A55:2018 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 60061-3:2000/A55:2019
NORME IEC
INTERNATIONALE
INTERNATIONAL 60061-3
STANDARD
AMENDEMENT 55
AMENDMENT 55
2018-08
Amendement 55
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 3:
Calibres
Amendment 55
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 3:
Gauges
Les feuilles de cet amendement sont à insérer dans
l'IEC 600613 (1969)
The sheet
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.